Sears Electric Dryer Model 417.81942710

Product Information

Model Number: 417.81942710

Brand: Sears

Product Type: Electric Dryer

For parts or service, call: 1-800-4-MY-HOME® (1-800-469-4663)

Visit: www.sears.com

Published by Sears Brands Management Corporation, Hoffman Estates, IL 60179. Publication number 5995703013.

Electric Dryer Overview

This document provides a detailed repair parts list and wiring diagram for the Sears Electric Dryer, model 417.81942710. It is essential to provide the complete model number found on the serial plate inside the dryer door when ordering parts or requesting service.

All repair parts are available for immediate purchase or special order at Sears Parts & Repair Centers or Service Departments. Parts can also be ordered by phone or online.

When requesting service or ordering parts, please provide the following information:

• Product Type
• Model Number
• Part Number
• Part Description

Note: The illustration numbers in the diagrams are for reference; use the Kenmore part number for ordering.

Cabinet and Drum Components

This section details the parts associated with the dryer's cabinet and drum assembly.

Diagram Description: An exploded view of the dryer's main cabinet and drum assembly. It shows the outer casing components like the front panel (150), side panels (152), and rear panel (151). Internal components visible include the heating element cover (121), grating (122), door lock mechanism (157), air ducts (160, 161), and the drum itself (600) with its vanes (601), drive belt (602), and various gaskets (603, 604, 608). Other parts like the door hinge (108), level leg (130), and filter (162) are also depicted.

Parts List: Cabinet/Drum

Door Components

This section details the parts associated with the dryer's door.

Diagram Description: An exploded view of the dryer door. It shows the inner and outer door frames, the glass panels (inner and outer), door hinges, hinge pins, door lock strike, and the door switch and LED lamp.

Parts List: Door

Controls and Top Panel Components

This section details the parts for the dryer's control panel and top assembly.

Diagram Description: An exploded view of the dryer's top panel and control panel assembly. Components include the main top panel (153), the control panel (210) with its handle, buttons (272), springs (272A), and a diffuser (274A) for the luminous diode. The main control board (587A) is also shown.

Parts List: Controls/Top Panel

Motor and Condenser Components

This section details the parts related to the motor and condenser assembly.

Diagram Description: An exploded view of the dryer's motor and condenser system. Key parts include the condenser basement (400), fan wheel covers (401, 402), pump support (403), pump cover (405), condenser door gasket (406), condenser door (407), door lock knob (408), and discharge pipe (409). The condenser assembly (415) and its handle (416) are shown, along with various gaskets and seals (430A, 430D, 431). The water tank components (440, 441, 442, 443) and hoses (450A, 450B) are also illustrated. The motor reduction gear (504) with its dampers (504A) and drive belt (504B) is a central part, along with motor bushings (514, 514A), tension springs (524, 524A), and fan wheels (530, 531). Various fixing brackets (532, 533) are also shown.

Parts List: Motor/Condenser

Burner, Pump, and Sensor Components

This section details parts for the burner, pump, and sensor systems.

Diagram Description: An exploded view showing the condensation pump, heater, micro switches, humidity sensor, and temperature probe.

Parts List: Burner/Pump/Sensors

Wiring Diagram

This section provides the electrical wiring diagram for the dryer, illustrating the connections between various components.

Diagram Description (Page 12 & 13): The wiring diagram illustrates the electrical system of the dryer. It shows the power supply connections, anti-interference filter, main board, and UI (User Interface) board. Key components connected include the door switch, drum light, motor, NTC heat sensor, condensation pump, temperature probe, and humidity sensor. The diagram details terminal connections (e.g., J1, J2, J3, etc.) on the main and UI boards, indicating wire colors and signal types (e.g., +15V, GND, DATA, OUT).

Main Board Connections (Page 13): The main board receives power and signals through various terminals (J1-J16). It controls components like the heating element (LOAD 1, LOAD 2), condensation pump, motor, and communicates with the UI board via DATA and GND lines. It also interfaces with sensors like the temperature probe, humidity sensor, and door switch.

UI Board Connections (Page 13): The UI board handles user input and displays information. It connects to the main board and receives signals from sensors and switches.

Service and Support Information

For troubleshooting, product manuals, and expert advice, visit managemylife.com.

For repair services, including in-home service for major appliances, lawn and garden equipment, and heating/cooling systems, contact:

• Your Home Service: 1-800-4-MY-HOME® (1-800-469-4663)
• Sears Parts & Repair Service Center (Carry-ins): 1-800-488-1222 (U.S.A.), 1-800-469-4663 (Canada)

To purchase a protection agreement:

• 1-800-827-6655 (U.S.A.)
• 1-800-361-6665 (Canada)

For service in Spanish:

• 1-888-SU-HOGAR® (1-888-784-6427)

For service in French (Canada):

• 1-800-LE-FOYER MC (1-800-533-6937)

Visit sears.com or sears.ca for more information.