Drilling Template for Narrow Door Hardware (DE/AT/FR)
Precise guide for installing door hardware with detailed measurements for different regions.
Germany (DIN Standard)
This section details the drilling template specifications for installation in Germany, conforming to DIN standards.
The template is a long, narrow guide featuring a ruler-like scale along its edges and markings for precise hole placement. It indicates positions for drilling holes and a central recess.
Key Dimensions and Markings:
- Overall reference length: 125 mm
- Markings along the length: 92 mm, 75 mm, 105 mm, 72 mm, 55 mm.
Recommended drill bit diameter: 8 - 8.5 mm.
Instruction: Please check all measures after printing to ensure accuracy.
France / Austria (DIN / Ö-Norm Standards)
This section provides drilling template specifications for installation in France and Austria, adhering to both DIN and Ö-Norm standards.
The template is a long, narrow guide with a ruler-like scale and specific markings for hole positioning. It shows multiple circular hole locations and a central recess.
Key Dimensions and Markings:
- Overall reference length: 123 mm
- Markings along the length: 90 mm, 73 mm, 103 mm, 70 mm, 53 mm.
- Additional reference points: 90 mm, 70 mm, 85 mm, 88 mm.
- Specific hole positions/distances: 68 mm (relative to a reference, possibly 85 mm from another point), 71 mm (relative to a reference, possibly 88 mm from another point), 118 mm, 121 mm.
Recommended drill bit diameter: 8 - 8.5 mm.
Instruction: Please check all measures after printing. Verify the measures after printing, please!
This drilling template serves as an essential tool for accurate hardware installation. Always prioritize safety when operating drilling equipment.
