55-inch Outdoor Wall Mounted Non-Touch Digital Signage

Thank You

Thank you for purchasing this product from Displays2go.

It's our mission to help you connect with the world and build your brand with products that are personalized to your needs.

Your product has been manufactured with great care using only the finest quality materials and expert workmanship. Our Quality Assurance team inspects all electronics during assembly process to assure reliable operation. This product comes with a 12-month warranty. Scan the QR code [QR Code] to visit the product page and learn more about your warranty.

Need assistance? We are available for expert advice and all of your customer service needs.

• Chat Us: DISPLAYS2GO.COM
• Email Us: INFO@DISPLAYS2GO.COM
• Call Us: 1-844-221-3388

Before Use

Safety Warnings and Precautions

Thank you for purchasing the high-performance digital signage from Displays2go. We have considered the factors to ensure personal safety in product design and have tested rigorously at the factory. However, improper installation and use may result in electric shock and fire.

In order to safely use, maximize performance of the unit and extend the life of the product, please read and follow all instructions carefully before using the product. Keep the instructions for future reference.

We strongly recommend using a surge protector or a power strip with internal circuit breaker to prevent damages to the digital signage.

If any of the following occurs:

• Power outage or instable voltage.
• Abnormal sound or smell from the unit.
• AC power cord is damaged.
• Digital Signage is damaged due to drop, knock or impact.
• Any liquid or foreign matters fall into the enclosure.

[Warning Symbol] Turn off the Digital Signage immediately, pull out the plug from the power outlet, and ask the authorized personnel for maintenance quickly.

[Caution Symbol] If coal gas or other flammable gas leaks, do not pull out the plug of the LCD digital signage or other electrical appliances; instead, turn off the gas valve immediately, and open the doors and windows quickly.

WARNING

• [Prohibited Symbol] Cut off the power supply before connecting or disconnecting any cables.
• Do not place the Digital Signage on any instable positions, or else it may be damaged or cause fire.
• Do not place the Digital Signage in the positions such as:
  • The environment subject to direct strong sunlight, moisture, extreme temperature or too much dust,
  • The environment with flammable or explosive materials,
  • The environment with flammable or corrosive gases,
• Do not use damaged or inappropriate power outlets, and ensure that the plugs and outlets contact properly.
• Do not let dust or metal deposits adhere to the plugs and outlets.
• Do not damage the power cords:
  • Do not modify the power cords,
  • Do not place heavy objects on the power cords,
  • Keep the power cords away from heat source,
• Do not pull the cord to remove the plug.
• Do not connect too many plugs to one outlet in parallel, or else it may cause fire due to excessive power consumption.
• Do not approach the Digital Signage with open flame (e.g. a lighted candle), or else it may cause electric shock or fire.
• Do not put any sharp objects, metal or liquid into the vents or let them touch the signal terminals to avoid short circuit, product damage, and electric shock.
• The openings in the enclosure are designed for ventilation and cooling, to ensure long time reliable running of components inside the enclosure and prevent overheating. Do not block the openings when place the unit.
• [Warning Symbol] Do not touch the plugs with wet fingers, or else it will cause electric shock.
• [Warning Symbol] Do not use the Digital Signage in stormy weather, especially when there is lightning, instead, please disconnect the power and antenna plugs to avoid lightning strike.
• [Prohibited Symbol] Do not disassemble the Digital Signage without permission, or else it may cause electric shock or fire. Please ask qualified technician for repair.

