Sonoff SwitchMan Smart Wall Switch M5-1C/2C/3C-120W User Manual

Button Operation

• Press once: Turn on/off the device.
• Press and hold for 5 seconds: Device enters pairing mode.

Wi-Fi LED Indicator (Blue)

eWeLink Mode:

• Keeps on: Device is online.
• Flashes twice: LAN connection.
• Flashes once: Offline.
• Flashes two short and one long: Device is in pairing mode.

Matter Mode:

• Keeps on: Device is online.
• Flashes once: Offline.
• Flashes two short and one long: Device is in pairing mode.
• Flashes three times: Identify.

1. Power off

Safety Warning: Please install and maintain the device by a professional electrician. To avoid electric shock hazard, do not operate any connection or contact the terminal connector while the device is powered on!

2. Wiring Instruction

The wiring diagrams illustrate the connections for the 1C, 2C, and 3C models. Ensure power is disconnected before wiring. The diagrams show connections for Live (L), Neutral (N), and the respective load outputs (L1 for 1C; L1, L2 for 2C; L1, L2, L3 for 3C).

Important: For electrical safety, it is essential to install a Miniature Circuit Breaker (MCB) or a Residual Current Operated Circuit Breaker (RCBO) with an electrical rating of 10A for the 1C and 2C models, and 6A for the 3C model, before the M5-120W. Ensure all wires are connected correctly.

3. Power on

After powering on, the device will enter Pairing Mode by default during the first use. The LED indicator will flash in a cycle of two short and one long flash. The device will exit Pairing Mode if not paired within 10 minutes. To re-enter pairing mode, press and hold the button for 5 seconds until the LED indicator flashes in the specified pattern.

Method 1: Matter Pairing

Open a Matter-compatible App (e.g., Alexa App, Google Home App, or Apple Home App) and scan the Matter QR code on the Quick Guide or the device itself to add the device.

Method 2: eWeLink App Pairing

1. Download the "eWeLink" App: Please download the "eWeLink" App from Google Play Store or Apple App Store.
2. Add Device:
1. On the app, enter "Scan".
2. Scan the QR code on the device.
3. Follow the wiring instructions to connect the wires (ensure power is disconnected in advance and consult an electrician if needed).
4. Power on the device.
5. Long press the button for 5 seconds.
6. Check Wi-Fi LED indicator flashing status (two short and one long).
7. Select "Add Device" in the app.
8. Search for the device and start connecting.
9. Select the "Wi-Fi" network and enter the password.
10. The device will be added successfully.

Device Network Changing

Change the device's network by navigating to "Wi-Fi Settings" within the "Device Settings" page on the eWeLink App.

Device Factory Reset (Dual Ecosystem)

• After "Delete the Device" in the eWeLink App:
• For devices previously added to eWeLink, perform a new pairing using a different eWeLink account.
• For devices previously added in Matter, perform a new Bluetooth Pairing through Matter.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, providing reasonable protection against harmful interference in a residential installation. If interference occurs, users are encouraged to try correcting it by reorienting the antenna, increasing separation, using a different circuit, or consulting a technician.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits for an uncontrolled environment. It should be installed and operated with a minimum distance of 20 cm between the radiator and the user's body. The transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

ISED Notice

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003(B) and RSS-247 of Industry Canada.

(French summary: L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada. L'exploitation est autorisée aux conditions que l'appareil ne cause pas de brouillage et accepte tout brouillage subi. Cet appareil numérique de Classe B est conforme à la norme NMB-003(B) et RSS-247 du Canada.)

ISED Radiation Exposure Statement

This equipment complies with ISED radiation exposure limits for an uncontrolled environment. It should be installed and operated with a minimum distance of 20 cm between the radiator and the user's body. The transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

(French summary: Cet équipement est conforme aux limites d'exposition aux rayonnements de la ISED pour un environnement non contrôlé. Il doit être installé et utilisé à au moins 20 cm de distance d'un radiateur ou du corps de l'utilisateur. Cet émetteur ne doit pas être co-localisé ou fonctionner avec une autre antenne ou émetteur.)

SAR Warning

Under normal use, this equipment should be kept at a separation distance of at least 20 cm between the antenna and the body of the user.

(French summary: Dans des conditions normales d'utilisation, cet équipement doit être maintenu à une distance d'au moins 20 cm entre l'antenne et le corps de l'utilisateur.)

WEEE Warning

WEEE Disposal and Recycling Information: All products bearing this symbol are waste electrical and electronic equipment (WEEE) and should not be mixed with unsorted household waste. Users should protect human health and the environment by handing over their waste equipment to a designated collection point for recycling, appointed by government or local authorities. Correct disposal and recycling help prevent potential negative consequences to the environment and human health. Please contact local authorities for more information about collection points, terms, and conditions.

(French recycling instructions: Cet appareil et ses accessoires se recyclent. À déposer en magasin ou en déchèterie. Privilégiez la réparation ou le don de votre appareil! Points de collecte sur www.quefairedemesdechets.fr)

EU Declaration of Conformity

Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type [M5-1C-120W, M5-2C-120W, M5-3C-120W] complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://sonoff.tech/compliance/

(Italian waste separation instructions: RACCOLTA DIFFERENZIATA. Verifica le disposizioni del tuo Comune. Separa le componenti e conferiscile in modo corretto.)