User Manual for HDWR models including: AC400, AC400 RFID Access Control Reader, RFID Access Control Reader, Access Control Reader, Control Reader
User Manual RFID Access Control Reader SecureEntry-AC400 Table of contents Specifications: ............................................................................................................................................................... 3 Set contents: ................................................................................................................................................................... 4 Features: ............................................................................................................................................................................ 4 Connection diagram................................................................................................................................................ 5 Output format and backlight setting for the keyboard .................................................................. 5 Setting the output format for the reader................................................................................................... 6 2 Specifications: · Warranty: 1 year · Reading Distance: 5-10cm · Device Type: 32 bit ARM · Verification Type: RFID Card, Password · Operating frequency: 125 kHz · Type of cards read: EM · Response Speed: Less than 0.2 seconds · Communication Distance: 100m · Data transfer: real-time · Light signal: built-in LED (bi-color LED) · Beep: Built-in speaker (buzzer) · Audio-visual indication: when the registered card is placed against the reader, the red LED flashes green and a beep sounds · Keyboard and keys: touch keyboard · Resistance: protection against water ingress · Voltage: DC 9V - 16V, standard 12DC · Operating Current: 70mA · Interface: Wiegand 26 output · Operating Temperature: -25º C - 75º C · Operating Humidity: 10%-90% · Product dimensions: 12.3 x 8.4 x 2.3 cm · Package dimensions: 18.5 x 13.9 x 5.5 cm · Product weight: 200 g · Product weight with packaging: 400 g 3 Set contents: · Access Control Reader with Wires · Manual Features: · The reader offers access by reading an RFID card with a frequency of 125 kHz or by means of an individual password. · Made of durable materials and waterproof housing, the device can be mounted outdoors. · The device is perfect for a wide variety of environments, such as companies, institutions, as well as private homes, making it a versatile solution for a wide range of users. · The reader is equipped with a two-color LED and an audible signal that informs about the authorization status, making it easier for users to understand the current access status · Thanks to the Wiegand 26 Output interface, the reader can be connected to external devices to form an access control system. 4 Connection diagram Lp. Designation Colour 1 12V red 2 GND black 3 D0 4 D1 5 BEEP 6 LED Green White Yellow brown Function DC12V Input GND Power Supply Port D0 WG Port D1 WG Beep Light signal Connection description Connecting 12V Host Intercom or Power Supply GND connection of the intercom host or power supply Connecting Data0 to the controller Connecting Data1 to the controller Beep when connected to GND Green light when connecting to GND Output format and backlight setting for the keyboard Step 1. Entering setting mode (in standby mode, press and hold the # button for 5 seconds while the green LED is flashing) Step 2. Enter the code to get the corresponding command (826 and 803 as the factory value) 826 (WG26 output format) / 834 (WG34 output format) 5 801(Backlight normally on) / 802(Backlight normally off) / 803(Backlight on for 15 seconds) Step 3. It will automatically exit the setting mode with a long beep if the data has been entered correctly. It will remain in the setting mode waiting for data to be re-entered with a short, triple-beep beep if incorrect data has been entered. Note: Press the * button to exit the setting mode at any time. Setting the output format for the reader 6Microsoft Word 2019