uartBridge user manual
Updated February 16, 2021
uartBridge -- is the module for integration with third-party wireless security and smart home systems. A wireless network of smart and secure Ajax detectors can be added to a thirdparty security or smart home system through the UART interface.
Connection to Ajax hubs is not supported.
Buy uartBridge Supported sensors:
MotionProtect (MotionProtect Plus) DoorProtect
SpaceControl GlassProtect CombiProtect FireProtect (FireProtect Plus) LeaksProtect
Integration with third-party detectors is implemented at protocol level.
uartBridge communication protocol
Tech specs
Communication interface with central unit
Use
Radio signal power
Communication protocol The maximum distance between a wireless detector and uartBridge receiver
Maximum number of connected devices
Detection of jamming Software update Detector performance monitoring Power supply voltage
Operating temperature range Operating humidity
Dimensions
UART (speed 57,600 Bd)
Indoor 25 mW
Jeweller (868.0-868.6 MHz)
Up to 2,000 m (in open area)
85 Yes Yes Yes DC 5 V (from the UART interface) From -10° to +40° Up to 90% 64 55 13 mm (without antennas)
110 58 13 mm (with antennas)
Jeweller radio technology | Ajax Systems