Bissell QuickWash™

Parts Identification

The following diagram illustrates the various parts of the Bissell QuickWash™ carpet cleaner, models 1970E, F, G, and J. Each part is identified by a corresponding number.

• 1: Handle Assembly
• 2: Hose and Wand Assembly
• 3: Housing Unit
• 4: Top Housing
• 5: Power Switch/Cord Assembly
• 6: Accessory Holder
• 7: Fasteners/Screws
• 8: Wheels
• 9: Lower Housing Assembly
• 10: Front Cover
• 11: Filter
• 12: Front Nozzle
• 13: Rear Housing
• 14: Side Cover
• 15: Motor Housing Component
• 16: Motor Housing Component
• 17: Motor Assembly
• 18: Fasteners/Screws
• 19: Switch Assembly
• 22: Electrical Components Housing
• 23: Fasteners/Clips
• 24: Internal Component Tray
• 25: Internal Component Tray
• 26: Internal Component Tray
• 27: Internal Component Tray
• 30: Brush Roll Assembly
• 32: Power Cord
• 33: Power Cord

Contact Information:

• BISSELL Homecare, Inc. (U.S.)
• BISSELL Homecare (Overseas) Inc. (U.K.)
• BISSELL Middle East & Africa (U.A.E)
• BISSELL AUSTRALIA PTY LIMITED (Australia)
• Parex Appliances (New Zealand)

Issued: June 2006

Revised: October 2007

© 2007 BISSELL Homecare Inc.