SYNCO | Branded Microphone Manufacturer
User Manual for SYNCO models including: Mic-D30 Microphone
Furry Windscreen *1 Shock Mount *1 User Manual *1 Packing Box *1 Feature Introduction Package List Package includes the following items Caring For Your SYNCO Mic-D30 Microphone Super cardioid capsule for excellent of-axis sound rejection 75Hz/ 150Hz low cut ilter Overdrive Protection Stepless gain adjustment dial Support real-time audio monitoring
Synco Audio - Shotgun Microfoon - Ontkoppelbaar van Shockproof Mount - Mic-D30 | bol.com
File Info : application/pdf, 6 Pages, 997.44KB
DocumentDocumentMic-D30 Microphone User Manual Guangzhou Zhiying Technology Co., Ltd Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000 support@syncoaudio.com www.syncoaudio.com https://www.facebook.com/syncomicrophones Thank you for choosing SYNCO Mic-D30 Please read this manual carefully before use and follow all instructions mentioned herein. Feature Introduction.........................................................................01 Caring For Your SYNCO Mic-D30 Microphone..........................01 Package List......................................................................................02 Components Introduction................................................................03 Operations.........................................................................................03 The Use of Furry Windscreen Charging the Mic-D30 Microphone Using with Your Device Real-time Audio Monitoring Low Cut Button Specifications....................................................................................05 Feature Introduction Super cardioid capsule for excellent off-axis sound rejection 75Hz/ 150Hz low cut filter Overdrive Protection Stepless gain adjustment dial Support real-time audio monitoring Type-C to 3.5mm TRS/ TRRS output Dual shock mount to firmly hold the mic Caring For Your SYNCO Mic-D30 Microphone Please keep the product in a dry, clean, dust-free environment. Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage. Use only a soft and dry cloth for cleaning the product. Malfunction may be caused by dropping, impact of external force. Do not attempt to disassemble the product. Doing so voids warranty. Please have the product checked or repaired by authorized technicians if any malfunctions happened. Failure to follow all the instructions may result in mechanics damage. Warranty does not apply to human errors. 1 Package List Package includes the following items SYNCO Mic-D30 Microphone *1 Packing Box *1 Furry Windscreen *1 Shock Mount *1 User Manual *1 Type-C to USB Charging Cable *1 Type-C to 3.5mm TRRS Phone Cable *1 Type-C to 3.5mm TRS Camera Cable *1 2 Components Introduction 75Hz Low Cut Indicator 150Hz Low Cut Indicator Low Cut Button Overdrive Protection Indicator ON-OFF & Battery Indicator ON-OFF/ Overdrive Protection Type-C Charging & Output Port Headphone Output Gain Adjustment Dial Operations 1. The Use of Furry Windscreen Mic-D30 comes with a furry windscreen to eliminate the noise caused by wind while recording. Please install the windscreen to the microphone as shown below. 3 2. Charging the Mic-D30 Microphone The Mic-D30 has a built-in battery. Please fully charge the microphone with the Type-C Charging Port and Type-C to USB Charging Cable before use. (Note: The ON-OFF & Battery Indicator will fast flash when the mic is running out of power. When the mic is charging, the indicator will flash slowly then stay green when it is fully charged.) Type-C Charging Port ON-OFF & Battery Indicator 3. Using with Your Device The package includes a shock mount, which has a cold shoe on the bottom. It helps to mount the microphone on recording devices like DSLR, camera, camcorder. Securely place the microphone into the shock mount. Install the shock mount to your recording devices via the cold shoe and tighten the screw. Connect the microphone with your device via the Type-C to 3.5mm Cable. (Note: Some smart phone devices may require a adapter like Lightning to connect with the microphone. Adapter is not included in the package.) Long press the ON-OFF button to turn on the microphone. (Note: Short press for Overdrive Protection function.) 4. Real-time Audio Monitoring It is suggested to use the headphone whose impedance under 55 Ohm to monitor the audio. Plug your headphone into the Headphone Output, then you can realtime monitor your recording. 4 5. Low Cut Button First press for 75Hz low cut, second press for 150Hz low cut and the third press to turn off the low cut function. Specifications 1. Polar Pattern: Super Cardioid 2. Performance Parameter Transducer Polar Pattern Frequency Response Dynamic Range (Typical) Signal/Noise Sensitivity Maximum SPL Output Impedance Low Frequency Roll-off Output Interface Dimensions Weight Back Electret Condenser Super Cardioid 20 Hz to 20 KHz 119dB SPL (A-weight per IEC651) 82dB1KHz at 1Pa(A-weight per IEC651) -24dB±2dB 1dB=1V/Pa at 1kHz 124 dB SPL 300±20%at 1kHz 75Hz/150Hz Type-C to 3.5mm 21.5×214.5mm 85g 5 6 7 8