Installation Guide for ARTMOS models including: HT-500MAX, HT500MAX, 2AZBA-HT-500MAX, 2AZBAHT500MAX, HT-500, Bluetooth Soundbar
ARTMOS INTERNATIONAL LIMITED HT-500MAX Star Niaht Liaht Projector 2AZBA-HT-500MAX 2AZBAHT500MAX ht 500max
File Info : application/pdf, 17 Pages, 4.78MB
DocumentDocumentHT-500 BLUETOOTH SOUNDBAR Instrucons Guide Contents Controls And Funcons -----------------------------------------1 What's In The Box? ---------------------------------------------- 2 Support ------------------------------------------------------------- 3 User Manual ------------------------------------------------------- 4 Using the AUX IN Cable -------------------------------------- 4 Using the ARC Input ------------------------------------------- 5 Using the Opcal Input --------------------------------------- 6 Using the MP3 Link Connecon (Line In) ----------------- 7 Connecng to the Mains Supply -------------------------- 8 Using the Bluetooth Operaon --------------- ------------ 9 Using the USB Operaon ------------------ ----------------- 10 Troubleshoong -------------------------------------------------- 11 Specificaons ------------------------------------------------- ---- 12 Quick System Installaon Guide ----------------------------- 13 Safety Informaon ----------------------------------------------- 14 Controls And Funcons Side View/Control Buons Back View 5.DC Power Input 6.AUX-IN Input 7.LINE-IN Input 8.OPTICAL-IN Input 9.USB-IN Input 10.ARC-IN Input 1 Box Contents HT-500 Soundbar 2. Power Adapter x 1 3. AUX IN Cable 4. Opcal Cable 5. User Manual 6. 3.5mm to 3.5mm Line In CabWtl'esha 7. 2 x Screws In 8. 2 x Expanded Rubber StoppeTrhe Box ? 1. HT-500 Soundbar 2. Power 3. AUX IN 4. 3.5mm to 3.5mm 5. User Manual Adapter Cable Line In Cable 2 Support Thank you for your purchasing the HT-500 Soundbar. Please follow the guidance of the user manual to set up your new purchase and begin enjoying its features. 3 Instructions Guide Using the AUX IN Cable Use the AUX Stereo Audio Cable (included) to connect the TV's stereo AUX (L/R) audio output socket. Connect the audio output cable of the soundbar via the `AUX' input sockets of the unit. Then press MODE on the remote control (Rem.18) or press the Mode button on the unit to scroll to the AUX IN function. Turn on your television Troubleshooting: If you are not receiving a picture or encountering interference, please ensure that the AUX cable is being connected to `output' AUX port on your TV set. This will ensure that the sound is being exported correctly. If your TV does not have `output' AUX port, please use an alternative connection method. AUX AUX stereo audio cable 4 Rear view of the unit Using the ARC Input You will need: An audio source with an ARC Audio Output and a ARC Audio cable (not included). Connect the ARC Audio cable to the ARC output on the audio source and to the ARC Input on the soundbar. Press the POWER button on the soundbar or POWER button directly on the remote control (Rem.10) to switch on the unit. Press the MODE button on the remote control (Rem.18) to switch to ARC mode or select the Mode button on main unit repeatedly to select the ARC mode. Using the native controls on your connected device, make sure the audio settings are set to ARC or HDMI Audio and are turned on. Audio from the connected audio source will now be played through the speakers. PT IC A ARC cable Rear view of the unit 5 Instructions Guide Using the Optical Input You will need: An audio source with an Optical Audio Output and a Digital Optical Audio cable (included). Connect the Digital Optical Audio cable to the optical output on the audio source and to the Optical Input on the soundbar. Press the POWER button on the sound bar or POWER button directly on the remote control (Ref.10) to switch on the unit. Press the MODE button on the remote control (Rem.18)to switch to Optical mode or select the Mode button on main unit repeatedly to select the Optical mode. Using the native controls on your connected device, make sure the audio settings are set to PCM or Optical Audio and are turned On. Audio from the connected audio source will now be played through the speakers. OPT ICAL OPTICAL IN OPTICAL cable 6 Rear view of the unit Using the MP3 Link Connection (Line In) Plug one end of a 3.5mm to 3.5mm Line In cable (included) into the Line In port on the unit. Before use, disconnect any cables connected to the Stereo RCAInputs. Plug the other end of the cable into the audio output/ headphone output on an MP3 player or other audio source. Press the Power button on the soundbar or POWER button directly on the remote control (Rem.10)to switch on the unit. Press the Mode button repeatedly on the soundbar or press the MODE button on remote control (Rem.18) repeatedly to enter LINE in mode. Audio played through the connected device will now be heard through the speakers. LINE-IN 3.5mm to 3.5mm Line In cable Audio device 7 Instrucons Guide Connecng to the Mains Supply Ensure that the power supply voltage is in the voltage of 100V~240V. This unit is designed to use adapter. Connecng the unit to any other power source may cause damage to the unit. Unwind the mains cable to its full length. Connect the mains plug to a mains socket. Make sure the mains plug is fully inserted into the mains socket. Connect the adapter to the unit via the DC input Socket. (DC-24V-IN) DC 18V IN ! 