User Manual for iFi audio models including: uno DAC and Headphone Amplifier, uno, DAC and Headphone Amplifier, Headphone Amplifier, Amplifier
iFi audio | the Award-Winning Audio Technology Company
uno - iFi audio
File Info : application/pdf, 1 Pages, 142.73KB
DocumentDocument12 3 4 5 Thank you for purchasing the UNO. The UNO is a USB-audio DAC amplifier. 1. EQ mode selection This button selects the following EQ modes. The colour of the EQ mode LED on top (item 6) indicates the selection. Game Movie Music Off 2. PowerMatch PowerMatch setting should be off for IEMs and on for on/over-ear headphones. Warning: Due to the high power of UNO, before changing the PowerMatch setting, always start off at a low volume level so that there is no risk of damage to your headphones, speakers or your hearing. iFi audio is not responsible for any hearing or equipment damage from misuse. 3. Power ON/OFF and Volume control This is the power switch and volume control knob. 4. Audio Format LED (kHz) The LED colour scheme indicates the audio format and sampling frequency received by UNO from the music source. LED Mode Green PCM 44.1/48/88.2/96kHz Yellow PCM 176.4/192/352.8/384kHz Cyan DSD 64/128 Blue DSD 256 Magenta MQA 5. S-Balanced 3.5mm headphone output Connect 3.5mm stereo headphones. Compatible with both TRS and TRRS confiurations. 7 8 7. RCA analogue Line output Connect analogue RCA interconnects to an amplifier. 8. USB-C audio and power input This is a USB-C input. It connects UNO to the computer or phone audio source and can also be powered by it. Plays up to 32-bit 384kHz PCM, DSD256 and is an MQA renderer. Note: For use with PC it is necessary to download drivers. Tip: For the required driver and all the latest firmware updates please visit our website: https://ifi-audio.com/download-hub/ Specification Digital Input: USB-C Formats: DSD 256 /11.3MHz DXD 384kHz PCM 384kHz MQA DAC: Bit-Perfect DSD & DXD DAC by ESS Line Section Output: 2V max. Output Impedance: <100 SNR: 119dBA DNR: 115dB @ 0dBFS THD+N: 0.03% @ 0dBFS Headphone Section Output: 2.6V / 3.5V max. at 32 / 300 Output Power: 211mW @ 32; 39mW @ 300 Output Impedance: <1 SNR: 113dBA DNR: 110dB @ 0dBFS THD+N: 0.02% (1.27V @ 16) Channel separation: 80dB (1kHz/600) Frequency Response: 10-80kHz(-0.5dB) Power supply requirement: USB-C 5V/0.5A Power consumption: No Signal ~0.8W Max Signal ~1.5W Dimensions: 88 x 81 x 26 mm (3.5" x 2.8" x 1.0") Net Weight: 92 g (0.2 lbs) Limited Warranty: 12 months* *12 months typical or as permitted/required by local reseller laws. **Specifications are subject to change without notice. 6 6. EQ mode LED The LED colour scheme indicates the UNO's EQ mode, please see item 1. ifi-audio.com Ver1.1