PANDUIT WIRE BASKET

Components Included:

• Connection Plate (1) Provided
• Protective Radius Sheet (2) Provided
• Radius Support Bracket (2) Provided
• Mounting Hardware Included

Installation Steps:

1. Prepare the Basket: For a 12" wide basket (shown for reference), cut away both sides of the basket end. Ensure to leave at least one cross wire spacing. For other widths, cut the sidewall away up to the line wire.
2. Attach Radius Support Brackets: Assemble one radius support bracket to each side of the baskets. Keep the supplied fasteners loose during this step.
3. Hang the Basket: Hang the basket using customer-supplied threaded rods. Ensure all trapeze brackets are positioned within 2 feet from the intersection point.
4. Connect Baskets: Add one connection plate to cover the gap between the baskets. Loosely attach with the supplied fasteners.
5. Secure Assembly: Tighten all fasteners securely.
6. Install Protective Sheets: Place the two protective sheets along the radius of the corner. These can be attached using push-in fasteners and cable ties if desired.

Assembly is now complete. ✔️

Technical Support and Resources:

For technical support, installation instructions in local languages, and additional resources, please visit:

www.panduit.com/resources/install_maintain.asp

You can also reach out via email at techsupport@panduit.com or by phone at 866-405-6654.