User Guide for dormakaba models including: PK3788, Lyazon Site Setup, Site Setup, Setup

Kimberly Kilman

INSTALLER - Rokka.io

14 de jun. de 2024 — with the Saffire EVO Wi-Fi Lock User Guide. https://dormakaba.rokka.io/original/3d53ba/1 · 680707144 PK519348 Saffire EVO U · G . Before going to the ...

• Google Docs
• Google Drive
• Download [pdf]



File Info : application/pdf, 2 Pages, 426.14KB

Document Document

INSTALLER

Lyazon Site Setup: Installation



Welcome
Lyazon Site Setup requires installers to caopmpmainssdiolongloicnk.s at the site according to the site map provided by the partner.

START HERE
Remember to enable Bluetooth!

First installations only
Obtain access to the dormakaba Utility App: app and log in. 1. Provide the Partner with your name, email
address, and phone number.
2. Look for an email from the partner inviting you to register for a dormakaba ID. Follow the prompts to create an ID.
3. When prompted, log in. This login links your profile with the partner environment.
4. When prompted, download the Lyazon Utility App.

Before going to the site

·apLthpoegasinnitdetolowgthheienr.eLyyaozuonarUetgiliotyinAgptpo

and verify that install locks is

listed (Step 2).

· Obtain the site plan from the partner. The plan provides the location and name of each lock.

· Verify with the partner that the wireless network meets minimum requirements.

· Obtain the network details with the partner: name (SSID), password and security mode.

· (recommended) Obtain and become familiar with the Saffire EVO Wi-Fi Lock User Guide. https://dormakaba.rokka.io/original/3d53ba/1 680707144_PK519348%20Saffire%20EVO%20U G.pdf

Best practices
·apEpnsaunred tlohgatind.oors remain open and unlocked until successfully commissioned and tested.
· (recommended) The lock should remain in Construction mode until it is commissioned. Do not program or issue commands on the lock prior to commissioning.

PK3788 1.1.0-0 05/2024

1 Open app and log in.

2 Select site.

3 Click FIND LOCK.

4 Enter *#*# on lock. 5 Select lock.

6 Click
CONFIGURE NETWORK.

7 Specify and apply

8 Select and apply

network credentials.

time zone setting.

9 Enter lock name,

10 Lock is commissioned.

click START COMMISSION. Proceed to test.

Testing locks
After commissioning locks, test each lock to ensure caopmpmaunndicloagtioinn. with Lyazon cloud. For each lock, issue the keypad command:
**1#
Pass: 1 Blue flash and 1 Green flash Fail: 1 Blue flash and 1 Red flash If the test fails, proceed to troubleshooting.
Troubleshooting
Uaspepthaendfolollogwinin. g troubleshooting flow to discover and correct the issue. For additional troubleshooting steps, refer to the Saffire EVO Wi-Fi Lock User Guide. The color blocks in the flow represent the LED flash sequence on the lock upon receiving a command.
Support
·apCopruksawtnodsmcluoesrgtsoinem.rveicrsee: r1v-i8c0e0.a-m84e9r@-8d3o2r4m(aokpatbioan.c1o)m · Technical support: 1-800-849-8324 (option 3)
or mhtechnicalsupport.us@dormakaba.com PK3788 1.1.0-0 05/2024