STÙNICK SB1 Automatic Ultrasonic Bark Control Device

Scenarios & Suitability

• Suitable for dogs over 6 months old and under 8 years old.
• Audio mode can be used for dogs with hearing defects or loss of hearing.
• Not suitable for aggressive, bad-tempered dogs.
• Caution: During use, keep ears away from the device.

Technical Specifications

FCC ID: 2AOSL-SB1

Brand Name: STÙNICK

Model Number: SB1

Product Dimensions: 5.9*4.33*1.38 inch

Operating Range: 75 ft (maximum effective range); 350 ft with remote

Battery: 2000mAh Lithium Battery

Charging: Input 5VDC/0.5A

Remote Battery: CR2025

FCC Caution Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

What's In The Package?

• SB1 Anti Barking Device
• SB1 Remote Control
• SB1 USB-C Cable with Charger Adapter
• SB1 USB-C Long 60 Feet Cable (Included only for the Neighbor Pack)
• SB1 Mounting Bracket with Pan & Tilt (Included only for the Neighbor Pack)

Customer Support

Please note results may vary. Like people, all dogs have different temperaments. On average, there are about ~3% of dogs that do not respond to the device. If this is the case for your dog, please get in touch with STÙNICK before opening a return request.

Email: support@stunick.com

STÙNICK aims to resolve issues to ensure customer satisfaction, offering refunds if necessary without requiring the unit to be shipped back.

For more details on the manual, please visit: www.stunick.com

Components

The STÙNICK SB1 device includes:

• LED Light Indicator: Provides status feedback.
• Audible Speaker: Emits sound signals.
• Microphone: Detects barking.
• Ultrasonic Sound Emitter: Emits ultrasonic sound.
• Power Port: For charging the device.
• Hanging Hole: For attaching a hanging rope.
• Bark Sensitivity Dial: Adjusts sensitivity to barking. Features 'ULTRA' mode and 'AUDIO' mode.
• Work Mode Dial: Selects operational mode.
• Remote Control: For manual activation and control.

Quick Operating Instruction

1. Placement: Select a location for the device approximately 5 ft from the ground and 75 ft from the dog's primary activity area. Ensure there are no significant obstacles between the dog and the device.
2. Test Mode (Audit Mode): Switch to 'AUDIO' mode first. You will hear a sound each time the device activates in response to barking. This helps confirm it is working.
3. Sensitivity Adjustment: Adjust the Bark Sensitivity Dial based on the dog's distance:
   • For dogs approximately 25 ft away, set the dial to about 1/3 of the way up.
   • For dogs approximately 50 ft away, set the dial to about 1/2 of the way up.
   • For dogs approximately 75 ft away, set the dial almost all the way up.
4. Training Mode (Ultra Mode): Once the sensitivity is set correctly and the device is working as expected, switch to 'ULTRA' mode for ultrasonic training.
5. Remote Operation: The remote can activate the device from over 75 ft away, with ultrasonic sound traveling up to 350 ft in an unobstructed line of sight. Ensure the remote is within approximately 75 ft of the device for activation. To use the remote exclusively for training, adjust the sensitivity dial all the way down. Note: The main device must be turned on before using the remote. The remote can also be used to train unwanted behaviors by adjusting the dial all the way down so the device only activates via remote command.

LED Indicator

Accessory Mounting Bracket

The included Mounting Bracket with Pan & Tilt allows for a full 45° angle of tilt, enabling precise positioning of the device. This ensures the ultrasonic sound can be directed effectively towards the dog's activity area.

How to Install

Attach the mounting bracket to a suitable surface. Then, mount the STÙNICK SB1 device onto the bracket. The bracket's adjustable nature allows you to set the optimal angle (up to 45°) for coverage.