Panasonic ET-DLE085 Zoom Lens Operating Instructions

Introduction

Thank you for purchasing this Panasonic product. Please read these operating instructions and the projector operating instructions carefully, and then use this product correctly.

Before using this product, be sure to read "Read this first!" (See Page 2).

Please save this manual for future use.

Product information (for Turkey only): EEE Yönetmeliğine Uygundur. EEE Complies with Directive of Turkey.

Read this first!

WARNING: Before replacing the zoom lens, be sure to turn the power off and disconnect the power plug from the wall outlet. Otherwise, an electrical shock may result.

CAUTION: Supplied accessories and consumables: Do not open the desiccant bag. Do not eat the contents. (Inadvertently ingesting desiccant could be harmful.) If the desiccant gets into your eyes or mouth, immediately rinse with plenty of water and seek medical attention. Keep desiccant out of the reach of children.

Supplied Accessories

Make sure that the following has been provided:

1 of each

Attaching the Lens / Detaching the Lens

Before replacing the projection lens

Return the projection lens to the home position before replacing or removing it. For details on how to return the lens to the home position, refer to the operating instructions of the projector.

Attention

• Make sure that the projector power supply is switched off before attaching or detaching the projection lens.
• After removing the projection lens, store it safely away from vibration or impacts.
• Do not touch the electric contact points of the projection lens with your fingers. Dust and dirt on the contacts may cause contact malfunctions.
• Remove the lens cap before mounting the zoom lens.
• Do not touch the surface of the lens with bare hands. Finger prints and dirt on the surface of the lens will be magnified by the lens and lower the quality of the projected image. Place the supplied lens cap on the zoom lens when the projector is not in use.
• The lens is made of glass. The lens could be damaged if brought into contact with or rubbed against hard objects. Handle the lens carefully.
• Use a clean, soft and dry cloth to wipe away dust and dirt from the lens. Do not use fluffy cloths containing oil, water or dust for cleaning. The material in the lens is easily damaged so do not apply excessive pressure when wiping it.

Attaching the Lens

1. With the lens mount cover that came with your projector attached, align the positioning guide on the zoom lens with the guide grooves on the projector, and insert the zoom lens fully. There is a red dot at the bottom right end of the positioning guide.
2. Rotate the lens clockwise until you hear a "click".

Note: Gently turn the zoom lens counterclockwise to check that it will not fall out.

Detaching the Lens

1. Turn the lens mount cover counterclockwise to detach it from the lens and slide it towards the front end of the lens.
2. Turn the zoom lens completely counterclockwise while pressing the lens release button to detach the lens.
3. Turn the lens mount cover clockwise to reattach it.

Focus Adjustment Function

The focal balance between the center and periphery of the projected image changes depending on the size of the projected image. The lens is equipped with a focus balance adjustment function for the screen periphery.

Adjusting the Focus

1. Focus the center of the screen by operating the projector unit.
2. Turn the periphery focus ring by hand as shown in the figure to adjust the focus in the periphery of the screen.

Note: The projected image sizes and scale shown on the periphery focus adjustment ring are an approximate guide. For details on the projection distance, see the projector specifications (https://eww.pavc.panasonic.co.jp/projector/extranet/main/spec/index.html).

Specifications the Lens

Note: As for projection distance, please refer to the operating instructions of the projector.

Manufacturer and Importer Information

This section lists the manufacturer and importer information in various languages, including English, French, Spanish, German, Italian, Bulgarian, Czech, Danish, Estonian, Greek, Croatian, Hungarian, Lithuanian, Latvian, Dutch, Norwegian, Polish, Portuguese, Romanian, Slovak, Slovenian, Swedish, Turkish, and Finnish.

Manufactured by: Panasonic Connect Co., Ltd., 4-1-62 Minoshima, Hakata-ku, Fukuoka 812-8531, Japan

Importer: Panasonic Connect Europe GmbH

Authorized Representative in EU: Panasonic Testing Centre, Winsbergring 15, 22525 Hamburg, Germany

Importer for UK: Panasonic Connect UK, a branch of Panasonic Connect Europe GmbH, Maxis 2, Western Road, Bracknell, Berkshire, RG12 1RT

Disposal of Old Equipment

Only for European Union and countries with recycling systems.

This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products must not be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please take them to applicable collection points in accordance with your national legislation.

By disposing of them correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment.

For more information about collection and recycling, please contact your local authority. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

Company Information

Panasonic Connect Co., Ltd.

Web Site: https://panasonic.net/cns/projector/

© Panasonic Connect Co., Ltd. 2022