CAUTION

• Do not let children climb onto the Digital Signage.
• Keep the small parts away from children to prevent them from swallowing.
• If the Digital Signage won't be used for a long time, please turn it off and pull out the power plug.
• To adjust the position of the Digital Signage, please disconnect all power cords and move slowly to avoid tip over.
• Do not scratch or knock the LCD with hard object, or twist and squeeze the LCD.
• Do not turn on the unit immediately when it is moved from a place with low temperature to high temperature, or else it will cause condensation and malfunction.
• Before cleaning the Digital Signage, please pull out the power plug, wipe with soft cloth, do not use industrial chemicals, prevent foreign matters from entering the machine. Improper cleaning (such as cleaning solution, water) may damage the product, erase the printed information, and even cause damage of the components if fluid flows in, resulting in machine failure.
• If the unit displays the same screen for a long time or the moving picture has fixed text or icon, it will leave ghosting on the screen and won't disappear when the unit is turned off, it is normal and isn't covered by the warranty.
• The power of the Digital Signage can be cut off by pulling out the plug.
• If the LCD screen ruptures and the liquid splashes on the skin, please rinse for 15 minutes with clean water immediately, and consult your doctor.
• To carry the Digital Signage with hands, please grab and hold the edges, do not apply pressure on the panel.
• Use the Digital Signage properly: Use in proper lighting conditions, insufficient lighting or long time watching will impair your eyesight.
• Unplug device to disconnect from power.
• Insert the plug into the outlet properly, or else it may cause sparks and fire.

The technical specifications printed herein and on the packaging are subject to change without prior notice. The Manual may be slightly different from actual operation, and the latter is applicable.

If you have any questions regarding our products, please visit us at www.displays2go.com or contact Displays2go customer service at 844-221-3388.

Packing List

Parts Diagram

The diagram shows the back of the digital signage unit with various components labeled.

• 1: LCD Screen
• 2: Ambient Light Sensor
• 3: Remote Sensor
• 4: Handle
• 5: VESA Mounting Bracket
• 6: Antenna
• 7: Speaker
• 8: AC Power Cord
• 9: On/off switch
• 10: USB 2.0 port
• 11: USB 2.0 port
• 12: USB 3.0 port
• 13: HDMI-IN
• 14: RJ45 port

[Caution Symbol] Disconnect the power plug before assembling or disassembling the unit!

Assembly

[Note Symbol] Two people required for safe assembly of product.

Step 1: Loosen the two M6x25 fixing screws to remove the VESA bracket from the backplate.

Step 2: Secure the removed bracket to the display wall using six M6x85 expansion screws.

Step 3: Lift and place the screen onto the mounted bracket on the wall.

Step 4: To prevent the LCD from slipping off the bracket due to external forces, tighten the two M6x25 screws as shown in the diagram.

Unit Dimensions

The dimensions of the bracket and LCD are shown below for installation reference.

Diagram shows a top-down view of the mounting bracket and display with dimensions:

• Overall Width: 1281mm
• Overall Height: 752mm
• Horizontal Bracket Spacing (left): 270mm
• Horizontal Bracket Spacing (right): 270mm
• Vertical Bracket Spacing (top): 450mm
• Vertical Bracket Spacing (bottom): 400mm
• Horizontal mounting area: 600mm

Operation

Power On/Off

• Start up by inserting the power cord into the unit and connecting to an outlet. Flip the power switch to ON.
• To power on or off, press the [Power Symbol] power button on the remote control.
• To shut down, flip the power switch to OFF, then unplug the unit.

[Caution Symbol] Disconnect the power plug before assembling or disassembling the unit!

HDMI Connection

1. Connect PC or media player via HDMI port.
2. Open the HDMI In app (see next page for instructions on navigating applications). The HDMI input appears on screen.

[Note Symbol] Some media players may not be supported.

To automatically display HDMI input upon device startup, open the HDMI Auto-boot app and use the toggle to enable auto-boot. This allows HDMI input to display instead of the Android operating system every time the unit is powered on.

HDMI IN [HDMI Icon]

HDMI Auto Boot [HDMI Icon]

Remote Control

To control the unit, aim the remote control at the unit's remote sensor, located at the right corner below the screen. For best performance, avoid exposing the receiver window to direct sunlight or placing objects between the remote control and the receiver. For convenient navigation, we recommend connecting an external mouse.

[Note Symbol] The remote requires 2 AAA batteries, not included.

