Date: 12 December 2024

Federal Communications Commission (the "Commission" or "FCC")
Authorization and Evaluation Division
7435 Oakland Mills Rd.
Columbia, MD 21046
USA

RE: Attestation Statements 6ID Filing – FCC ID: SWX-UDR7

We, Ubiquiti Inc., attest that this device under FCC ID SWX-UDR7 complies with device protocol requirements and operational restrictions: for indoor client 6ID.

1. Device Protocol Attestation Statement

a. Statement for modules only: This device is not a module so this is not applicable.

b. Statement describing the method the indoor access point uses to control the associated client/subordinate power control.

Beacon and Probe Response frames sent by 6 GHz APs include Transmit Power Envelope (TPE) elements which specify the regulatory transmit power limits for client devices and (where applicable) Subordinate Devices. The transmit power limits are expressed as total transmit power EIRP and/or PSD EIRP as appropriate.

For example, a Low Power Indoor (LPI) AP in the US sends a TPE element where the Maximum Transmit Power Interpretation subfield indicates Regulatory Client EIRP PSD, and the Maximum Transmit Power field indicates -1 dBm/MHz.

A Standard Power AP in the US sends a similar TPE element except that the values in the Maximum Transmit Power field are obtained from an AFC System. In addition, if those AFC-derived PSD limits do not guarantee compliance with the total EIRP limit, and additional TPE element is sent where the Maximum Transmit Power Interpretation subfield indicates Regulatory Client EIRP, and the Maximum Transmit Power field indicates the total client EIRP limit of 30 dBm.

2. Statement acknowledging device restrictions

a. Low-power indoor Access Point. Access Point operating in the 5.925-7.125 GHz band shall be supplied power from a wired connection, has an integrated antenna, is not battery-powered, and does not have a weatherized enclosure.

b. This device's operation will not be allowed on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet only in the 5.925-6.425 GHz band.

c. Indoor access points are prohibited for control of or communications with unmanned aircraft systems, including drones.

Sincerely,

Alex Macon
Ubiquiti Inc.
Compliance Officer

www.ui.com

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=7965684 Microsoft Word 2016 Microsoft Word 2016

Related Documents

Preview Ubiquiti UDR7 Radio RF Test Report Attachment - UNII-1 Band
This document provides detailed RF test results for the Ubiquiti UDR7 Digital Transmission Radio, covering emission bandwidth, RF output power, power spectral density, and occupied channel bandwidth in the UNII-1 frequency band, as performed by Unified Compliance Laboratory.
Preview UDR7 Wireless Device RF Test Report Attachment
This document presents the RF conducted test results for the UDR7 wireless device, performed by Unified Compliance Laboratory. It covers compliance with FCC and ISED regulations for the UNII-2, UNII-2a, and UNII-2c frequency bands, detailing device identification, testing facility accreditation, and a summary of RF performance metrics including emission bandwidth, output power, and power spectral density, all of which passed regulatory requirements.
Preview Ubiquiti Dream Router Setup Guide
Step-by-step guide for setting up the Ubiquiti Dream Router using the UI Mobile application, covering initial connection, configuration, and device status.
Preview Ubiquiti SWX-U7PROM FCC and ISED Canada Compliance Information
This document provides essential E-Label user information for the Ubiquiti SWX-U7PROM device. It details FCC and ISED Canada compliance statements, operating conditions, restrictions, and RF exposure warnings, ensuring users understand regulatory requirements.
Preview Ubiquiti UX7-SP FCC Certification Request
Letter requesting FCC Original Equipment Certification for the Ubiquiti UX7-SP access point, detailing its features and FCC ID.
Preview Ubiquiti U7PRO E-Label User Information
Provides E-Label user information for the Ubiquiti U7PRO, including FCC and ISED Canada compliance statements, RF exposure warnings, and operating restrictions.
Preview Ubiquiti Inc. FCC Application TC669598 Short-Term Confidentiality Release Notification
Notification from Telefication.com regarding the approaching short-term confidentiality release date for Ubiquiti Inc.'s FCC application TC669598 (FCC ID: SWX-UAINT), granted on January 30, 2024. Action may be required to maintain confidentiality.
Preview Ubiquiti Inc. Attestation Statement for FCC Filing - SWX-UDBPS
Attestation statement from Ubiquiti Inc. confirming that the applicant is not identified on the Covered List for FCC ID SWX-UDBPS.