User Manual for BOCCI models including: 38.3V, Ceiling Suspension Light, 38.3V Ceiling Suspension Light, Suspension Light, Light
38.3V Ceiling Mounted - Bocci
File Info : application/pdf, 2 Pages, 264.55KB
DocumentDocumentSTEM - CEILING MOUNTED 38.3V PRODUCT SPECIFICATION 35 (1.38") 142 (5.6") 926 (36.5") 1860 (73.2") PENDANTS: three MOUNTING: 142mm (5.6") x 35mm (1.38") LAMPING: 1.5w LED STEM LENGTH 0.9m (3') or 1.8m (6') long stem ADDITIONAL 153mm (6") / 305mm (12") / 914mm (36") / EXTENDERS 1524mm (60") MATERIALS: blown glass, electrical components, unlacquered brass or black powder coated brass stem, black or white canopy WEIGHT: approximately 8.8kg (19.4lb) / 9.7kg (21.4lb) POWER SUPPLIES: integral DESCRIPTION The stem ceiling mounted system comes in unlacquered brass or black powder coated stem with a 142mm (5.6") diameter mounting plate rated for ceiling use. 38V is a variant of the original 38 series where a large glass sphere is blown with a multitude of haphazard interior cavities, which intersect and collide in unpredictable ways. 38V is smaller, lighter and suspended with coaxial cables. The interior cavities can be filled with plants or left empty.. Standard 38V are made with clear glass exterior spheres and milk white interior lamp holder cavities. NOTES + Purchase replacement lamps online at www.bocci.com/shop/bulbs + Power supply can be remote mounted with 94mm (3.7") x 6mm (0.24") canopy. + The brass used in our Stem Series is untreated and, as such, will develop a natural patina over time. To avoid any marking or tarnish on the brass during handling and installation, please use the gloves provided in your shipment. + To maintain your fixture, please regularly dust with a lint-free cloth. If further cleaning is required, dampen a lint-free cloth with water only and wipe gently to remove dust or debris. ±190-210 (7.5"-8.5") EU Patent # 002071019-001 Made in Vancouver, Canada approx 8.8kg (19.4lb) approx 9.7kg (21.4lb) sales@bocci.com www.bocci.com europe@bocci.com www.bocci.com LOW VOLTAGE LUMINAIRE E476186 © 2021, Bocci Design and Manufacturing Inc. All rights reserved. Any inquiries should be directed to: info@bocci.com REMOTE line voltage Ø25 (1") max. 12V INTEGRAL Line (black) Neutral (white) Input mounting plate canopy cover 12V 1 Thread the cover cap on one end of the stem. Note: Bocci recommends wearing thin gloves during installation to protect the stem finish and the glass surface. 2 Connect the stem pieces by threading the stem connector to the stems. Note: This step is only necessary for overall stem lengths longer than 1.8m (6'). 3 Thread the pendant mounting plate onto the stem. Carefully insert provided lamp into socket. 4 Connect power supply to line voltage. i. Connect input low voltage wire to 12V DC output wires by feeding the wires through the slots on the mounting plate. ii. Connect the black wire to line wire and white wire to neutral wire. iii. Ensure that line voltage is not active during this part of the installation! Note: As an option, Bocci recommends mounting power supplies remotely in a close, accessible and hidden location for ease of long term maintenance. Installation to be done by certified personnel to ensure compliance with the code. 5 The client is responsible to ensure fasteners are attached to a robust structural substrate. Affix mounting plate to surface with fasteners provided. Thread canopy cover onto the mounting plate. Thread on the stem to canopy. Turn power to fixture on. 6 Gently thread pendant onto the stem. Be sure to carefully place the pendant so as not to damage the lamp during installation.. Clean fingerprints from fixture surfaces. For additional assistance, please contact Bocci: sales@bocci.com www.bocci.com europe@bocci.com www.bocci.com EU Patent # 002071019-001 Made in Vancouver, Canada STEM - CEILING MOUNTED 38.3V PRODUCT INSTALLATION INSTRUCTIONS LOW VOLTAGE LUMINAIRE E476186 © 2021, Bocci Design and Manufacturing Inc. All rights reserved. Any inquiries should be directed to: info@bocci.com