Remote Control Layout:

• Power [Power Symbol]
• (No Function)
• Mute [Mute Symbol]
• Volume Down/Up [Volume Up/Down Symbols]
• Navigation Arrows [Arrow Symbols]
• Select [OK Symbol]
• Home [Home Symbol]
• Return to Previous Page [Back Symbol]
• Background Applications [App Symbol]
• (No Function)

[Note Symbol] The real appearance of the remote control may be different from the picture; please refer to the actual product.

Settings

Once turned on, the unit automatically displays the home screen, which includes the navigation bar and the App Drawer.

[Note Symbol] The navigation bar can be minimized. To restore the navigation bar, go into Display settings and enable Display Navigation.

Navigation Bar Diagram: Shows icons for Back, Background Applications, Take Screenshot, Volume Down, Home, Volume Up. An 'App Drawer' icon is shown separately, described as 'Shows all apps'. The Navigation Bar is labeled as 'Enlarged view left'.

ANDROID QUICK START GUIDE

Adjust settings by tapping the App Drawer, and launching the Settings app.

WI-FI CONNECTION

1. Open Settings, and select Network and Internet from the list of settings.
2. Select your Wi-Fi network and enter your login credentials. Click Okay.

For Ethernet Connections, plug an Ethernet cable into the Ethernet (RJ45) port of the unit and connect to an Internet router. Ethernet network connection is complete.

SOUND

1. Open Settings, and select Sound.

From this menu, you can individually control the volume of alarms, calls, notifications, and your media. You can also change default notification sounds or turn Do Not Disturb on or off.

BLUETOOTH CONNECTION

1. Open Settings, and select Connected Devices.
2. Click Pair New Device. Make sure your Bluetooth device is in pairing mode.

For future connections, select the device from the list of previously connected Bluetooth devices.

[Note Symbol] To share files over Bluetooth, you must enable Wi-Fi and Bluetooth Scanning in the Location settings.

SYSTEM LANGUAGE

1. Open Settings, and select System.
2. Click System Language, then click Languages.
3. Click + Add a language and select a language. It appears as the 2nd installed system language.
4. Drag your preferred system language to the first position of the list. The system language updates automatically to the first listed language.

SCREENSHOTS

1. Open Settings, and select Screenshot.
2. Adjust the screenshot delay and enable or disable the Screenshot button in the navigation bar.

Find recent screenshots in the Google Files app. Choose the unit, click Pictures, then click Screenshots.

FACTORY RESET

1. Open Settings, and select System.
2. Select Advanced Options.
3. Click Reset Options.
4. Select Erase All Data (Factory Reset). Then click Erase All Data.

DiViEX App

The DiViEX Slideshow App comes pre-installed on this digital product for convenient content management. There are 2 methods for uploading media: saving media files to internal storage, or creating a specific folder on a USB, then inserting into unit. After, open the app to launch a slideshow or adjust picture settings, add filters and stickers, queue music and more!

UPLOAD MEDIA

METHOD 1: PLAY MEDIA VIA INTERNAL STORAGE

1. Insert USB into the unit.
2. Open the File Explorer app and navigate to the location of your files using the toolbar.
3. Click, then click each media file to be copied.
4. In the File Explorer toolbar, click [Copy Icon].
5. Navigate to Internal Memory, then open the 'MediaFolder' folder.
6. Copy files to designated folder (i.e., image files to 'Image' folder) by clicking [Copy/Paste Icon].
7. Open the DiViEX app. Your images and videos appear in the DiViEX slideshow timeline.

Internal Memory/MediaFolder Toolbar: Home, LevelUp, Multi, Editor, NewFolder, Back [Back Arrow], Next [Next Arrow].

METHOD 2: PLAY MEDIA VIA USB

1. On your computer, create a new folder and name it "MediaFolder".
2. In "MediaFolder," create 3 subfolders. Rename them: "Images"; "Videos"; "Music".
3. Copy your desired images, videos, and music to the corresponding folder.
4. Copy "MediaFolder" to a USB and safely eject USB from computer. Insert into unit, then open DiViEX.

