AQ171 User Manual

Product Overview

Thank you for purchasing the AQQA New Generation Cooling Fan. This product allows your aquatic life to have a more comfortable environment in the hot summer.

Product Diagram

? Note: A three-head fan includes a splitter while a single-head fan does not include it.

Components include:

• Fan
• Splitter (for three-head models)
• Timing governor
• Power adapter
• User manual

Product Features

• Easy to Install: Features an adjustable knob for easy installation and movement, suitable for fish tanks with a maximum thickness of 15mm.
• Adjustable: Offers 5 adjustable wind speeds, adjustable wind direction, and 5 timer periods.
• Safety: Operates on 12V voltage, ensuring fan safety and safe insulation material wiring.
• Quiet and Energy-saving: Designed for fresh and saltwater aquariums, it is significantly quieter than regular fans.
• High-quality Product: Features a unique timer/wind speed setting function. The housing is made of sturdy and beautiful ABS plastic, and it utilizes a full-copper motor and FDB bearings for a comfortable wind experience.

Product Specifications

Instructions

1. Controller Operation

The controller allows adjustment of fan speed and timer settings.

Speed Indicator: Can be adjusted in 1-5 gears for air volume.

Time Indicator: Can be timed in 0.5H, 1H, 2H, 4H, 12H periods.

Buttons: Speed/On/Off Button, Time Button.

Operation Steps:

1. Plug in the power adapter. Press the "ON/OFF" button (also the speed button) on the controller; the 1st gear indicator will light up. Note: Speed settings and ON/OFF functions share the same button.
2. Press the "Time" button on the right side of the controller to select the desired time period. There are five options. When the setting is complete, the corresponding indicator light will illuminate.
3. Press the "Speed" button on the left side of the controller to select the desired wind speed. There are 5 options, and the indicator light will be on when the setting is completed.

2. Assembling The Cooling Fan

1. Fix the fan on the aquarium wall as shown. [Description of image: Fan attached to the edge of an aquarium tank.]
2. Plug the governor end into the fan side wiring position as shown. [Description of image: Fan connected to the timing governor via a cable.]
3. Note: For a three-head version, connect the power splitter with the fan, and the other end of the splitter to the governor. Use the female connectors of the fan cable to connect the three male connectors of the splitter in turn. These two connectors join together. [Description of image: Close-up of three male connectors from a splitter and a female connector from a fan cable.]
4. Power on the power adapter. [Description of image: Power adapter plugged into a wall socket.]
5. Power on the power adapter. [Description of image: Power adapter plugged into a power strip.]

Attentions and Warnings

• ✔️ Please read this user manual carefully before using and follow it strictly.
• ✔️ Please keep the power supply away from water since it is not waterproof.
• ✔️ Please keep the cooling fan away from flammable items to avoid accidents.
• ✔️ Please unplug the power and contact the seller if the cooling fan is not working properly. OPENING WILL VOID WARRANTY
• ✔️ Please unplug the power before maintenance.
• ✔️ Please mind that the operating temperature range for the cooling fan is between 40°F~95°F (4°C~35°C).

6. WARNING

To avoid possible electric shock, do not immerse the switch in water. If the switch falls into the water or becomes wet, do not touch it until you have unplugged it. Basic safety precautions:

1. Read and follow this user manual strictly.
2. DANGER: To avoid possible electric shock, special care should be taken since water is employed in the use of aquarium equipment. For any of the following situations, do not attempt to repair yourself. Instead, return the cooling fan to an authorized service facility for maintenance or discard it.
   • A. If the appliance falls into the water, DO NOT touch it. First unplug it, then retrieve it. If electrical components of the appliance get wet, unplug it immediately.
   • B. Carefully examine the filter after installation. It should not be plugged in if there is water on parts that are not intended to be wet.
   • C. Do not operate the cooling fan if it has a damaged cord or plug, is malfunctioning, dropped, or damaged in any manner. The power cord of this cooling fan cannot be replaced. If the cord is damaged, the cooling fan should be discarded.
   • D. To avoid the possibility of the cooling fan plug getting wet, position the aquarium and its stand to one side of a wall mounted outlet to prevent water from dripping onto the outlet or plug. A "drip loop" should be arranged for each cord, which connects the cooling fan to the outlet. If an extension cord is used, the "drip loop" is the part of the cord below the level of the outlet or the connector that prevents water from traveling along the cord and coming in contact with the outlet. If the plug or outlet does get wet, DO NOT unplug the cord. Disconnect the fuse to the circuit breaker that supplies power to the cooling fan. Then, unplug and examine for the presence of water in the outlet. If you are not sure, consult a certified electrician. [Diagram description: POWER CORD and DRIP LOOP illustration showing how a drip loop prevents water from reaching the electrical outlet.]
3. Close supervision is necessary when the cooling fan is used near children.
4. This cooling fan is not allowed to be used by persons (including children) with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the cooling fan by a person responsible for their safety.
5. To avoid injury, do not contact moving or hot parts.
6. Always unplug the cooling fan from the outlet when not in use, before putting on or taking off parts, maintenance, or placing hands in the water. Never yank the cord to pull the plug from the outlet. Grasp the plug and pull to disconnect.
7. Do not use the cooling fan for other than intended use. The use of attachments not recommended or sold by the appliance manufacturer may cause an unsafe condition and will void the warranty.

