Televes NevoSwitch 5 Inputs - 24 Outputs
Product Overview
The Televes NevoSwitch is a high-quality, cascadeable multiswitch designed for efficient signal distribution. It features 5 inputs, comprising 1 terrestrial input and 4 satellite (SAT) inputs, providing 24 user outputs. Additionally, it includes 5 loop-through outputs and a 12dB adjustable level control for each user output.
Its flexibility allows it to be used as a single unit or in a cascade configuration, thanks to switchable termination resistors. This makes it adaptable to various installation requirements.
Key Features & Highlights
- Compact Design: Very compact unit for easy installation.
- Robust Construction: Features a cast aluminum housing, developed and manufactured by Televes.
- Adjustable Output Levels: Includes a 12dB level adjuster per user to fine-tune output signal strength.
- Terrestrial Amplifier Switch: Switch for powering terrestrial amplifiers.
- Receiver Power Supply: Supports power supply directly from the receiver.
- V-Low Input Feed: Allows for remote powering via the V-Low input.
- DC Pass-Through: Enables DC pass-through between inputs and cascade outputs.
- Terrestrial Active: Supports active terrestrial signal input.
- ECO Mode: Features an ECO mode for user-dependent power consumption.
- Cascade/Single Switch: Switchable between cascade and single switch modes (termination resistors can be switched on/off).
- 12V Power Supply: Operates with a 12V power supply.
- Low Power Consumption: Economical operation due to low power consumption, potentially receiver-powered.
- Color-Marked Inputs/Outputs: Inputs and loop-through outputs are color-coded for easy identification.
- European Quality: European quality and design, manufactured and tested 100% by Televes.
Technical Specifications
| Specification | Value |
|---|---|
| Number of Inputs | 5 |
| Number of Cascade Outputs | 5 |
| Number of User Outputs | 24 |
| Frequency Range TERR. | 47 - 862 MHz |
| Frequency Range SAT. | 950 - 2400 MHz |
| Input Level TERR. | 92 dBμV |
| Input Level SAT. | 105 dBμV |
| Through Loss TERR. | 6 dB |
| Through Loss SAT. | 4.5 - 12 dB |
| User Attenuation 1-8 TERR. | 2 dB |
| User Attenuation 1-8 SAT. | 1 dB |
| User Attenuation 9-16 TERR. | 4 dB |
| User Attenuation 9-16 SAT. | 2 dB |
| User Attenuation 17-24 TERR. | 6 dB |
| User Attenuation 17-24 SAT. | 5 dB |
| Level Adjuster per User | 0 - 12 dB |
| Isolation H/V | > 30 dB |
| Isolation TN | > 25 dB |
| Power Supply | 12 Vdc |
| Max. Current Consumption (PSU) | 175 mA |
| Max. Current Consumption (STB) | 35 mA |
| Operating Temperature | -5 to 45 °C |
| Protection Index | IP20 |
Packaging Information
| Item | Quantity |
|---|---|
| Carton | 1 pc. |
Physical Data
| Dimension | Value |
|---|---|
| Net Weight | 1.201,00 g |
| Gross Weight | 1.201,00 g |
| Width | 137,00 mm |
| Height | 386,00 mm |
| Depth | 29,00 mm |
| Component Weight | 1.189,00 g |
Application Example
The document includes diagrams illustrating the application of the NevoSwitch in various configurations, showing connections from satellite LNBs and terrestrial antennas through multiple NevoSwitch units, amplifiers, and DC blockers to satellite set-top boxes (STBs). One diagram highlights that in certain configurations, at least one active STB is required to power the LNB.
