ALLPOWERS S2000 PRO Portable Power Station

1. Safety Instructions

This product is a power station battery. Please follow basic precautions, including:

• Operate the product in a dry and well-ventilated place. Dry thoroughly before use if it gets wet.
• Close monitoring is required when using this product near children to reduce the risk of injury.
• Do not insert fingers into the product to avoid electric shock or other dangers.
• Do not touch the AC interface with metal to prevent electric shock, fire, or other dangers.
• Do not block the product vents during charging or use to prevent permanent damage.
• Do not expose the product to rain and snow.
• Do not use this product in environments with strong static electricity or strong magnetic fields.
• Use only the cable specifically designed for the product. ALLPOWERS is not responsible for damage caused by third-party equipment.
• Do not disassemble the product. For service or maintenance, find a qualified repairer.
• Improper use, falling, or excessive force may damage the product.
• When disposing of used batteries, separate batteries of different electrochemical systems.
• In case of fire, use a dry powder fire extinguisher or immerse in water.
• Keep the product away from fire and heat sources.

2. Specifications

General Information

• Net weight: Approximately 13KG (28.66lbs)
• Size: 375*245*250mm (14.76*9.64*9.84in)
• Battery capacity: 1451.6Wh (43.2V 33.6Ah)
• Bluetooth: Support
• UPS uninterruptible power supply: Support

Input Ports

• AC Input: (100~120)V~15A Max, (220~240)V~7A Max, 50Hz/60Hz
• Solar Input: (12~150)V 13A, 1000W Max
• Car Charger Input: 12V/24V DC

Output Ports

• AC Output: 100-120V/220-240V, 2400W Max (Surged 4000W)
• Note: When the battery drops to 60%, the rated AC output is 2000W Max.
• USB-A *2: 5V 2.4A, 12W Max
• USB-A Fast charging *2: 5V 3A, 9V 2A, 12V 1.5A, 18W Max
• USB-C *2: 5/9/12/15V 3A, 20V 5A, 100W Max
• Car port: 12V 10A, 120W Max
• AC+DC Total Output: 2700W Max

Battery Info

• Battery type: Lithium battery
• Protection type: High temperature protection, Low temperature protection, Over discharge protection, Over charge protection, Overload protection, Short circuit protection, Over current protection

Environmental Operating Temperature

• Charge Temperature: 0°C ~ 40°C (32°F ~ 104°F)
• Discharge Temperature: -10°C ~ 40°C (14°F ~ 104°F)
• Storage Temperature: -20°C ~ 40°C (-4°F ~ 104°F) *recommend 20~30°C
• Operating humidity range: 10% - 90%

Certification

• CE, FC, RoHS, IC

3. User Guide

3.1 Product Appearance Introduction

The product features the following ports and controls:

• AC Output *4
• Car Port Output
• Solar Input (XT60)
• AC Input
• USB-A Output *4
• USB-C Output *2
• DC On/Off Button
• AC On/Off Button
• Power On/Off Button
• LED Display

3.2 Introduction of Display (Touch) Icons

The LED display shows various indicators:

• Battery percentage
• DC connect active icon
• AC connect active icon
• Input power indicator
• Output power indicator
• UPS active icon
• Fan operating indicator
• Time remaining / fault code display
• KFZ output icon
• Output overload icon
• Bluetooth icon
• High temperature warning icon
• Low temperature warning icon

3.3 AC Charging

Use the original ALLPOWERS standard AC charging cable. Connect directly to a wall power socket, avoiding extension cords if possible. Ensure your household wiring can support 10A (220V-240V) / 15A (100V-120V). If not, use a suitable power source.

AC Charging Cable: (100~120)V~15A Max, (220~240)V~7A Max (Fast charge)

3.4 Solar Charging

Connect solar panels in series as shown. Ensure the solar panel's output voltage is within 150V, maximum current is 13A, and maximum charging power is within 1000W.

ALLPOWERS Solar Panel XT60 1000W 12-150V

3.5 UPS Function (Uninterruptible Power Supply)

This product supports UPS functionality. Connect the power grid to the AC input port. When the power grid fails, the product automatically switches to battery power within 15ms. For UPS use, it's recommended to connect only one device at a time to avoid overload. Note:

• The UPS function icon lights up when AC charging and AC output are active.
• For UPS to function correctly, the AC output power should not exceed 1500W for 100~120V mains voltage or 2000W for 220~240V mains voltage. Exceeding this limit may cause the power station to supply power simultaneously with the mains until its battery reaches 5% and AC output turns off.