8 DC-in Power Cable Ensure all audio connecons ohe unit are connected before connecng to the mains power socket. Unplug the power cord from the outlet when the unis use for an extended period oime. Instrucons Guide Using the Bluetooth Operaon Pairing a Bluetooth Device for the First Time Press the POWER buon on the unit or the POWER buon on the remote control (Rem.10) to switch on the unit. Select and press the MODE buon repeatedly on the remote control unl in Bluetooth mode (Rem.18)or press the Mode buon repeatedly on the sound bar to enter Bluetooth mode. Using the nave controls on your Bluetooth device, select the "GS-SB106" in your Bluetooth sengs to pair. Refer to the user manual for your specific device for instrucons on pairing and connecng Bluetooth devices. When successfully paired and connected, a beep will issue from the unit. Aer inial pairing, the unit will stay paired unless unpaired manually by the user. If your device should become unpaired or you find it is unable to connect, repeat the above steps. 9 Playing Audio Wirelessly Follow the instructions for pairing a Bluetooth device. Use the native controls on the connected Bluetooth Device to select a track. To Play/Pause the track or Skip Forwards/Backwards to a selected track, use the remote control (Rem.12,13,19). Audio played through the connected Bluetooth device will now be heard through the speakers. Using the USB Operation Insert USB to Play Music Automatically. Select and press the MODE button repeatedly on the remote control until in USB mode (Rem.18) or press the Mode button repeatedly on the soundbar to enter USB mode. To Play/Pause the track or Skip Forwards/Backwards to a selected track, use the remote control (Rem.12,13,19). Audio played through the connected USB device will now be heard through the speakers. 10 Troubleshoong Ihe soundbar does not work properly as desired, please check the following. Malfuncon No power / funcon No sound No sound from bluetooth connecon Possible causes/measures Check whether the power is switched on or off ahe wall. Check whether the power adaptor is properly connected to power outlet or not. Check whether cables are properly installed. Ihey are, please try alternave cable to conneco your TV if possible. Check unis out of standby and in mode. Forgehe soundbar from your device and reconnect. Funcon disturbance Remote control does not work [properly] Switch off and unplug the unit. Leave ior 2 minutes and switch it on again. If a parcular mode is causing problems, please try an alternave connecon to your TV such as Opcal or Bluetooth. Check whether the baery run out or not. Replace with a new one if necessary. Check whether there is obstacle on the front of remote sensor. 11 Specificaons Specificaons Power Supply DC 24V Power Output 20W 4 Speaker Size 2 inch 1 Working environment (Temperature) -10~ + 55C Relave Humidity Frequency Response 5% ~ 90% 50Hz~18KHz Bluetooth Dimension (LxWxH) V5.0 7H 12 Quick System Installaon Guide Place the paper guide on the wall where you wano hang the soundbar. Verify with a level gauge thahe inclinaon angle ohe soundbar is zero degrees. Locate the screw holes on the paper guide and mark a point with a pencil. Make the holes with the corresponding drill bit according to the type of wall. Is advisable to leave no more than 5mm For a beer sound experience, between the head ohe screw and the wall is advisable to place the soundbar to minimize the inclinaon angle ohe soundbar. ahe same height ohe ear. 13 1. Read these user manual. 2. Keep these user manual. 3. Heed all Warnings 4. Follow all instrucons 5. Do no clean the apparatus near or with water 6. Do not block any venlaon openings. Install in accordance with the manufacturer's instrucons 7. Do nonstall near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8. Proteche power from being walked on or pinched parcularly at plugs, convenience receptacles, and the point where they exirom the apparatus. 9. Only use aachments/accessories specified by the manufacturer. 10. Unplug this apparatus during light storms or when unused for long periods oime. 11. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in a way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to the rain or moisture, does not operate normally or has been dropped. 12. No naked flame sources, such as lit candles, should be placed on the apparatus. 13. Dispose of used electrical products and baeries safely according to your local authority and regulaons. ADDITIONAL WARNINGS The apparatus shall not be exposed to dripping or splashing and no objects filled with liquid, such as vases, shall be places on the apparatus. Main plug is used to disconnect device and it should remain readily operable during intended use. In order to disconneche apparatus from the main mains completely, the mains plug should be disconnected from the main socket outlet completely. Baery shall not be exposed to excessive heat such as sunshine, fire or the like. RECYCLING ELECTRICAL PRODUCTS You should now recycle your waste electrical goods and in doing so help the environment. This symbol means an electrical product should not be disposed of with normal household waste. Please ensure is taken to a suitable facility for disposal when finished with. IMPORTANT: Please read all instrucons carefully before use and keep for future reference. Risk of electric shock. Do not open ! Read all instrucons carefully before use and keep for future reference When servicing, use only idencal replacement parts CAUTION RISK OF ELECTRIC SHOCK DO ! NOT OPEN ! IMPORTANT: Please read all instructions carefully before use and keep for future reference. 14 FCC Warning This device complies with part 15 of the FCC rules. Operaon is subject to the following two condions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operaon. Changes or modificaons not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interferenceto radio or television recepon, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures: · Reorient or relocate the receiving antenna. · Increase the separaon between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. Radiaon Exposure Statement This equipment complies with FCC radiaon exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. 15Adobe PDF library 10.01 Adobe Illustrator CS6 (Windows)