Cellularline DOT Wireless Headset
Model Numbers: BTDOTTWSK, BTDOTTWSW
Product Overview
The Cellularline DOT Wireless Headset offers a compact and convenient audio experience with true wireless technology. Featuring Bluetooth 5.3 connectivity, these earbuds provide freedom of movement and high-quality sound for music and calls.
Getting Started & Usage
The following steps guide you through using your DOT Wireless Headset:
Charging the Device
Earbuds: Place the left (L) and right (R) earbuds into the charging case. The LED indicators on the earbuds will show their charging status (typically RED/BLUE while charging, turning off or BLUE when fully charged). The charging case itself can be charged via its USB-C ? port.
Charging Case: Connect a USB-C cable to the charging case and a power source. The case's battery level can be monitored, indicated from 0% to 100% ?.
Pairing and Connection
1. Open the charging case with the earbuds inside. The earbuds will automatically enter pairing mode, indicated by flashing RED/BLUE LEDs.
2. On your smartphone or other Bluetooth-enabled device, navigate to Bluetooth settings.
3. Select "DOT" or "Cellularline DOT" from the list of available devices to connect.
4. Once connected, the LED indicators will typically turn solid BLUE or turn off.
Touch Controls
The earbuds feature intuitive touch controls:
- Play/Pause Music: Single tap the touch area on either earbud. ▶️
- Next Track: Double tap the touch area on the right earbud. ⏭️
- Previous Track: Double tap the touch area on the left earbud. ⏮️
- Activate Voice Assistant: Press and hold the touch area on either earbud for 2 seconds. ?️
- Answer/End Call: Single tap the touch area on either earbud.
- Reject Call: Press and hold the touch area on either earbud for 2 seconds.
Resetting the Earbuds
If experiencing connectivity issues, place both earbuds in the charging case, close the lid, and press the reset button (often located on the back or bottom of the case) for approximately 10 seconds. Then, re-pair the earbuds with your device.
Technical Specifications
Feature | Specification |
---|---|
Bluetooth Version | v5.3 |
Supported Profiles | Headset, Handsfree, A2DP, AVRCP |
Range | 10m |
Bluetooth Frequency Range | 2.402MHz-2.480MHz |
Earbud Battery Voltage | 3.7V |
Earbud Battery Capacity | 40mAh x 2 |
Charging Case Battery Capacity | 250mAh |
USB-C Port Voltage | 5V |
USB-C Port Current | 0.5A |
Maximum EIRP | 4.77 dBm |
Stand-by Time | 150 hrs |
Talk Time | Approx. 4.5 hrs |
Play Time | Approx. 7 hrs |
Earbud Charging Time | Approx. 1.5 hours |
Charging Case Charging Time | Approx. 2 hours |
Weight | 32g |
Safety and Warnings
Please read the following safety information carefully:
- Medical Devices: Use of this device may interfere with the proper functioning of medical devices such as pacemakers. Consult your doctor before use if you have a medical device.
- Hearing Protection: Prolonged exposure to high volume levels can cause permanent hearing damage. Use at a moderate volume.
- Situational Awareness: Do not use the device in situations where it is critical to hear ambient sounds for safety, such as at railway crossings or on train platforms.
- Driving Safety: If using the device while driving, comply with all applicable local regulations.
- Children: Supervise children when they use the device. Keep accessories and packaging out of their reach.
- Environmental Conditions: Avoid exposing the device to moisture, dust, steam, direct sunlight, and extreme temperatures (too high or too low), as this may cause malfunctions.
- Charging: Use only approved chargers. Charge the product regularly, at least once every 3 months.
Disposal Information
This symbol ♻️ indicates that the product must not be disposed of with other household waste at the end of its life. To prevent potential harm to the environment or health from improper waste disposal, separate this product from other waste types and recycle it responsibly to promote the sustainable reuse of material resources. Contact your local dealer or government office for information on separate waste collection and recycling. The device contains a non-replaceable battery. Do not attempt to open the device to remove the battery. Contact local waste disposal authorities for battery removal when disposing of the product.
For more information, visit: http://www.cellularline.com
Compliance Information
Cellularline S.p.A. declares that this Bluetooth headset complies with Directive 2014/53/EU. The full text of the declaration of conformity is available at: https://www.cellularline.com/en/dichiarazione-conformita
This product also complies with Directive 2011/65/EU updated by 2015/863/EU.
Warranty Information
This product is covered by a statutory warranty against conformity defects in accordance with applicable national consumer protection laws.
For more information, please see: https://www.cellularline.com/en/garanzia-legale