Product Environmental Attributes - Computers and Computer Monitors
This declaration outlines the environmental attributes of Dynabook computers and computer monitors, based on ECMA-370 standards. It is published when all mandatory fields are completed. Additional information can be found under section P15.
Company Declaration
| Company Name | Dynabook Europe GmbH |
|---|---|
| Contact Information | Stresemannallee 4b, 41460 Neuss |
| E-mail Address | |
| Internet Site | http://emea.dynabook.com/generic/environmental-management/ |
| Additional Information |
The company declares, based on product specification or test results, that the product conforms to the statements given in this declaration.
Product Details
| Type of Product | Notebook Computer |
|---|---|
| Commercial Name | dynabook PORTEGE X30L-G |
| Model Number | PUZ20E, PUZ21E, PUZ22E, PUZ23E |
| Issue Date | 2020-January-29 |
| Intended Market | Global, Europe, Asia, Pacific & Japan, Americas, Other |
This is an uncontrolled copy. Please refer to the contact information for the latest version.
About Annex B2
Annex B2 reflects Product environmental attributes relevant for Computers and Computer Monitors. The following items from the ECMA-370 Main body are not shown in this template:
- P4.1-P4.3 Consumable materials
- P9.1 TEC and Print speed
- P10.2 - P10.3 Chemical emissions from printing products
- P11.1-P11.3 Consumable materials for printing products.
Product Environmental Attributes - Legal Requirements
| Item | Requirement Met |
|---|---|
| P1 Hazardous substances and preparations | |
| P1.1* Products do comply with current European RoHS Directive. | ✔️ |
| P1.2* Products do not contain Asbestos. | ✔️ |
| P1.3* Products do not contain Ozone Depleting Substances (CFC, HCFC, Halons, etc.). | ✔️ |
| P1.4* Products do not contain more than 0.005% polychlorinated biphenyl (PCB) or 0.005% polychlorinated terphenyl (PCT) in preparations. | ✔️ |
| P1.5* Products do not contain more than 0.1% short chain chloroparaffins (SCCP). | ✔️ |
| P1.6* Parts with direct and prolonged skin contact do not release nickel above 0.5 µg/cm²/week. | ✔️ |
| P1.7* REACH Article 33 information about substances in articles is available at: http://emea.dynabook.com/generic/environmental-management/ | ✔️ |
| P2 Batteries | |
| P2.1* If the product contains a battery, it is labeled with the disposal symbol and proper disposal information is provided. | ✔️ |
| P2.2* Batteries or accumulators do not contain more than 0.0005% of mercury or 0.002% of cadmium. | ✔️ |
| P2.3* Batteries and accumulators are readily removable. | ✔️ |
| P3 Conformity verification & Eco design (ErP) | |
| P3.1* The product is CE-marked to show conformance with applicable legal requirements. Declaration of Conformity available at: http://emea.dynabook.com/generic/product-conformity | ✔️ |
| P3.2* The product complies with the Eco design requirements for energy-related products. Required information is available at: http://emea.dynabook.com/generic/environmental-management/ | ✔️ |
| P5 Product packaging | |
| P5.1* Packaging and packaging components do not contain more than 0.01% lead, mercury, cadmium and hexavalent chromium combined. | ✔️ |
| P5.2* Packaging materials are marked with abbreviations and numbers indicating the nature of the material(s) used. | ✔️ |
| P5.3* Product packaging material is free from ozone depleting substances as specified in the Montreal Protocol. | ✔️ |
| P6 Treatment information | |
| P6.1* Information for recyclers/treatment facilities is available. | ✔️ |
Product Environmental Attributes - Market Requirements
Environmental conscious design
| Item | Description | Requirement Met | ||
|---|---|---|---|---|
| P7 Design | ||||
| P7.1* | Parts that have to be treated separately are easily separable. | ✔️ | ||
| P7.2* | Plastic materials in covers/housing have no surface coating. | ✔️ | ||
| P7.3* | Plastic parts > 100 g consist of one material or of easily separable materials. | ✔️ | ||
| P7.4* | Plastic parts > 25 g have material codes according to ISO 11469 referring ISO 1043-4. | ✔️ | ||