• 8. Do not install or store the cooling fan where it will be exposed to extreme weather or temperatures below freezing.
• 9. Make sure the cooling fan is securely installed before operating it.
• 10. Read and observe all the important notices on the cooling fan.
• 11. If an extension cord is necessary, a cord with a proper rating should be used, such as rated amperes or watts. A cord rated for fewer amperes or watts than the cooling fan rating may overheat. Care should be taken to arrange the cord so that it will not be tripped over or pulled.
• 12. The cooling fan is intended FOR HOUSEHOLD USE ONLY.
• 13. SAVE THIS USER MANUAL.

AQQA Limited Manufacturer's Warranty

AQQA offers a manufacturer warranty of 2 years from the date of sale for products purchased from an AQQA®-authorised specialist dealer.

Retain your receipt for any future warranty claim. Conditions apply. Products are guaranteed by AQQA® Aquatic Supplies to the original purchaser against defective material and workmanship under normal use for a period up to 2 years from the date of the original purchase through an Authorized Dealer. Refer to the User Manual included with your product for specific warranty details.

Products have no warranty if:

• (1.) The product has been serviced, modified or tampered with by anyone other than AQQA® Aquatic Supplies.
• (2.) The product has been abused or damaged (including broken or cracked bulbs), and/or.
• (3.) The product has been transported without proper packaging.
• (4.) The product was purchased from an Unauthorized Reseller.

WARRANTY LIABILITY DISCLAIMER:

In no event will AQQA® be liable for any consequential or incidental damages, including but not limited to, lost aquatic life, personal injury, property damage, equipment damage, lost profits, lost wages, lost savings, lost income, etc., arising out of the use of any AQQA® products.

1.0 Terms and Conditions of Warranty.

• AQQA® warrants to the purchaser, for 2 years from date of original purchase through an Authorized AQQA® Reseller, free to repair or replace parts where fault is found due to defective materials or faulty workmanship and where goods do not operate in accordance with the instructions.
• All claims for repair or replacement must be made at place of purchase.
• Only the direct purchaser is entitled to warranty claims against AQQA®, and these are not transferable without AQQA®'s consent.
• The original and dated Proof of Purchase (receipt) must be supplied with all goods claims. Please also provide this Guarantee where possible.
• Wear parts (e.g.: seals, suction devices, axes, pump wheels, light sources, pH electrodes, filter media, such as filter cartridges, as well as UVC burners), glass damage and the opening of the product, as well as structural changes or the use of non-AQQA® original parts are excluded from the guarantee.
• All goods subject to claim under Guarantee should be prepared for transportation in the original packaging or other comparable packaging which offers the same degree of protection, and AQQA® must incur no costs from the shipment.
• Where claims on inspection reveal goods are in normal working order, AQQA® will request reimbursement of all reasonable costs incurred.
• Warranty claims do not exist in the case of only insignificant deviations from the agreed or customary condition or usability, e.g. insignificant deviations in colour, dimensions and/or quality or performance characteristics of the products.
• Our warranty obligation extends only to the delivery of newly manufactured products. Unless otherwise agreed, used products are sold as seen, excluding any warranty.

8. Disposal

Do not dispose of this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary. This product has to be disposed of at an authorized place for the recycling of electrical and electronic appliances rather than being disposed of together with domestic waste. Collecting and recycling waste is a way of saving natural resources. So, please consult with your local seller to make sure the product is disposed of in an environmentally friendly way. [Disposal symbol: crossed-out bin] ♻️

9. Packing List

• Fan
• 1x Power adapter
• 1x Timing governor
• 1x User manual

10. Contact Information

Company Name: Shenzhen Aiku Pet Technology Co., Ltd

Address: Room 501, No.20, Lane 1, Lishipai, Dafapu Community, Bantian Street, Longgang District, Shenzhen Guangdong. 518000

Email: service@aqqapet.com

Website: http://www.aqqapet.com

Follow us: f ? ▶️ @AQQA Aquarium

Regulatory Information

EC REP: Company Name: E-CrossStu GmbH, Address: Mainzer Landstr.69, Frankfurt am Main, Hessen, 60329, Email: E-CrossStu@web.de, Tel: +49 69332967674

UK REP: Company Name: YH Consulting Limited, Address: C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, London, TW18 4AX, Email: H2YHUK@gmail.com, Tel: +44 07514-677868

Certifications: CE, UKCA. Origin: MADE IN CHINA.

[Recycling symbol] [WEEE symbol] [General safety symbol]