This document provides essential dimension and installation guidance for Westinghouse 60cm electric cooktops, specifically models WHC633BE and WHC643BE. It outlines critical measurements and clearances required for proper integration into kitchen cabinetry.
Installation Clearances
Ensure adequate vertical clearance above the cooktop, with a minimum of 500mm recommended for rangehood compatibility. A minimum of 50mm clearance is also noted for the cooktop installation itself.
NOTE: The clearance must meet or exceed the minimum recommended for both the rangehood and cooktop. Refer to the rangehood installation manual for specific requirements.
Product and Cut-Out Dimensions
| Product WxDxH (mm) | Cut-out WxD (mm) |
|---|---|
| 590 x 520 x 51 | 560 x 490 |
IMPORTANT: These dimensions are a guide only. All measurements are in millimetres (mm). For complete installation instructions, refer to the manual provided with the product.
Safety Warning
WARNING: Surface temperatures of the base can exceed 95°C. Under bench access must be restricted by the use of a non-combustible barrier during installation.
