WIRING DIAGRAM DEA700 Module - for Model FDUD4212
Service Manual UK
Component Key
- A: Mains power supply
- B: Heating element
- C: BLAC wash motor
- D1: BLAC drain pump
- D2: Synchronous drain pump
- E: Thermal actuator
- F: Door switch
- G: Dispenser solenoid valve
- H: AC wash motor
- I: Fill solenoid
- L: Regeneration Solenoid Valve Test
- M: Pressure switch
- N: Overflow switch
- O: Litre-counter turbine
- P: User interface
- Q: Soil sensor
- R: Reed Salt
- S: Reed Rinse Aid
- T: Thermal cut-out (95 °C)
- U: Fuse (206°C)
- V: Noise filter
- W: Fan
- Y: Ground connection
Wiring Connections Overview
This diagram illustrates the internal wiring of the DEA700 Module, a control board used in appliances like the Indesit FDUD4212. The board features numerous connection points and integrated components. The diagram shows how various external components connect to the module via multi-pin connectors and individual terminals.
Key Connections and Component Mapping:
- Mains power supply (A) is connected to terminals labeled L (Line), N (Neutral), and a ground connection (Y).
- The heating element (B) is connected to specific terminals on the board, likely for power distribution.
- The BLAC wash motor (C) and AC wash motor (H) connect to designated multi-pin connectors, indicating control and power signals.
- Drain pumps (D1, D2) are connected via separate terminals or connectors.
- Actuators and solenoids, such as the Thermal actuator (E), Dispenser solenoid valve (G), and Fill solenoid (I), are connected to specific points on the board.
- Switches, including the Door switch (F), Pressure switch (M), and Overflow switch (N), are wired to input terminals.
- Sensors like the Soil sensor (Q), Reed Salt (R), and Reed Rinse Aid (S) are connected to their respective input pins.
- User interface (P) and Litre-counter turbine (O) connect to specific data or control interfaces.
- Thermal protection components like the Thermal cut-out (T) and Fuse (U) are integrated or connected to protect the system.
- Additional components like the Noise filter (V) and Fan (W) are also shown with their connections.
- The diagram also indicates various internal connectors labeled J1 through J16, facilitating connections to different parts of the appliance.
- The board is identified as "DEA 700 - from SQG-DW-310_EN".