[Warning Symbol] If DiViEX stops running after pressing play, check:

• USB is set up correctly on the USB.
• The supported file formats are used.

USB Folder Structure: MediaFolder > Name > Images, Music, Videos.

PLAYLIST SETTINGS

Edit the overall playlist settings in the Settings tab. Once settings are adjusted, click PLAY or adjust further in the Edit or Music tab.

Playlist Settings UI Description:

• A. AUTOMATIC SETTINGS: Enable or disable automatic settings. Auto-Boot: Automatically launch DiViEX when unit is powered on. Auto-Play: Automatically play slideshow when DiViEX opens.
• B. USB DISK STATUS: Status of USB.
• C. IMAGE DISPLAY TIME: How long each image is shown. Drag slider to increase or decrease. NOTE: Does not apply to video.
• D. PICTURE DISPLAY MODE: Choose how each image/video fits on the screen. Adapt: Crop image to screen. Center: Center image regardless of aspect ratio.
• E. PICTURE SWITCH MODE: Choose animated transition effect for slideshow.
• F. PLAY: Play playlist with selected settings.

EDIT

Tweak each photo individually in the Edit section.

Edit UI Description:

• A. PHOTOS: Images/Video thumbnails in sequential order. Drag to rearrange.
• B. EDIT TOOLS: Crop, Add Text, Add Filter, Add Sticker, Add Frame.
• C. TOOLBAR: This white bar shows tool options for each of the Edit tools. Choose aspect ratios when cropping, adjust text, and scroll to select stickers, frames, and filters.
• D. RESET: Reset all edits.
• E. SAVE / SHARE: Save progress or share playlist. After saving, go back to the upper left.

MUSIC

Choose music from the Music folder to play during slideshow. Press the left arrow [Left Arrow Symbol] (F) to add music to the slideshow playlist. Press the right arrow [Right Arrow Symbol] (G) to remove songs from the playlist. The number of songs in the playlist is shown in the upper left.

Music Playlist UI: Shows 'Music songs in playing list' and 'Playing list music'.

Reference

Technical Specifications

Cleaning and Maintenance

• Avoid strong vibration or impact on the product.
• Clean screen and product by using a glass cleaner.
• If the product will not be used for a long time, unplug the power cord to prevent the internal short circuit or other potential dangers.

Troubleshooting Guide

[Note Symbol] Do not attempt to replace or repair circuitry yourself. Contact customer service to schedule a professional maintenance appointment.

If all the potential solutions have been tested for a particular issue and problems have not been resolved, contact a customer service representative for guidance.

844-221-3388

info@displays2go.com

Names and Contents of Toxic and Hazardous Substances or Elements

The table shows that the machine contains harmful substances inside. The data is provided by material suppliers and verified by the company according to the material type. Some materials contain harmful substances that can't be replaced in present technology. We are dedicated to improving this.

O: the content of the toxic and hazardous substances or elements in the part is lower than the limit specified in GB/T 26572-2011 standard.

x: the content of the toxic and hazardous substances or elements in the part is higher than the limit specified in GB/T 26572-2011 standard.

* : Packaging materials include packaging box, styrofoam, etc.;

* : Circuit board assembly includes PCB and the electronic elements thereof;

* : Other accessories include instruction manual.

The EFUP of the product is ten years. The pollution control label is shown right. [EFUP Symbol - 10 years]. The EFUP is valid only when the user operates in the normal conditions specified in the manual herein.

Waste Electrical and Electronic Products Recycling and Disposal Regulations

To protect the earth, if you do not need this product or its service life expires, please abide by your local Waste Electrical and Electronic Products Recycling and Disposal Regulations or send it to qualified local manufacturer for recycling.

FCC Compliance Notice

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 8 inches (20cm) between the radiator and your body.