User Manual for HOOKE ROAD models including: BXG.1005-S Wrangler TJ Tube Half Door Offroad Tubular Trail Doors, BXG.1005-S, Wrangler TJ Tube Half Door Offroad Tubular Trail Doors, Offroad Tubular Trail Doors, Tubular Trail Doors
Hooke Road Wrangler TJ Tube Half Door Offroad Tubular Trail Doors Compatible with Jeep Wrangler TJ 1997-2006 : Automotive
Hooke Road Bumper Installation Instructions | Installation Manual – Hooke Road 4x4
Hooke Road Bumper Installation Instructions | Installation Manual – Page 2 – Hooke Road 4x4
Tubular Doors (1) Contents: BXG.1005-S Qty Part Name Size(mm) 12 Button Head Socket Cap Bolts Screws M8*25 Picture 12 Split Lock Washer 12 Flat Washer 12 Flange Hex Lock Nuts D8 M8*20*1.5 M8 (2) Tools required: a. 5mm Hex Socket Wrench; b. 14mm Wrench; (3) Installation time: About 1 hour, 2-3 people may be needed. Installation time may differ according to your mechanical skill level. (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!) To view the electronic version (BXG.1005-S), please scan the QR code. (4) Installation instruction: Step 1: Begin the installation by removing the original doors. Step 2: Assemble the door hinges. Note:don't tighten up the bolts too much for a adjustable operation in the next step. Step 3: Install the tubular door into the the car by aligning and putting into hinges. Step 4: Assemble the lower door hinge & the strap to the tubular door. Step 5: The same install operation for the passenger side. Step 6: Installation completed. Attention: 1.The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product. 2.Please feel free to contact your distributor if you have any kind of question about your purchase. Hooke Road to find your partsWPS 文字