User Manual for microtech models including: 17025 Inside Micrometer Innovative Measuring Instruments, 17025, Inside Micrometer Innovative Measuring Instruments, Micrometer Innovative Measuring Instruments, Innovative Measuring Instruments, Measuring Instruments
28 de ago. de 2022 — Clean the oil from the measuring surfaces of micrometer by cloth. For internal micrometers with range up to 1500mm use Standard gauge to.
Нутромер микрометрический НМ - MICROTECH - Innovative measuring instruments
ISO 17025 CALIBRATION INTERNAL MICROMETER USER MANUAL ISO17025:2017 ISO 9001:2015 MODIFICATIONS Item No Range Resolution Accuracy Extention rods Standard gauge Calibration mm mm mm mm ISO 17025 132005030 50-300 ±0,008 13, 25, 50 (2pcs), 100 + + 132005060 50-600 ±0,015 13, 25, 50, 100, 150, 200 + + 132005100 50-1000 ±0,020 13, 25, 50, 100 (2pcs), 150, 200, 300 + + 132005150 50-1500 0,01 ±0,025 13, 25, 50, 100 (2pcs), 150, 200 (2pcs), 300 (2pcs) + + 132005200 1000-2000 ±0,030 50, 100 (2pcs), 200, 500 - + 132005300 1000-3000 ±0,050 50, 100 (2pcs), 200, 500, 1000 - + 132005400 1000-4000 ±0,060 50, 100 (2pcs), 200, 500, 1000 (2pcs) - + 132005500 1000-5000 ±0,080 50, 100 (2pcs), 200, 500, 1000 (3pcs) - + MEASURING OPERATION INSTRUCTIONS Clean the oil from the measuring surfaces of micrometer by cloth. For internal micrometers with range up to 1500mm use Standard gauge to set size on micrometer head. Internal micrometers with range over 2000mm has presetted 1000mm micrometer head on measuring machine. If necessery use measuring machine or high accuracy microemter to check corerect micrometer head setting Combine extention rods to make wide range internal measurings. During measure, thimble should rotate only by ratchet. Ensure contact of workpiece with measuring surfaces of the micrometer so tightly to ratchet cranked 2-3 times. Try to prevent warping measuring surfaces. After work the measuring surfaces of the micrometer wipe with a cloth and apply anticorrosive oil. WARNING ! - Do not make the rotation of the micrometer screw in close measuring surfaces using a thimble. - Avoid shocks or falling, even with a small height. - Do not disassemble or adjust the micrometer persons who unrelated to the repair. MICROMETER HEAD ranges up to 1500mm INSTRUMENT FIGURE * design of 600mm version Change without prior notice * design of 2000mm version Edition: M1018_0818Adobe PDF Library 15.0 Adobe InDesign CC 13.1 (Macintosh)