Ustellar | Smart Decor Lighting Innovator
User Guide for Ustellar models including: UT888615 LED Flood Light, UT888615, LED Flood Light, Flood Light, Light
Ustellar LED Flood Light 150W/200W E-manual
File Info : application/pdf, 8 Pages, 14.52MB
DocumentDocumentLED Flood Light User Guide English LED Flood Light User Guide Thank you for ordering from Ustellar. Set-up is easy and takes only a few minutes by following the instrucons. Warning (1) Please check if the light and the parts are intact before installaon. (2) Make sure to cut off power before installaon. (3) Please do not place this light in corrosive condions. (4) If there is any damage to the cord, please cut off the power and stop using it immediately. (5) Please do not retrofit the light within the warranty period. (6) To ensure the light works properly, please use the voltage indicated on the packing. 1. Parameters Model Waage Max Luminous Flux Color Temperature Dimmable Input Voltage Frequency Waterproof Rang Bean Angle Working Temperature UT888615 150W 13500lm 5000K No 120V AC 50/60Hz IP66 120° -20°C-40°C UT888620 200W 18000lm 1 2. Components English Heatsink Lock screw Reflector LED light source Tempered glass lid Bracket 18AWG 3×0.824mm² L L--B l a c k G--Green N N--White Warning: if the lighng for outdoor use, waterproof treatment should be done at the joints. 2 3. Dimension English 22cm/8.7in 32.5cm/12.8in 3.5cm/1.4in Model: UT888615 Waage: 150W Weight: 4lb/1.8kg Max Projected Area: 100 26.5cm/10.5in 38.5cm/15in Model: UT888620 Waage: 200W Weight: 4.85lb/2.2kg Max Projected Area: 130 3 3.5cm/1.4in English 4. Installaon Step A: According to the spacing of two screw bits on the bracket, drill two holes on the mounng panel. A Note: Maximum mounng height is over 5m. Step B: Aim the bracket at the holes and fix it with two bolts. Step C: Adjust the lighng direcon up or down as per your need and plug in to power the light on. B C 4 Note: English 01 01 Make sure that the distance between the light and the object being lits is more than 1 meter, so as to avoid high temperature caused by short distance. Limitaon of Indoor and Outdoor Use (1) This light is waterproof and damp proof. It is protected against the rain, but it cannot be immersed in water. (2) The mounng posion of this light should be able to bear at least 10 mes as heavy as the light. (3) This light should be used in condion that is good for heat dissipaon. Its working temperature should be less than 45°C Too high the working temperature will cause serious lumen depression and affect lifespan of the light. The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire shall be replaced. 5 English Contact Us Have some issue? No worries! Please reach us via these channels. Our customer services team is more than happy to help. www.ustellar.com support@ustellar.com Manufacturer: Shenzhen Ustellar Technology Ltd. (shen zhen shi you shi tuo ke ji you xian gong si ) Address: 308A, 3/F, Building A, Youth Entrepreneur Hub, Jianshe East Road, Qinghua Community, Longhua Street, Longhua District, Shenzhen, CHINA 518000 6 E-manual Step 1: Scan the QR code Step 2: Click E-manual PDF file Step 3: Read file online or download Go paper-free, make life easier, and do something good for the environment.