38667-MI Impulse Counter

Overview

This is a 6-digit, Red LED Impulse Counter featuring a manual front panel reset. It is designed for applications requiring precise counting with a 12-24VAC/DC power supply.

Key Specifications

• Supply Voltage: 12-24V AC/DC
• Power: <3VA Max
• Display: 0.38-inch Height Red LED
• Input Signal: Normally Open Contact, NPN 3-wire Sensor
• Maximum Counting Speed: 10 counts per second (cps)
• Sensor Power Output: +12VDC (Vcc)
• Power Off Memory: Approximately 10 Years
• Counting Error: Less than 1 count
• Reset Time: Less than 0.5 seconds
• Power On Settling Time: Less than 1 second
• Dielectric Strength: 2000VAC at 50/60Hz for 1 minute
• Insulation Resistance: 100MΩ minimum at 500 VDC
• Working Temperature: -5°C to 45°C
• Connections: Rear Terminal strip
• Panel Cutout: 50.5 x 25.5mm
• Panel Thickness Compatibility: 5mm Minimum / 7mm Maximum
• Physical Dimensions (W x H x D): 56mm (~2-1/4") x 40mm (~1-9/16") x 82mm (~3-1/8")
• Weight: 0.16 (units not specified, likely kg or lbs)

Wiring and Sensor Information

The counter utilizes a rear terminal strip for connections:

The input signal type is NPN Transistor Output, specifically "Low On Detection". The sensor itself is NOT INCLUDED with the counter.

The power supply (12-24VAC/DC) connects to Terminals 4 and 5.

Supplier Information

MARLIN P. JONES & ASSOC., INC.
8380 Resource Rd. West Palm Beach, FL 33404
Phone: 800-652-6733
FAX: 561-844-8764
Website: WWW.MPJA.COM

Disclaimer: Information provided by MPJA inc. is a service to customers. Accuracy or usefulness is not guaranteed, nor is it an endorsement of any part, supplier, or manufacturer. Use of information and suitability for any application is at the user's own discretion and risk. Information is subject to change without notice.