| P7.5 | Plastic parts are free from metal inlays or have inlays that can be removed with commonly available tools. | ✔️ | ||
| P7.6* | Labels are easily separable. | ✔️ | ||
| Product lifetime | ||||
| P7.7* | Upgrading can be done e.g. with processor, memory, cards or drives. | ✔️ | ||
| P7.8* | Upgrading can be done using commonly available tools. | ✔️ | ||
| P7.9. | Spare parts are available after end of production for: 5 years. | |||
| P7.10 | Service is available after end of production for: See P15. | |||
| Material and substance requirements | ||||
| P7.11* | Product cover/housing material type: Mg, PC+ABS. | |||
| P7.12 | Insulation materials of external electrical cables are PVC free. | ✔️ | ||
| P7.13 | Insulation materials of internal electrical cables are PVC free. | ✔️ | ||
| P7.14 | External plastic casing/cover parts > 25 g contain no more than 0.1% bromine and 0.1% chlorine attributable to brominated/chlorinated flame retardants or PVC, or 0.3% bromine and 0.3% chlorine in parts with > 25% post-consumer recycled content. | ✔️ | ||
| P7.15 | Printed circuit boards (PCBs) > 25 g are low halogen (as defined in IEC 61249-2-21). | ✔️ | ||
| P7.16 | Flame retarded plastic parts > 25 g in covers/housings are marked according ISO 1043-4. | |||
| P7.17 | Chemical specifications of flame retardants in printed circuit boards > 25 g: TBBPA (additive), TBBPA (reactive). | |||
| P7.18 | Flame retarded plastic parts > 25 g contain flame retardant substances/preparations above 0.1%. | |||
| P7.19 | Chemical specifications of flame retardants in plastic parts > 25 g: Risk phrases and Hazard statements are assigned. | |||
| P7.20 Postconsumer recycled plastic material content | ||||
| Of total plastic parts' weight > 25 g, the postconsumer recycled plastic material content is 2.24%. | ✔️ | |||
| P7.21 Biobased plastic material content | ||||
| Of total plastic parts' weight > 25 g, the biobased plastic material content is %. | ||||
| P7.22* | Light sources are free from mercury (less than 0.1 mg/lamp). | ✔️ | ||
| P8 Batteries | ||||
| P8.1* | Battery chemical composition: Main battery: Li-ion. | |||
| P9 Energy consumption | ||||
| P9.1 | Energy consumption levels for various modes (100V AC / 115V AC / 230V AC): | |||
| Energy Mode | Power (W) @ 100V AC | Power (W) @ 115V AC | Power (W) @ 230V AC | Reference/Standard |
| EPS No-load | 0.068 | 0.1028 | EN 50563 | |
| PTEC *Typical Energy Consumption | AS/NZS 5813.1:2012 and AS/NZS 5813.2:2012 | |||
| Standby level (off mode) power | 0.34 W | AS/NZS 5813.1:2012 and AS/NZS 5813.2:2012 | ||
| Sleep mode power | 0.69 W | AS/NZS 5813.1:2012 and AS/NZS 5813.2:2012 | ||
| Long idle mode power | 2.22 W | AS/NZS 5813.1:2012 and AS/NZS 5813.2:2012 | ||
| Short idle mode power | 5.79 W | AS/NZS 5813.1:2012 and AS/NZS 5813.2:2012 | ||
| TEC calculated | 8.23 kWh | AS/NZS 5813.1:2012 and AS/NZS 5813.2:2012 | ||
| Power_in_Off | Category2: 0.3 W | ENERGY STAR® Program Requirements for Computers Version 8.0 | ||
| Power_in_Sleep | Category2: 0.7 W | ENERGY STAR® Program Requirements for Computers Version 8.0 | ||
| Power_in_Long_Idle | Category2: 2.2 W | ENERGY STAR® Program Requirements for Computers Version 8.0 | ||
| Power_in_Short_Idle | Category 2: 4 W | ENERGY STAR® Program Requirements for Computers Version 8.0 | ||
| ETEC * Annual Energy Consumption | Category2: 15.2 kWh/year | ENERGY STAR® Program Requirements for Computers Version 8.0 | ||
| External Power Supply Efficiency Level | VI | |||
| P9.2* | Default time to enter energy save mode: 10 (Display off), 15 (Sleep) minutes. Information about the energy save function is provided with the product. | |||
| P9.3 | Energy efficiency class (monitors only): | |||
Emissions
Noise emission
| Mode | Mode Description | Statistical upper limit A-weighted sound power level, LWA,c (B) |
|---|---|---|
| Idle | ISO7779 Idle | 2.5 |
| Operation | ISO7779 Operation-HDD | |
| Other mode | ISO7779 ODD (When ODD operates) | |
| Other mode | When cooling fan operates (Fan max.) | 5.1 |
Measured according to: ISO 7779, ECMA-74.
