R. STAHL Cable Gland CMP-25A2FRC
Article No. 243628
Product Description
The CMP-25A2FRC cable glands from the A2FFC series are designed for all types of unarmored and armored cables with metallic braiding for installation in flexible or rigid conduits with rubberized or coated sheathing. Installation is simplified by a rotating connector. These cable glands are engineered to prevent cold flow.
Key features include:
- Connection for Ex-d and Ex-e cables for unarmored cables and cables with metallic braiding in rigid conduits.
- Outer cable sheath insulation via a sliding seal protected against explosion.
- International authorization according to IECEx, ATEX, and CSA.
Technical Data
Explosion Protection
| Specification | Details |
|---|---|
| Ex Model | Ex eb & Ex db & Ex nR & Ex ta |
| Applications (Zones) | 1, 2, 20, 21, 22 |
| IECEX Gas Approval | IECEx CML 18.0179X |
| IECEx Gas Explosion Protection | Ex db eb IIC Gb |
| IECEx Dust Approval | IECEx CML 18.0179X |
| IECEx Dust Explosion Protection | Ex ta IIIC Da |
| IECEx Grisú Approval | IECEx CML 18.0179X |
| IECEx Safety of Vapors Approval | IECEx CML 18.0179X |
| IECEx Vapor Resistant | Ex nR IIC Gc |
| ATEX Gas Approval | CML18ATEX1321X |
| ATEX Gas 2 Approval | CML18ATEX4313X |
| ATEX Gas Explosion Protection | II 2 G Ex db eb IIC Gb |
| ATEX Dust Approval | CML18ATEX1321X |
| ATEX Dust Explosion Protection | II 1 D Ex ta IIIC Da |
| ATEX Grisú Approval | CML18ATEX1321X |
| ATEX Vapor Resistant Certificate | CML18ATEX1321X |
| ATEX Vapor Resistant | II 3 G Ex nR IIC Gc |
Note: Product descriptions and certificates can be downloaded from the manufacturer's website (www.cmp-products.com).
Mechanical Data
| Specification | Details |
|---|---|
| Model | 25 |
| Clamping Ring | No |
| Degree of Protection (IP) | IP66 |
| Degree of Protection Note | Mounting according to CMP manufacturer's instructions |
| Degree of Protection IP (IEC 60079) | IP66 |
| Type of Protection (IP) UL | IP66 |
| Seal Material | SOLO LSF |
| Silicone-Free | Yes |
| Halogen-Free | Yes |
| Clamping Zone | 11.1 – 20 mm |
| Armor Type 2 | Braided safety cable |
| Clamping Zone | 11.1 ... 20 mm |
| Construction Type | BS 6121, IEC/EN 62444 |
| Dimension Across Flats | 39.6 mm |
| Wrench Width | 36 mm |
| Thread Size | M25 |
| Thread Length | 15 mm |
| Thread Pitch | 1.5 |
| Thread Standards | Metric |
| Thread Connection Size | 25 |
| Internal Sheathing | 11.1 ... 20 mm |
| Internal Conduit Thread | M25 |
| Protrusion Length | 56.1 mm |
| Impact Resistance (IEC 60079) | 7 J |
| Impact Resistance | 20 J |
| PVC Cap | PVC09 |
| Weight | 200 g |
| Weight | 0.44 lb |
Measurement Diagram: (All dimensions in mm) – Dimensions are subject to change.
The diagram shows:
- A = Internal Sheathing
- C = Thread Size
- D = Dimension Across Flats
- D = Wrench Width
- E = Thread Length
- F = Protrusion Length
- G = Internal Conduit Thread
R. STAHL reserves the right to modify technical data, dimensions, weights, constructions, and delivery options.
