User Manual for DUNNO models including: P1P2, 2-in-1 Wireless Charging Pencil Box Battery, P1P2 2-in-1 Wireless Charging Pencil Box Battery, Wireless Charging Pencil Box Battery, Pencil Box Battery, Battery
DUNNO 2 In 1 Wireless Charging Pencil Box Battery P1P2 User Guide — Best User Manuals
71mm 47mm 2-in-1 Wireless Charging Pencil-Box Battery User Manual Product Introduction Charging your Apple Pencil 1 and Apple Pencil 2 at the same time with our 2-in-1 Wireless Charging Pencil-Box Battery. It is also a storage box when used alone. Product Appearance Storaging Lightning Adapter When the product is 100% loading with work Apple Pencil 1 Cap of Apple Pencil 1 Apple Pencil 2 Rotate Type-C Input Charging for Apple Pencil 1 Storaging Apple Pencil Tip Led Wireless Charging Area Power Led Button for Apple Pencil 2 Led Type-C cable Apple Pencil Tip Lightning Adapter Applicable Devices For Apple Pencil 1 Apple Pencil 2 Product Specification Rated Capacity:570mAh/3.85Vdc/2.194Wh Input: DC5V 1A Output1(Apple Pencil 1): DC5V 0.2A Output2(Apple Pencil 2): 1.5W Standard Accessories 2-in-1 Wireless Charging Pencil-Box Type-C cable User manual FCC STATEMENT This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC's RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied anteCorelDRAW iLovePDF