Instruction Manual for THE SOURCE models including: 8087234, LED Curtain String Lights

www.thesource.ca › download › ENLED CURTAIN STRING LIGHTS 8087234 Instruction Manual

• Instruction manual FEATURES • 2m (6.5ft.) string length and 2m (6.5ft.) string width • 200 LED lights • 8 light modes ... 7/22/2021 4:04:42 PM ...

LED CURTAIN STRING LIGHTS 8087234 Instruction …

OPERATING INSTRUCTIONS BATTERY POWERED 1. Open the battery cover. 2. Install 3 AA batteries (sold separately) following the polarity markings. DO NOT mix old and new batteries. DO NOT mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. 3. Close the battery cover and switch the battery box ON. 4.

LED CURTAIN STRING LIGHTS - Instruction Manual - The ...

OPERATING INSTRUCTIONS. BATTERY POWERED. 1. Open the battery cover. 2. Install 3 AA batteries (sold separately) following the polarity markings.

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • References

File Info : application/pdf, 1 Pages, 23.16KB

LED CURTAIN STRING LIGHTS
Instruction Manual

8087234

INCLUDED · LED curtain lights · USB cable · Instruction manual
FEATURES · 2m (6.5ft.) string length and 2m (6.5ft.) string width · 200 LED lights · 8 light modes
OPERATING INSTRUCTIONS
BATTERY POWERED 1. Open the battery cover. 2. Install 3 AA batteries (sold separately) following the polarity markings.
DO NOT mix old and new batteries. DO NOT mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. 3. Close the battery cover and switch the battery box ON. 4. Press the button to switch between light modes: 1­Combination 2­Waves 3­Sequential 4­Slow glow 5­Running water 6­Slow fade 7­Twinkling 8­Solid ON 9­OFF

WARNINGS:
· DO NOT use if product is damaged · DO NOT expose to direct heat, flame or immerse in water · DO NOT attempt to power any further string lights from this product · DO NOT attempt to remove bulbs, LED bulbs cannot be replaced · DO NOT attempt to power with an extension cord · Fully unwind lights and uncoil the cable before turning ON · Remove batteries when not in use and should be removed and
replaced by adults only · Protect product from sharp or potentially damaging objects to avoid
damage to the wire's insulation

USB CONNECTED
1. Connect micro USB cable to battery box. 2. Connect the USB cable to a wall charger (sold separately)
or alternative power source. 3. Turn the light ON. 4. Press the button to switch between light modes:
1­Combination 2­Waves 3­Sequential 4­Slow glow 5­Running water 6­Slow fade 7­Twinkling 8­Solid ON 9­OFF

SPECIFICATIONS:
Length: Width: LED Quantity: Wire Material: Battery: Working Temperatures:

2m (6.5ft.) 2m (6.5ft.) 200 LEDs PVC + copper wire 3 AA batteries (sold separately) -30 to 60 °C

THE SOURCE - WARRANTY

The Source warrants that this product will be free from defects in materials and workmanship for a period of 6 months from the date of purchase. Within this period, simply take the product and your proof of purchase to any The Source store or participating dealer and the product will be replaced (where available) without charge. Any product which has been subject to misuse or accidental damage is excluded from this warranty. This warranty is only applicable to a product purchased through The Source company-owned stores or participating dealers in Canada where the warranty is included with the product. While this warranty does not confer any legal rights other than those set out above, you may have additional statutory rights which will vary under the laws of the various countries, states, provinces and other governmental entities in which The Source operates. This warranty is subject to all statutory rights you may have in Canada.

Imported by: The Source, Barrie, Ontario, Canada, L4M 4W5 Manufactured in China www.thesource.ca © 2022 The Source. All rights reserved.

Please Recycle



References