IDW23 Smart Watch
Operation Manual
Thanks for purchasing this product. Please read this Manual carefully before use.
Scan the QR code for more function information
Specifications
| Model | IDW23 |
|---|---|
| Battery capacity | 3.8V/300mAh |
| Charging Time | 2.5 hours |
| Waterproof level | IP68 |
| Operating Temperature | -20°C~50°C |
| Product Frequency | 2402-2480MHz |
| Screen Type | 1.38"-inch color screen |
| Charging Voltage | 5V ± 0.2V |
| Battery Life | 7 Day |
| Weight of Product | 50.1g |
| Bluetooth Version | BLE5.3 |
| Max. transmission Power | 2.07dBm |
Product Overview
The IDW23 Smart Watch is designed with features such as IP68 water resistance, ultra-long battery life, full-screen touch control, and low latency. It supports 100 workout modes and multiple cloud watch faces. The watch can monitor heart rate and stress throughout the day, detect blood oxygen levels, and track sleep patterns.
Device Components:
- Physical Button: A button located on the side of the watch for navigation and power functions.
- Heart Rate Sensor: Located on the back of the watch to measure heart rate.
- Microphone: A small opening for audio input.
- Pressure Relief Hole: A small aperture, potentially for waterproofing or sound.
- Speaker: A grille for audio output.
- Magnetic Charging Contacts: Two metal points on the back for connecting the charger.
- Screen: The main display area of the watch.
Getting Started
Turning On/Off
Turning On: If the watch is off, it automatically turns on when you connect it to charge. You can also long-press the physical button to turn it on.
Note: Charge the watch to activate it before first use. Always use the original power adapter for charging.
Turning Off: To turn off the watch, navigate to Settings -> Turning off menu.
Physical Button Operation
- Short Press: Returns to the previous screen or wakes the screen when it is off.
- Long Press: Turns on the watch. If the watch is already on, a long press for 8 seconds will restart the device.
Encoder Crown
Rotate the encoder crown up and down to navigate through the watch interface.
Screen Operation
Interact with the watch using touch gestures:
- Swipe Up/Down: Toggle through menus or view long text/details.
- Swipe Left/Right: Toggle through menus.
- Tap Screen: Enter a menu or operate according to on-screen prompts.
- Tap and Hold Screen: Switch between different watch faces.
App Download and Pairing
1. App Download: Download and install the "VeryFit" app from the App Store, Google Play, or by scanning the provided QR code.
2. Pairing:
- Open the VeryFit app.
- Activate Bluetooth connection on your smartphone.
- Search for the device to pair within the app (or scan the QR code on the device).
- Complete the binding process on the app or the device.
Features
The IDW23 Smart Watch offers a range of advanced features:
- IP68 Water Resistance: Suitable for swimming pools, showers (cold water), and shallow water. Not suitable for diving, sea swimming, or saunas.
- Ultra-long Battery Life: Up to 7 days of use on a single charge.
- Full-screen Touch Control: Intuitive interaction with the display.
- Low Latency: Responsive performance.
- 100 Workout Modes: Track a wide variety of physical activities.
- Multiple Cloud Watch Faces: Customize the watch's appearance.
- Health Monitoring: Supports heart rate monitoring, stress detection, blood oxygen detection, and sleep monitoring.
For detailed operating instructions and FAQs on these features, please refer to the "User Guide" section within the VeryFit app.
Care and Maintenance
Follow these three suggestions for optimal use and maintenance:
- Keep the product clean.
- Keep the product dry.
- Do not wear the product too tightly on your wrist.
Cleaning:
- Do not use household cleansers. Use soap-free cleansers instead.
- For stubborn stains, it is recommended to clean with alcohol.
Safety Instructions
General Safety:
- Do not place the product and its accessories in extreme temperatures, as this may cause hazards such as product failure, fire, or explosion.
- Protect the product from strong impacts or jolts to prevent damage and product failures.
- Do not disassemble or modify the product or its accessories yourself. Contact customer service for after-sales support if the product fails.
Battery Safety:
- Risk of explosion if the battery is replaced by an incorrect type.
- Do not dispose of the battery in fire or a hot oven, or mechanically crush or cut it, as this can result in an explosion.
- Avoid leaving the battery in extremely high temperature environments, which can lead to explosion or leakage of flammable liquid or gas.
- Avoid exposing the battery to extremely low air pressure, which may result in an explosion or leakage of flammable liquid or gas.
Wear and Care
Some users may experience skin irritation when wearing the smart watch. To minimize the potential for irritation:
- Keep the device clean and dry.
- Ensure the watch is not worn too tightly; maintain a gap of about one finger's width.
- Periodically remove the device to allow your wrist to relax.
- After exercise, clean and dry both your wrists and the watch before wearing again, as residual sweat can corrode the watch.
- It is recommended to regularly clean the watch with soap or hand sanitizer.
- If skin allergy occurs, remove the watch and seek medical advice promptly.
Regulatory Information
FCC Compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure: The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.
EU ROHS Compliance: The device meets the EU ROHS criterion. Please refer to IEC 62321, EU ROHS Directive 2011/65/EU and revised directive.
Canada Compliance: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Waste Disposal: Old electrical appliances must not be disposed of with residual waste but must be disposed of separately at communal collecting points. This helps recycle valuable raw materials and treat toxic substances.
Charging Cable Safety: Do not attach the magnetic part of the charging cable to other metals to avoid short-circuiting the contacts.
Responsible Party
Company name: Cleveland International Trade Agency
Address: 4033 ST Clair Ave, Cleveland, OH 44103, USA
Tel: 216-600-0606
E-mail: Georgewu7012@gmail.com
