User Guide for Guest Internet models including: STAR-7 kit Internet Managed WiFi Products and Cloud Service, STAR-7 kit, Internet Managed WiFi Products and Cloud Service, Managed WiFi Products and Cloud Service, WiFi Products and Cloud Service, Cloud Service
Guest Internet Managed WiFi products and cloud service
File Info : application/pdf, 2 Pages, 755.36KB
DocumentDocumentStarlink Community Internet Service STAR-7 kit An easy to install kit that adds two wireless access points for the STAR-6 kit using your Starlink Share or sell an Internet service to a community using Guest Internet to manage the Starlink service. Everything you need in one kit to start providing a community Internet service using your Starlink antenna. We have a selection of ready to use complete kits with full installation instructions, using high performance products. Easy self-install and management of the Internet service, you do not depend on others. Multi-language: English and Spanish. Print vouchers with access codes to give people access: duration, data speed and data limits. Monitor the service for failures: get alerts. Protection from abuse of the Internet service; prevents unauthorized Internet access. No other fees, maintenance, license, software, services or contracts. Free support, free upgrades. Free cloud service; manage the Internet from anywhere. Branding is easy to customize your Internet service. Community Internet using Starlink: easy to install and operate Many communities have apartment buildings with limited or no Internet service. The STAR-6 and STAR-7 kits are designed to operate with a Starlink antenna to provide a managed Internet service for an apartment building. The Starlink Internet operates almost everywhere in the world and can be shared with residents in a community when the Internet service is managed using a Guest Internet controller. The unique Guest Internet features maintain good Internet performance for many users while ensuring that Starlink requirements are not exceeded. The STAR-7 kit is a wireless expansion for the STAR-6 kit The STAR-7 kit adds wireless access points to the STAR-6 apartment building kit so that a larger area can have WiFi access. Each WAP-1 wireless access point connects to the GIS-R4 provided with the STAR-6 kit. The WAP-1 wireless access points are installed throughput the building to provide good wireless coverage. The GIS-R4 sets rules for Internet access so that the service from one Starlink antenna can be shared between many people, and to ensure that the Starlink data capacity is not exceeded which may result in a service interruption. www.guest-internet.com Starlink Community Internet Service The STAR-7 kit provides wireless expansion for the STAR-6 kit Two of the WAP-1 indoor wireless access points Ethernet cables 12v power supplies Complete guide, how to connect, configure and provide your Internet service The Starlink antenna is not included The installer has to provide the Ethernet cable that connects the GIS-R4 to each WAP1 wireless unit. The WAP-1 can be powered with the 12v supply provided, or with a PoE switch. If required each WAP-1 wireless access point can be powered from a 48v PoE switch. STAR-7 In building expansion kit for STAR-6 WAP-1 Wireless access point Connect to a GIS-R4 controller Two high power indoor wireless access points WAP-1 Mobile users Guest Internet features that manage the Starlink community Internet service Call 1-800-213-0106 for further information, or see our website: www.guest-internet.com Fire4 Systems Inc, Guest Internet Solutions, 6073 NW 167 St., Unit C-12, Miami, FL 33015, USA. Guest Internet Solutions is a business unit (DBA) of Fire4 Systems Inc., a Florida Corporation. Copyright © Fire4 Systems Inc., 2024. All rights reserved. Fire4, Guest Internet, Hospitality Internet and the respective logos are registered marks of Fire4 Systems Inc. All other registered marks, trademarks, service marks and logos are the property of their respective holders.