Electromagnetic emissions
Computer display meets the requirement for low frequency electromagnetic fields of the following voluntary program(s):
- Ergonomics for computing products
| Item | Description |
|---|---|
| P12.1* | The display meets the ergonomic requirements of ISO 9241-307 for visual display technologies. |
| P12.2* | The physical input device meets the requirements of ISO 9995 and ISO 9241-410. |
Packaging and Documentation
| P13.1* | Product packaging material types: Cardboard (0.365 kg), PE (0.016 kg), EPE (0.029 kg). | |
| P13.2* | Product plastic primary packaging is free from PVC. | ✔️ |
| P13.3* | For product primary corrugated fiberboard packaging, the contained percentage of minimum post-consumer recovered fiber content is 86%. | |
| P13.4* | Media for user and product documentation: Electronic, Paper, Other. | ✔️ (Electronic) |
| P13.5 | User and product documentation on paper media is chlorine-free. |
Voluntary Programs
| Program | Criteria Version | Date | Product Category |
|---|---|---|---|
| ENERGY STAR® | 8.0 | 6-Jan-2020 | 2 |
| Eco-label: | |||
| Eco-label: |
Additional Information
P15: Service period depends on service agreement.
P7.10: Service availability after end of production is detailed in P15.
P9: Energy Efficiency information published on The Eco Declaration represents only the characteristic of a model with standard configuration meeting ENERGY STAR® specifications. Use of different configurations or optional devices changes the energy efficiency.
P10: Acoustic noise information published on The Eco Declaration represents the characteristics of a model with standard configuration. Characteristics of models with different configurations may vary.
P7.19: The definition of plastic parts in this item does not include cables in harmonization with TCO. AC cable commonly includes R40 substances.
Information contained in this document is approximate and provided for informational purposes only. Dynabook provides this information without warranties of any kind neither expressed nor implied. Dynabook does not warrant that the content will be error free. All information is provided to the best of Dynabook's knowledge at the time of completion, and Dynabook has no obligation to update such information.
Legal References Europe Annex B2
| Reference | Declaration Item |
|---|---|
| Directive 2011/65/EU (RoHS Directive) | P1.1, P3.1 |
| Regulation (EC) 1907/2006 (REACH Regulation), annex XVII | P1.2, P1.4, P1.6, P1.7 |
| Regulation (EC) 2037/2000, 2038/2000, 2039/2000 (Marketing and use of Ozone layer depleting substances) | P1.3, P5.3 |
| Norwegian regulation relating to restrictions on the use of certain dangerous chemicals 20.12.2002 | P1.5 |
| Directive 2006/66/EC (Battery and accumulators Directive), as amended. | P2.1, P2.2, P2.3, P8.1 |
| Directive 2014/35/EU (Low Voltage Directive) | P3.1 |
| Directive 2014/30/EU (EMC Directive) | P3.1 |
| Directive 2014/53/EU (RE Directive) | P3.1 |
| Regulation (EC) 801/2013 amending Regulation (EC) No 1275/2008 with regard to ecodesign requirements for standby, off mode electric power consumption of electrical and electronic household and office equipment, and amending Regulation (EC) No 642/2009 with regard to ecodesign requirements for televisions | P3.1, P3.2 |
| COMMISSION REGULATION (EU) No 617/2013 of 26 June 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for computers and computer servers | P2.4, P2.5 |
| Regulation (EC) No 1272/2008 (CLP Regulation) | P7.19 |
| Directive 2004/12/EC (Packaging Directive) | P5.1 |
| Decision 97/129/EC (Secondary packaging legislation) | P5.2 |
| Directive 2012/19/EU (WEEE directive) | P6.1 |
