Manuals+

ARD-1-100-TP: Three-Phase EV Connection Unit

A three-phase connection unit suitable for 1 x 100A TPN load.

Product Overview

The matt:e ARD connection centres provide a simple to install dedicated EV connection centre. It features built-in O-PEN® technology, allowing for the connection of EV charge points to the PME earthing facility without the need for separate earth electrodes. This design helps facilitate compliance with BS:7671. 2018 Amendment 1, 2020 Regulation 722.411.4.1.(iii). The matt:e ARD connection centres incorporate a unique 5-pole auto-reset device that automatically restores power to the load once a fault has been cleared.

Description of the matt:e ARD-1-100-TP connection unit: The image shows an open electrical enclosure. Inside, there are multiple components. On the left, there are three red main switches (likely for phase isolation). Below these, there are two rows of smaller blue switches, each row containing four switches. In the center-top, there is a black box labeled "GreenTec O-PEN Monitor" with a blue rotary switch on its right side. The enclosure itself appears to be made of powder-coated mild steel. The internal wiring is visible, connecting these components.

Product Features and Benefits

  • ✔️ Built-in O-PEN® technology
  • ✔️ NO EARTH ELECTRODES REQUIRED
  • ✔️ Helps reduce disruptive and costly groundworks
  • ✔️ Removes the risk of striking buried services
  • ✔️ Simple wire in wire out connection
  • ✔️ Phase loss protection
  • ✔️ Suitable for 1 x 100A TPN load
  • ✔️ Mild steel IP4X enclosure
  • ✔️ Standard 1 Year parts warranty

Technical Specifications

SpecificationDetails
Input Volts400V 50Hz
Max Load100amps
Cable Entry FacilityTop and bottom
Terminal Capacity50mm²
Dimensions (H x W x D)550mm x 360mm x 120mm
WeightApproximately 7KG
EnclosureMild Steel Powder Coated
Ingress ProtectionIP4X
Warranty1 Year
Models: ARD-1-100-TP Three Phase Connection Unit, ARD-1-100-TP, Three Phase Connection Unit, Connection Unit, Unit

File Info : application/pdf, 1 Pages, 265.69KB

PDF preview unavailable. Download the PDF instead.

ARD-1-100-TP

References

GPL Ghostscript 10.04.0

Related Documents

Preview matt:e ARD-1-32-TP-M Three-Phase EV Connection Unit with O-PEN® Technology
Explore the matt:e ARD-1-32-TP-M, a three-phase EV connection unit featuring O-PEN® technology and an auto-reset isolator. Compliant with BS:7671, it simplifies EV charging installations by eliminating the need for earth electrodes.
Preview matt:e EVU-1-100-TP: Three-Phase EV Connection Unit with O-PEN Technology
Detailed information on the matt:e EVU-1-100-TP, a three-phase connection unit for 1 x 100amp TPN loads, featuring O-PEN technology, a 5-pole isolator, and IP4X enclosure. Specifications, features, and dimensions included.
Preview matt:e ARD-1-100-TP-SPD: Three-Phase EV Connection Unit with Type 2 SPD
Explore the matt:e ARD-1-100-TP-SPD, a dedicated three-phase EV connection unit with O-PEN® technology, auto-reset isolator, and Type 2 SPD, designed for simple installation and compliance with EV charging regulations.
Preview matt:e ARD-1-63-TP-R-SPD Three-Phase EV Connection Unit with O-PEN® Technology
The matt:e ARD-1-63-TP-R-SPD is a three-phase EV connection unit featuring auto-reset isolation, Type 2 SPD, and a 63A TPN Type A RCBO. It simplifies EV charge point installation by connecting to the PME earthing facility without separate earth electrodes, ensuring compliance with BS:7671.
Preview matt:e ARD-6-32-R-SPD Three-Phase EV Connection Unit
Discover the matt:e ARD-6-32-R-SPD, a robust three-phase EV connection unit featuring O-PEN® technology, an auto rest isolator, Type 2 SPD, and 6 x 32A DP Type A RCBOs. This datasheet details its features, benefits, and technical specifications for simplified EV charging installations.
Preview Matt:e IP-EVCP-T: Single-Phase EV Voltage Monitoring and Protection with Isolator
Discover the Matt:e IP-EVCP-T, a single-phase voltage monitoring and protection device with a built-in isolator in an IP65 enclosure. Ideal for dedicated EV connection centers, it offers PEN fault protection, load curtailment, and compliance with BS:7671 regulations. Learn about its features, benefits, and technical specifications.