Build Your Own Metal Robot Instruction Manual
Brand: anko
Features: Lights and sounds, robot can navigate around obstacles
Age Recommendation: 8+
Parts List
| Part Number | Description | Quantity |
|---|---|---|
| 1526 | Screw (2.3x6mm) | 2 |
| 1527 | Screw (2.3x8mm) | 1 |
| 1523 | Screw (2.3x12mm) | 1 |
| 1501 | Screw (6mm) | 30 |
| 1502 | Screw (8mm) | 8 |
| 1505 | Screw (12mm) | 4 |
| 1506 | Screw (18mm) | 3 |
| 1507 | Screw (22mm) | 2 |
| 1511 | Nut | 53 |
| 1202 | Metal Plate | 2 |
| 2527 | Red Screw Cap | 2 |
| 2526 | Red Screw Cap | 2 |
| 2528 | Red Screw Cap | 2 |
| 2524 | Left Arm Component | 1 |
| 2523 | Right Arm Component | 1 |
| 0001 | Metal Bracket | 1 |
| 1007B | Main Body Chassis | 4 |
| 2525 | Metal Plate | 1 |
| 2521 | Metal Plate | 1 |
| 2529 | Metal Plate | 1 |
| 2519 | Metal Plate | 1 |
| 2522 | Metal Plate | 1 |
| 40327 | Yellow Gear | 2 |
| 1401 | Green Gear (8mm x 3mm) | 15 |
| 1402 | Green Gear (8mm x 5mm) | 7 |
| 1006B | Motor Unit | 2 |
| 1005 | Battery Holder | 2 |
| 2502A | Metal Plate | 1 |
How to Play
- Press and hold for 3 seconds to power on; the robot will enter automatic cruise mode.
- Press the switch again to enter exploration mode.
- Press the switch for the third time to enter sleep mode; the machine will automatically shut down after a period of time.
- Press and hold for 3 seconds to power off.
Automatic cruise mode: The robot moves and turns itself in different directions.
Exploration mode: The robot will avoid obstacles automatically [avoid obstacles].
Assembly Instructions
Step 1: Assemble Part 1007B with Screws and Nuts
This step involves assembling the main body chassis (Part 1007B). Two main chassis components are joined together using various screws, including 8mm and 6mm screws, and nuts (Part 1511).
Step 2+1: Attach Motor and Gear Components
This step focuses on attaching the motor units (Part 1006B) and gears (Parts 1401, 1402, 40327) to the base structure. Screws such as 2.3x8mm and 2.3x6mm, along with nuts, are used for this assembly.
Step 3+2: Attach Lower Body and Wheels
This step involves connecting the lower body assembly, which includes wheels, to the main robot chassis. Screws like 2.3x6mm and 22mm, along with nuts, are utilized.
Step 4+3: Build Robot Frame and Attach Body
This step constructs the robot's main frame using metal plates (e.g., Parts 1202, 2521, 2525) and connects it to the robot's body. 12mm and 18mm screws and nuts are used in this process.
Step 5+4: Final Assembly of Head, Arms, and Electronics
This is the final assembly stage where the robot's head, articulated arms (Parts 2524 Left Arm, 2523 Right Arm), and electronic components are attached to the main body. Screws and nuts are used to secure these parts.
Important Information
IMPORTANT! PLEASE READ CAREFULLY BEFORE USE AND KEEP FOR FUTURE REFERENCE.
Drawings in the manual are for visual purposes only. Actual product may vary slightly. The manufacturer reserves the right to change any specification or feature without prior notice.
Product Information
KEYCODE: 43-232-314
MADE IN CHINA
For AU/NZ: Imported for Kmart Stores in Australia and New Zealand.
Kmart Australia: 690 Springvale Road, Mulgrave, VIC 3170, Australia
Kmart New Zealand: Regional Office, Kmart Papatoetoe Store, Hunters Plaza, Great South Road, Papatoetoe, Auckland, New Zealand
Kmart Customer Service: AU: 1800 124 125 NZ: 0800 945 995
