User Manual for Shenzhen Xiwxi Technology models including: DBK03, 2ASLT-DBK03, 2ASLTDBK03, DBK03, TWS Bluetooth Headset
SHENZHEN XIWXI TECHNOLOGY CO., LTD DBK03 TWS Bluetooth headset 2ASLT-DBK03 2ASLTDBK03 dbk03
CH
AD
DBK03
MFB
MIC \ Type-C
1. 2. (/ 3. 4.DBK03
"QiiPhone" DBK03 WatchApple WatchiPhone
Siri IOS 3
31
5
LED
21
1 1 5
/
1. 2.
TYPE-C 5V 1A
+ /
MFB MFB MFB MFB /MFB /MFB /MFB2 /MFB2 /3MFB
\-
V5.2+EDR A2DP,AVRCP,HFP,HSP
2.402GHz~2.480GHz 10mm*2 16 60 5 5 40mAh 1 300mAh 1 3.9g
( ;
10m
×
10m
1. 2. 3.-1060 4. 5. 6. 7. 8. 9 .2A
!
EN Product overview
AD
DBK03
User Manual
Thanks for using our wireless electronic products. For a good user experience, please read the manual carefully before using the products. Notice: To avoid unnecessary troubles please do not disassemble these products by yourself and use the standard charger to charge.
Left Right
MIC \ Indicator Light of earbuds Type-C Charging Port Charging contacts
Earbuds Manual
Pairing Manual
1. Please fully charge the earbuds and charging case before using it 2.Take out the two earbuds, they will automatically be turned on and connected, then they will enter the waiting for paring mode (red/blue lights flashing alternately). 3. The earbuds will be automatically paired. After the pairing is successful, the right earbud indicator turns off, and the left earbud indicator flashes red and blue alternately 4. Turn on the Bluetooth function of the mobile phone and search, find the device named}DBK03~ and connect it.
Settings
Bluetooth
Bluetooth
Now discoverable as"Qi iPhone".
MYDEVICES
DBK03
To pair Apple Watch with your iPhone, go to the Watch app.
Siri and other Voice Assistant
After IOS and part of Android users connected the earbuds, please touch the left earbud or the right earbud touch button for 3 times to open the voice assistant operation.
Turn ON
The earbuds will be turned on automatically after take out them from the charging case; Or touch the touch button for 3 seconds until the indicators flash blue once.
Turn OFF
The earbuds will automatically turn off and enter the charging state after putting them in the charging case, or they will automatically turn off after disconnecting the Bluetooth connection for 5 minutes.
LED Indicator
Charging for case
Status Charging case charging Full battery Charging for earbuds Low Battery
Light Orange indicator light flashes
Orange indicator on Orange indicator light flashes
Orange light flashes once every 2 seconds
Earbuds indicator
Status
Indicators
Turn on Blue indicators stay one second
Turn off Red indicators stay one second
Searching mode
The indicator lights will flash red and blue
Connected successfully
light flashes in red and blue for 5 seconds
Music-play mode Battery low Charging mode Fully charged
No light Red indicators flash Red indicators stay solid Red indicators turn off
Restore factory setting
Please turn off the Bluetooth of the mobile phone and the earbud light will flash red / blue. Quickly press the power button of the earbuds three times.
Charge
Note: Please fully charge the earbuds and charging case before using it
Charging earbuds
Red indicators flash when battery low, please charge in time. 1.Put both earbuds into the charging case,
they will charge automatically. 2.Charging will stop when earbuds are fully charged.
Charging Case Orange indicator flashes when charging case with low battery, please charge in time. Plug the TYPE-C cable into the charging interface and the charging case will charge automatically. (When charge current over 5V 1A, the charging case will limit the current automatically)
Button control
Power on Automatically turn on when take-out case
Power off Automatically turn off when back into case
Previous track Double-click the MFB button on the left ear
Next track Double-click the MFB button on the right ear
Volume - Hold and press left earbud MFB Button
Volume + Hold and press right earbud MFB Button
Play / Pause
Left/right ear click MFB button
Answer the call
Left/right ear click MFB button
Hang up Reject call
Long press the MFB button on the left/right ear for 2 seconds
Long press the MFB button on the left/right ear for 2 seconds
Voice activated assistant Left/right earphone quickly clicks the MFB button 3 times
Warm notice
For any single earphone, when it is in standalone mode, you can't use it to play the previous song or decrease the volume.
Specifications
Version
V5.2+EDR
Support
A2DP, AVRCP, HFP, HSP
Transmission distance
Frequency range
2.402GHz~2.480GHz
Speaker
10mm*2
Impedance
16
Standby time
60 hours
Talk time
5 hours
Playing time
5 hours
Earbud battery capacity
40mAh
Fully charged time
1 hour
Charging case battery capacity
300mAh
Charging time of charging case About 1 hour
Weight (single earbud)
3.9g
Non-waterproof
The product is anti-sweat. Please rub it with wet cloth or paper to clean it! Don't let soaked in water or drenched in rain.( Don't take it to sweat steaming house in case that steam does damage to the product)
Rub it with a damp cloth rinse,soak and wash
anti-sweat
drenched
Signal transmission distance shown as below: 10m Signals is in normal transmission.
×
10m Signals will be interrupted.
Attentions
1.Don't use water or corrosive solvent to rinse the device
2.If it comes into contact with chemicals, please rub it with a damp cloth wet with clean water.
3.Do not use this product under extreme circumstances for temperature below -10 degree Celsius or above 60 degree Celsius .
4.To avoid explosion, please do not throw this product into fire.
5.To avoid scratches, please do not touch the earbuds with sharp objects.
6.Do not insert objects into the earbuds, otherwise it would cause damage to the internal components.
7.Do not disassemble the earbud. 8. Please keep regular charge to earbuds, don't leave
them become empty battery status to keep their lifetime. 9. Please do not charge products with power
adapter over 2A current. Excessive current may cause the damage to battery.
Battery Warning
There is a built-in lithium battery in this product. To avoid explosion, do NOT expose the product to strong sunlight, fire or throw it into fire.
FCC Caution
JP
AD
DBK03
MFB
1. 2. 3. 4. DBK03
Settings
Bluetooth
Bluetooth
Now discoverable as"Qi iPhone".
MYDEVICES
DBK03
To pair Apple Watch with your iPhone, go to the Watch app.
Siri
IOSAndroid or Siri Sir
LED
21
5
Bluetooth/ 3
100
1. 2.
TYPE-C 5V1A 5V1A
MFB
MFB MFB
//MFB / / MFB2 Siri3MFB
V5.2+EDR A2DP,AVRCP,HPF,HSP
2.402GHz~2.480GHz
10mm*2
16
60
5
5
40mAh
1
300mAh
1
3.9g
10m
×
10m
1. 2. 3. -1060 4. 5. 6. 7. 8. 9. 2A 2A
128g 70*50mm
Adobe PDF library 15.00 Adobe Illustrator(R) 17.0