UURIG PH-10 Phone Camera Handle Grip w Light

Product Description

The UURIG PH-10 is a versatile handle grip designed for smartphones, enhancing photography and videography capabilities. It features a built-in adjustable fill light and a detachable wireless Bluetooth remote.

Key Components:

1. Focus reduction button
2. Focus button
3. Shooting button
4. Type-C remote control charging port
5. Remote control indicator light
6. Fill light switch/gear button
7. Cold shoe mount
8. Phone holder
9. Fill light
10. 1/4 screw hole
11. Fill light charging port

The phone holder is adjustable to accommodate phones with widths ranging from 60mm to 82mm (2.36 to 3.22 inches).

Bluetooth Pairing

This section details how to connect the UURIG PH-10's remote control to your smartphone via Bluetooth.

Steps:

1. Power On/Off Remote: Press and hold the shooting button for 3 seconds to turn on the remote control. The green indicator light will flash. Press and hold for 3 seconds again to power off.
2. Enable Bluetooth: On your mobile phone, turn on Bluetooth and enter the search state.
3. Pair Device: In the list of available Bluetooth devices, select "UURIG". A pairing prompt for "UURIG" will appear; click to confirm pairing. The green indicator light on the remote will remain steadily lit upon successful connection.
4. Control Functions: Click the shooting button to take pictures. When the camera app is in video mode, click the button to start recording and click again to stop recording.
5. Charging Indicator: During charging, the red indicator light flashes. Once fully charged, the red light will stay on for 1-3 minutes before automatically turning off. If the battery level drops below 15%, the red light will flash until the device powers off. The device features auto-shutdown after 30 minutes of inactivity or 3 minutes without a Bluetooth connection to conserve power.
6. Compatibility Note: Focus control functionality may vary with Android phones; it is designed for compatibility with most mainstream Android devices. For iOS devices, the remote can control photo and video recording functions only.

Fill Light Operation

Instructions for operating the integrated fill light.

Operation:

1. Power On/Off & Brightness: Long press the power button for 3 seconds to turn on the fill light. The default brightness is 30%. Short press the power button to cycle through brightness levels: 30%, 70%, and 100%. Long press for 3 seconds to turn off the light.
2. Normal Operation Indicator: The indicator light is green during normal working conditions.
3. Charging Status: While charging, the red indicator light flashes. When fully charged, the red indicator light stops flashing, and the green light illuminates.
4. Charging Flash: The red indicator flashes during the charging process.
5. Low Battery Warning: When the battery level is below 30%, the green indicator light flashes. If the battery level falls below 15% (insufficient to maintain optimal brightness), the red light flashes, and the device will shut down.

Phone Installation

Guidance on mounting your phone and using the Bluetooth remote.

Tips for Use:

1. The product is equipped with a built-in lithium battery and does not require battery replacement.
2. When the remote control's battery is low, the red indicator light flashes, indicating it needs to be charged promptly.
3. It is recommended to use a 5V/0.5A adapter charger. The red light will turn off upon completion of charging.
4. For prolonged periods of non-use, it is advisable to charge the battery approximately every 2 months to ensure the product's continued proper function.