MÅLA Easel

Product Overview

This document provides assembly instructions for the IKEA MÅLA easel. The MÅLA easel is a wooden stand designed for displaying paper rolls for drawing and creative activities.

Important Safety Information

⚠️WARNING: Adult assembly is required. This product must be assembled by an adult.

Parts Included

Assembly Steps

Step 1

Attach two [Bracket/Connector] parts (128261) to the top of the two side frame pieces using two screws (157725) for each bracket. Ensure the brackets are oriented correctly as shown in the diagram.

Step 2

Attach two [Bracket/Connector] parts (128270) to the top of the two side frame pieces using two screws (157725) for each bracket. These brackets are positioned next to the previously attached ones.

Step 3

Connect the two side frame assemblies. Insert the connecting rods into the corresponding holes on the side frames. Secure these connections using six screws (10048943), two per connection point, with washers.

Step 4

Attach the lower support bars to the side frames. Use four screws (109536) to secure the lower crossbars to the main leg structures.

Step 5

Attach the main frame to the side supports. Insert the side supports into the designated slots on the main frame. You will hear a 'Click!' sound when they are properly seated. This is done on both sides.

Step 6

Secure the lower part of the easel. Insert the lower support pieces and secure them using six screws (10048943) with washers.

Step 7

Fold down the lower support bar to its resting position.

Step 8

Prepare to insert the paper roll. Slide the paper roll onto the rod.

Step 9

Insert the paper roll rod into the easel mechanism. Place the rod into the holders at the top of the easel.

Usage and Warnings

ⓘ The easel is now assembled and ready for use with a paper roll.

?Warning: Do not climb or sit on the easel. It is not designed to support human weight.