COMMERCIAL SHEET VINYL - WALL

Installation Guide

Store the sheets for at least 25 hours before installation at the construction site.
Maintain the room temperature of minimum 15°C prior and throughout the installation.
Moisture content of the substrate (wall) should be less than 5%.
Store the rolls upright.
Before installation, make sure the substrate (Wall) is dry, sound, clean and flat.
There should be no exposure to moisture.
Cut the wall coverings into required sizes before installation.
Do not step on the product with shoes on.
Make sure the substrate (wall) is flat and hard and if necessary, restore the flatness of the wall.

Cut the sheet into a size 5-10cm larger than the wall size.
Use an acrylic adhesive emulsion. Follow the adhesive manufacturer's instructions.
Apply the adhesive thoroughly on the wall using a toothed spatula – a spatula with small size tooth is recommended.
Make sure to follow open time instructions – open time may vary accordingly to the environment.
After the adhesive open time, install the first sheet on the wall.
As soon as the wall covering is in position, use a spatula to remove air pocket to the edge of the sheet.
When installing the second sheet, make sure to overlap the sheet on the first one by minimum 5cm.
With a utility knife and a ruler, cut the overlapping sheets to make the seam tightly fit edge to edge.
Remove the adhesive and other residues and roll with a hand roller to flatten the ridges.
When applying coving, cut the wall covering to the right size.

After installation, inspect the wall to ensure that there is no adhesive residues remaining.
Use methylated spirits and a clean cloth if necessary.
Wait 48 to 72 hours after installation before carrying out any work on the wall covering.
Use a protective film if necessary and avoid sticking any type of adhesive tape directly on to the wall covering.

	Superior Vinyl Plank Installation Guide (2.0mm - 3.0mm) A comprehensive guide for the installation of Rhino Flooring Range's Superior Vinyl Planks (2.0mm - 3.0mm products), covering preparation, installation steps, and considerations for radiant heating systems.
	Rhino Flooring Range Hybrid Flooring Installation Guide - Santa Monica XL Comprehensive installation guide for Rhino Flooring Range's Santa Monica XL Hybrid Flooring, covering subfloor preparation, installation steps, and custom stair tread fitting according to Australian Standards.
	Rhino Flooring Range Carpet Tile: 15 Year Commercial Warranty Details the 15-year commercial warranty for Rhino Flooring Range Carpet Tiles, covering product performance, exclusions, and the claims process. Includes a depreciation scale for warranty claims.