Dell S2725QS Outline Dimension
General Specifications
Unit: mm [inch]
Dimension: Nominal
Drawing: Not to scale
Top View with Swivel
Illustrates the monitor's top view with swivel functionality. The swivel range is indicated as 30° in both directions.
Dimensions shown:
- Height: 60.00 [2.36]
- Width: 596.74 [23.49] to 611.54 [24.08]
- Base dimensions: 37.00 [1.46] x 248.00 [9.76]
Side View with Lift and Tilt
Depicts the monitor from the side, showing its lift and tilt capabilities. The monitor can be lifted up to 130.00 [5.12] mm [inch]. The tilt range is shown as 5° and 21°.
Dimensions shown:
- Overall Height (max lift): 411.80 [16.21]
- Depth (at base): 200.40 [7.89]
- Height from base to monitor bottom (min lift): 162.65 [6.40]
- Height from base to monitor bottom (max lift): 343.50 [13.52]
- Monitor depth (front to back): 58.54 [2.30]
Front View with Pivot
Shows the monitor from the front, illustrating its pivot functionality. The pivot range is 90° in both directions.
Dimensions shown:
- Height: 335.66 [13.22] to 355.98 [14.02]
- Width: 596.74 [23.49] to 611.54 [24.08]
- Pivot range: 90°
- Distance from stand center to monitor edge: 175.13 [6.90]
Rear View with VESA Mount Information
Presents the rear view of the monitor, highlighting the VESA mounting points and dimensions. The monitor supports VESA mounting with 4x (M4x10) screws.
Dimensions shown:
- VESA mounting pattern width: 100.00 [3.94]
- VESA mounting pattern height: 100.00 [3.94]
- Depth from mounting surface to monitor rear (Z dimension): 44.68 [1.76]
- Monitor width: 596.74 [23.49]
- Monitor height: 335.66 [13.22]
- Monitor depth (max): 200.40 [7.89]
Additional Dimension Details
Provides specific measurements for various parts of the monitor stand and panel.
- Bezel thickness (top/side): 7.40 [0.29]
- Bezel thickness (bottom): 10.62 [0.42]
- Screen diagonal: 685.80 [27.00] (implied by monitor size)
- Lift range: 130.00 [5.12]
- Tilt range: 5° to 21°
- Pivot range: 90°
- Swivel range: 30°
- VESA mount dimensions: 100 x 100 mm
- Screw size for VESA mount: M4x10
