M&M Stainless Steel Spin Kit

Model Number: MM00189

Product Description

This kit includes a 360° Stainless Steel Swivel Spinner and a 10 ft. Tree Strap, designed for safe and durable outdoor play equipment installation.

Easily adjustable 10 ft. strap anchors to any safe tree, beam, or play structure.
Protects trees by minimizing damage; safer, stronger, and easier to use than rope.
Constructed from 1-7/8" non-stretch, 5-panel polyester webbing.
Resistant to abrasion and water, with UV inhibitors to prevent sunlight decay.
Loop ends are securely doubled over for durable connection points with swing hardware.
Features a Box-X pattern sewn into the strap for uniform stitch length and strength.

Safety rated to 2000 lbs.
Allows for 360-degree rotation in either clockwise or counterclockwise direction.
Provides a quick, sturdy, and durable assembly for any single-point hanging swing.
Rounded edges ensure safe attachment to carabiners, spring clips, tree straps, rope, or chain.
Made with quality, corrosion-resistant 304 stainless steel construction.

Find a suitable spot: Locate a healthy horizontal tree branch (minimum 8" diameter), beam, or playground structure. WARNING: Avoid any strap edges or abrasive contact with the strap to maximize its life and function. Ensure the area surrounding the hanging site is clear of obstacles and is over flat, soft terrain.
Wrap the tree strap around the sturdy branch or object. Pass the end with the swivel spinner through the other loop end. The excess strap should hang from the underside of the branch. (See: Figure A for initial wrap).
To adjust the height, continue wrapping the strap around the tree branch and through the loop multiple times until the desired length is achieved (See: Figure B for height adjustment by wrapping), or create a loop with the center of the strap and pull both ends through (See: Figure C for height adjustment by creating a loop).
Pull the strap tightly to secure it against the branch.
Attach your swing securely to the Stainless Steel Swivel Spinner, using an optional carabiner or by attaching the swing's hanging hardware directly to the lower portion of the spinner.

Regularly check your Stainless Steel Spin Kit for signs of wear. If any part of the kit is worn down, discontinue use.
The tree strap safely supports a maximum weight of 800 lbs.