Diagram showing normal power flow (grid to device) and UPS mode (battery to device during power outage).

3.6 APP Operation Guide

3.6.1 APP Download

Scan the QR code below using your mobile phone to download and install the APP.

QR Code for iOS and Android.

3.6.2 Bluetooth Connection

Ensure Bluetooth is enabled on both the power station and your mobile phone. Refer to FAQ Q10 for Bluetooth activation. Open the mobile APP, click the Bluetooth icon, and follow the prompts to scan and connect to the power station. A successful connection will display 'AP S2000PRO V2.0'.

3.6.3 Mobile APP Operation Instructions

The mobile APP allows you to:

• Display output remaining time
• Display remaining battery capacity
• Display input power
• Display output power
• Control AC switch
• Control DC switch
• Access frequency switching options

4. FAQ

• Q1. What type of battery does the product use?
  This product uses high-quality Ternary lithium battery.
• Q2. What devices can S2000PRO power?
  The AC output port has a rated power of 2400W (peak 4000W). It can power most household appliances. Ensure the total power of connected devices is less than the rated power.
• Q3. How to know how long the product can supply power?
  The LCD screen displays the battery life, which can be used to estimate runtime for devices with stable power consumption.
• Q4. How to judge the product is charging?
  The LCD screen shows the remaining charging time, and the battery indicator circle has a breathing animation effect.
• Q5. How to clean the product?
  Wipe with a dry, soft, clean cloth or paper towel.
• Q6. How to store the product?
  Turn off the product and store it in a dry, ventilated place at room temperature. Avoid storing near water. For long-term storage, discharge to 30% and recharge to 60% every three months to prolong battery life.
• Q7. Can this product be brought on the plane?
  No.
• Q8. Can the S2000PRO be charged while using?
  Yes, the product supports simultaneous charging and discharging.
• Q9. Is the actual output capacity consistent with the target capacity?
  The manual states the rated capacity. Actual output capacity is lower due to efficiency losses during charging and discharging.
• Q10. How to turn on/off the Bluetooth of the power station?
  Bluetooth is off by default. Turn it on/off by pressing and holding the "DC OUTPUT" button for 3 seconds after turning on the device. The Bluetooth icon on the display will change accordingly.
• Q11. How to turn on/off the beep of the button?
  The button beep is on by default. Turn it on/off by pressing and holding the "AC OUTPUT+DC OUTPUT" button for 3 seconds after turning on the device until a prompt sound is heard.

5. Troubleshooting

Fault codes displayed on the screen indicate specific issues:

• E102: Charging low temperature protection. Automatic recovery when ambient temperature is suitable.
• E103: Charging high temperature protection. Stop charging, check vents for ventilation. Automatic recovery when temperature drops.
• E104: Discharge low temperature protection. Automatic recovery when ambient temperature is suitable.
• E105: Discharge high temperature protection. Shut down, let stand for over 2 hours. Automatic recovery when temperature drops.
• E107: Total output (AC+DC) discharge overload. Remove part of the load and manually turn on AC again.
• E210: AC discharge overcurrent. Remove the load and manually turn on AC again.
• E211: AC discharge overload. Remove the load, manually turn on AC again. Do not use for devices exceeding rated output power.
• E212: AC discharge short circuit. Remove the load, repair the load circuit, and manually turn on AC.
• E301: MPPT input overvoltage. Remove the solar panel. Do not use solar panels exceeding the rated voltage range.
• Other faults: Consult customer service for details.

6. Package Contents

• ALLPOWERS S2000PRO Portable Power Station
• AC Charging Cable
• User Manual and Warranty Card

7. Statement

Please read the user manual carefully before using this product to ensure correct operation. Improper use may cause injury or damage. By using this product, you agree to all terms and conditions. ALLPOWERS is not responsible for losses due to non-compliance with the user manual. The company reserves the right to interpret this document. Visit the ALLPOWERS official website for the latest product information.

This product is not intended for high-reliability applications like aerospace, medical, or nuclear control equipment. ALLPOWERS is not liable for any issues arising from such use.

8. Contact us

For questions or assistance, please email support@allpowers.com.

Official website: www.allpowers.com