Operating Instructions for L8 Smart Sport Watch

Appearance Description

The smartwatch features a short watchband, a green light sensor, a thimble for charging, and a long watchband. The main controls include an encoder for entering the main menu or contacts, and a one-touch return button.

Charging Schematic:

Use the product-specific magnetic charging cable. Align the magnetic charging contacts on the back of the watch with the cable. Do not use power adapters exceeding 5V and 1A output. Activate the watch by charging for about 5 minutes if the battery is depleted.

Introduction to Watch Functions

• Bluetooth Call BT Switch: Short press to toggle Bluetooth call functionality.
• Brightness Adjustment: Adjust screen brightness.
• Mute Switch: Toggle mute on/off.
• Battery Percentage: Displays the current battery level.
• Do Not Disturb Mode: Activate or deactivate do not disturb mode.
• Wrist Lift Screen Switch: Turn the screen on by lifting the wrist.
• Find Cell Phone: Locate your connected phone.
• Password: Set or enter a password.
• Stopwatch: Start, pause, or reset timing. Slide right to exit.
• Alarm Clock: Set up to eight alarms.
• More: Access additional functions.

Main Interface and Features

Main Interface: Displays current time, date, steps, and other information. Long press the main screen to switch watch faces. Swipe right for the split-screen menu.

Steps: Shows current steps, distance, and calories burned.

Watch Audio Switch: Turn the watch call and multimedia sound playback functions on or off.

Heart Rate: Automatically measures real-time dynamic heart rate. Connect to the APP for continuous monitoring and data records.

Blood Oxygen: Measures blood oxygen data. Connect to the APP for timed monitoring and data records.

Weather: Displays local weather. Requires APP connection, phone GPS, positioning permission, and network connection.

Music: Control your phone's music player. Requires the music player to be open and connected to the APP.

Information: Receive notifications from your phone. Requires corresponding function activation and APP connection.

Breathing Training: Select breathing patterns and duration for training.

Voice Assistant: Wake up the voice assistant after connecting the phone via Bluetooth.

Search: Makes your phone beep to help locate it. Requires an active APP connection. No alert in silent mode.

Settings: Access menu style, brightness, factory reset, shutdown, and watch information.

Exercise and Outdoor Features

Exercise: Click the icon to access multiple sport modes. Select a mode, start, and slide right to pause or stop.

Compass: Essential for outdoor exploration to locate yourself and avoid getting lost.

Altitude: Measures and displays real-time altitude, useful for mountaineering and hiking.

Watch APP Installation and Connection Instructions

Most functions require connection to a special APP for normal use (e.g., time display, call/message alerts). For Android phones, do not connect via Bluetooth directly. Scan the QR code or search for 'GloryFit Pro' in app markets to download and install.

Device Connection:

1. Turn on phone Bluetooth and GPS positioning.
2. Open the APP and follow prompts.
3. Click [Select Device] to search.
4. Select 'L8' from the Bluetooth list.
5. Confirm pairing when prompted.

Notes:

• Android users: Ensure the APP has necessary permissions and runs in the background.
• For iOS versions below 13: After connecting in the APP, connect to 'L8' again in the phone's Bluetooth settings for call and multimedia functions.

Precautions

• Do not charge with water stains.
• This product is an electronic monitoring device, not for medical use. Data is for reference only.
• Avoid wearing during hot baths and prolonged swimming.
• Use only the matching charging cable.
• Keep the charging port clean for optimal contact.

FAQ

1. Watch cannot be searched in APP or time synchronization fails.

A. Ensure phone Bluetooth and GPS are on. B. Grant positioning permission to the APP. C. Cancel any existing Bluetooth pairing with the watch and re-search in the APP. D. If the watch has been dormant, turn Bluetooth off and on again on both devices. E. The watch must be connected to the APP for functions like steps and sleep to work correctly.

2. No alert function on the watch.

For first-time use: Android users: Enable notification reminders in the APP and grant APP notification permissions. Apple users: Allow pairing when prompted by the phone after APP connection, enable desired app reminders in the APP, and ensure notification permissions are set in Phone Settings > Notification.

3. Reminder switch is on, but no or sporadic reminders.

Ensure message notifications and permissions are enabled, Bluetooth is on, and the APP and watch are connected. If issues persist, re-check message push functions and system authorization for the APP.

4. Android phone Bluetooth disconnects or loses message alerts.

Android systems may clean up background applications. Ensure the APP is set to run in the background (e.g., Huawei: Settings > Battery > Power Consumption Ranking > APP > Application Launch Management > Manually manage backstage running).

5. Watch cannot measure or data is inaccurate.

A. Remain still and place arms level with the chest before measurement. B. Adjust watch tightness so the back is close to the skin, preventing light leakage. C. Stay calm during measurement; talking, coughing, or sneezing can affect accuracy.

FCC Compliance Information

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.