Police Radar, Laser, Lidar and Camera Equipment Tech Company
User Manual for KUSTOM models including: Falcon HR K-Band Handheld RADAR, HR K-Band Handheld RADAR, Handheld RADAR
Falcon HR Police Handheld Radar Gun for Speed Enforcement
File Info : application/pdf, 2 Pages, 701.17KB
DocumentDocument6 Falcon HR Operating Modes The Falcon HR is capable of operating in the following modes: Stationary ALL Stationary Approaching Only Stationary Receding Only Operation while the patrol vehicle is parked. Capable of capturing speed data from vehicles that are approaching and receding. Operation while the patrol vehicle is parked. Capable of capturing speed data from vehicles that are approaching only. Operation while the patrol vehicle is parked. Capable of capturing speed data from vehicles that are receding only. 7 Accuracy Tests Automatic Self-Test Manual Self-Test Falcon HR performs an internal accuracy test every five (5) minutes. Press the Test button to run internal accuracy tests. (800) 458-7866 (913) 492-1400 www.kustomsignals.com KSI Part # 006-1075-01 Rev. 2 Ontario Falcon HR Quick Start Guide 1 Get To Know The Falcon HR Display Control buttons Transmitter/ Receiver Handle Display Graphic Test/Batt/Hold indicator Target speed Fast/Lock label Fastest/locked speed Infrared remote detector Handle/pod latch Strongest target Approaching vehicle indicator Receding vehicle indicator Mode label Fastest direction indicator www.kustomsignals.com (800) 458-7866 (913) 492-1400 2 Falcon HR Rear Panel Control Button Locations Test button Mode button Range sensitivity/up button Power button Audio /down button 3 Falcon HR Control Button Function Button Function Used to turn the Falcon HR on and off. Used to place the Falcon HR in the Range Set "rnG" mode. A secondary function is the incremental up control for audio and range. Used to place the Falcon HR in the Audio Set mode. A secondary function is the incremental down control for audio and range. Used to navigate through the operational mode loop. The available selections are Stationary "ALL" mode, Stationary Approaching only "APr", and Stationary Receding only "rEc". Initiates the internal self-test to test the internal accuracy and illumination of all display indicators. Pressing and releasing the Test button followed by pressing and releasing the Mode button will toggle on and off the + backlight. Pressing and releasing the Aud button followed by pressing and releasing the Mode button will toggle on and off the audio + Doppler squelch. 4 Optional Features Automatic unlocking of locked speeds Track through lock (trigger operation) The Falcon HR defaults to not automatically unlocking speeds the officer has locked. If automatic unlocking is required, add 1 to the Options total. The Falcon HR defaults to transmitting for 5 seconds after the trigger is released when locking a target. This allows the target to be tracked after lock during this time. If preferred, the transmitter can be shut off immediately upon trigger release. To select that option, add 2 to the Options total.