Instruction Manual for BARSKA models including: AE10750, BC462, BC462 Starwatcher Telescope, BC462, Starwatcher Telescope, Telescope
Product Manuals - BARSKA
File Info : application/pdf, 2 Pages, 168.67KB
DocumentDocumentStarwatcher Telescope 70060, 525 Power Description The 525 power Starwatcher with an aperture of 60mm and a focal length of 700mm is an ideal entry-level telescope for the aspiring amateur astronomer. It is easy to set up and comes with everything necessary to begin the adventure of a lifetime including telescope, finderscope, diagonal, three eyepieces, moon filter, Barlow lens, mount and tripod. The beginner's version of Barska's popular Deepsky Astronomy Software leads this journey into space. The software is packed with many features that both experienced and novice users will appreciate and includes a searchable database of over 10,000+ objects including, nebulae, star clusters, double stars, and variable stars. Simply load it into a PC and begin your journey to the stars and planets. Specifications Telescope Type Maximum Attainable Power Focal Length (mm) Objective Lens Diameter (mm) Finderscope Mount Eyepiece 1 Eyepiece 2 Eyepiece 3 Barlow Lens Erecting Image Eyepiece Moon Filter Accessory Tray Tripod Optical Coating Telescope Weight (kg/lbs) Refractor 525x 700 60 Red Dot Altazimuth SR4 H12 H20 3x 1.5x Yes Yes Aluminimum Fully Coated 3.2/7 See reverse side for additional information For detailed usage see included telescope manual www.barska.com Starwatcher Telescope Quick Set Up - 70060, 525 Power Parts Included CAUTION: DO NOT LOOK DIRECTLY AT THE SUN. VIEWING THE SUN OR ANY LIGHT SOURCE WITH THIS OPTICAL DEVICE CAN CAUSE PERMANENT EYE DAMAGE. K Two Knurled Nuts A Three Eyepiece Containers D Two Optical Tube Screws E Three Leg to Yolk Screws H Moon Filter I Finderscope L Main Telescope Optical Tube P Three Center Leg Brace Screws B Three Eyepieces F Three Tripod Leg Screws M Two Barlow Lenses N Accessory Tray O Center Leg Brace C Diagonal Assembly G Screwdriver J Yolk Mount 1 Q Slow Motion Control Rod 2 R Control Rod Screw S Three Tripod Legs 3 Attach (F) tripod leg screw to the extension base on each of the (S) tripod legs. 4 Attach each (S) tripod leg to the (J) yolk mount using the (E) leg to yolk screw sets. 5 Use the (P) center leg brace screws on the (O) center leg brace to connect each of the center leg braces to the three (S) tripod legs. 6 Place the (N) accessory tray on top of (O) center leg brace. Thread the (N) accessory tray into the threaded hole in the center of the (O) leg brace and screw into place. 7 Line up the (L) main telescope optical tube with the side mount holes on the (J) yolk mount and secure in place using the two (D) optical tube screws. 8 Insert the (Q) slow motion control rod into the hole on the (J) yolk mount. Then secure the (Q) slow motion control rod with the included (R) control rod screw by tightening it with the included (G) screwdriver. 9 Remove the (K) knurled nuts and attach the Insert the chrome barrel of the (C) diagonal Choose one (B) eyepiece and insert the (I) finderscope to (L) main telescope optical into the focuser tube on the (I) main chrome barrel of the eyepiece into the (C) tube with the battery compartment and lens telescope optical tube and tighten the diagonal and tighten the set screw. facing the front of the telescope. Secure by tightening the (K) knurled nuts. set screw. See reverse side for additional information. For detailed usage see included © 2016 BARSKA® telescope manual. BC462 Pomona, CA 91767 | (t) 888.666.6769 | (f) 909.445.8169 | www.barska.com 4/16