Integrated Dishwasher Installation Guide

General Information and Parts List

The installation requires various parts, including screws (Torx T20), brackets, and other fasteners. Ensure you have all necessary components before starting. Some parts are model-specific.

Note: The following parts are not supplied with all dishwashers and may not be intended for your specific model.

Supported Models and Language Variations:

• EN: Only certain models.
• AR: في موديلات معينة.
• BG: Само определени модели.
• CN: 仅限部分型号。
• DA: Kun visse modeller.
• DE: Nur bei bestimmten Modellen.
• ES: Sólo se aplica a determinados modelos.
• ET: Ainult teatud mudelitel.
• FA: فقط بعضی از مدل ها.
• FI: Vain tietyt mallit.
• FR: Uniquement pour certains modèles.
• HR: Samo na nekim modelima.
• HU: Csak bizonyos modellek esetében.
• IT: Solo per alcuni modelli.
• KK: Тек белгілі бір модельдер.
• LT: Tik tam tikri modeliai.
• LV: Vienīgi noteiktiem modeļiem.
• MK: Само кај одредени модели.
• NL: Alleen bepaalde modellen.
• NO: Bare enkelte modeller.
• PL: Dotyczy tylko wybranych modeli.
• RO: Numai la anumite modele.
• RU: Только в некоторых моделях.
• SK: Iba niektoré modely.
• SL: Samo nekateri modeli.
• SQ: Vetëm disa modele të caktuara.
• SR: Samo neki modeli.
• SV: Endast vissa modeller.
• UK: Тільки в деяких моделях.

Step-by-Step Installation

Step 1: Prepare the installation area. Ensure adequate space and proper alignment.

Step 2: Remove any protective packaging or transport locks.

Step 3: Attach the mounting brackets to the furniture.

Step 4: Secure the dishwasher to the furniture using the provided screws.

Step 5: Connect the water supply and drainage hoses. Ensure secure connections to prevent leaks.

Step 6: Adjust the leveling feet to ensure the dishwasher is stable and level. Dimensions for L and XXL models are provided (e.g., L: 640-720mm height, XXL: 700-800mm height).

Step 7: Install the decorative door panel. Ensure it is properly aligned and secured.

Step 8: Connect the electrical supply. Follow safety guidelines.

Step 9: Attach the dishwasher to the countertop or adjacent cabinets.

Step 10: Connect the water inlet hose and drain hose. Ensure the water pressure is within the specified range (0.03-1.0 MPa).

Step 11: Install the door hinge mechanism. Ensure smooth operation.

Step 12: Test the dishwasher's functionality. Check for leaks and proper operation of all cycles. The 'Auto open' feature may be enabled.

Step 13: Final checks and adjustments. Ensure all panels are fitted correctly.

Technical Specifications and Safety

• Screw Type: Torx T20
• Torque: Max 0.6 Nm
• Hose Connections: Ensure secure fittings.
• Water Pressure: 0.03-1.0 MPa
• Maximum Hose Length: max 4.5 m
• Minimum Installation Depth: min. 555 mm
• Minimum Installation Width: 600 mm
• Minimum Installation Height: 640-720 mm (L), 700-800 mm (XXL)
• Door Panel Weight Capacity: L: 3-10 kg, XXL: 3-9 kg

Safety Precautions: Always follow electrical safety guidelines. Ensure water connections are leak-free. Refer to the manual for specific safety warnings.