User Manual for BOSCH models including: WAN24282GB, Washing Machine, WAN24282GB Washing Machine, Machine
il y a 2 jours — Table of contents. 1 Safety............................................ 4. 1.1 General information.................... 4. 1.2 Intended use.
Online help, spare parts and accessories | Bosch UK
File Info : application/pdf, 52 Pages, 3.91MB
DocumentDocumentbMogesyncRtBwehfeorwe-egshlecidcoshoebmtevmneeirnoce.eweycfoooiatumnsnr:d/
Washing machine
WAN24282GB
[en]
User manual and installation instructions
en
Futher information and explanations are available online:
Table of contents
1 Safety ............................................ 4 1.1 General information.................... 4 1.2 Intended use............................... 4 1.3 Restriction on user group........... 4 1.4 Safe installation .......................... 5 1.5 Safe use ..................................... 7 1.6 Safe cleaning and mainten-
ance............................................ 9 2 Preventing material damage ..... 10 3 Environmental protection and
saving energy............................. 11 3.1 Disposing of packaging ........... 11 3.2 Save energy and conserve
resources.................................. 11 3.3 Energy saving mode ................ 11 4 Installation and connection....... 12 4.1 Unpacking the appliance ......... 12 4.2 Contents of package................ 12 4.3 Requirements for the install-
ation location ............................ 12 4.4 Removing the transit bolts ....... 13 4.5 Connecting the appliance ........ 14 4.6 Aligning the appliance.............. 15 4.7 Connecting the appliance to
the electricity supply................. 16 5 Familiarising yourself with
your appliance............................ 17 5.1 Appliance ................................. 17 5.2 Detergent drawer...................... 18 5.3 Control panel............................ 18 6 Before using for the first time ... 19 6.1 Starting an empty washing
cycle ......................................... 19
7 Display ........................................ 20 8 Buttons ....................................... 22 9 Programmes ............................... 23 10 Accessories.............................. 27 11 Laundry..................................... 27 11.1 Preparing the laundry ............. 27 12 Detergents and care
products ................................... 28 13 Basic operation ........................ 28 13.1 Switching on the appliance .... 28 13.2 Setting a programme ............. 28 13.3 Adjusting the programme
settings ................................... 28 13.4 Loading laundry...................... 28 13.5 Inserting the measuring aid
for liquid detergent ................. 29 13.6 Adding detergent and care
product ................................... 29 13.7 Starting the programme ......... 29 13.8 Changing the activated
"Ready in" time ....................... 30 13.9 Soaking laundry ..................... 30 13.10 Adding laundry ..................... 30 13.11 Cancelling the pro-
gramme ................................ 30 13.12 Resuming the programme
when the programme status is Rinse Hold ............. 30 13.13 Unloading the laundry .......... 30 13.14 Switching off the appliance...................................... 30
2
en 14 Childproof lock......................... 31 14.1 Activating the childproof
lock ......................................... 31 14.2 Deactivating the childproof
lock ......................................... 31 15 Basic settings........................... 31 16 Cleaning and servicing ............ 31 16.1 Cleaning the drum.................. 31 16.2 Cleaning the detergent
drawer..................................... 32 16.3 Cleaning the drain pump........ 33 17 Troubleshooting....................... 36 17.1 Emergency release ................ 44 18 Transportation, storage and
disposal .................................... 44 18.1 Removing the appliance ........ 44 18.2 Inserting the transit bolts........ 44 18.3 Using the appliance again ..... 44 18.4 Disposing of old appliance .... 45 19 Customer Service..................... 45 19.1 Product number (E-Nr.) and
production number (FD)......... 45 20 Consumption values................ 47 21 Technical data .......................... 48
3
enSafety
1Safety
Observe the following safety instructions. 1.1General information
¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe
for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2Intended use Only use this appliance: ¡ For washing machine-washable fabrics and hand-washable wool
in accordance with the care label. ¡ With tap water and commercially available detergents and care
products suitable for washing machines. ¡ In private households and in enclosed spaces in a domestic en-
vironment. ¡ Up to an altitude of max. 4000 m above sea level. 1.3Restriction on user group This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers. Children must not play with the appliance. Cleaning and user maintenance must not be performed by children unless they are being supervised. Keep children under the age of 3 years and pets away from the appliance.
4
Safetyen
1.4Safe installation Take note of the safety instructions when installing the appliance.
WARNING Risk of electric shock! Improper installation is dangerous. Connect and operate the appliance only in accordance with the
specifications on the rating plate. Connect the appliance to a power supply with alternating cur-
rent only via a properly installed socket with earthing. The protective conductor system of the domestic electrical in-
stallation must be properly installed. The installation must have a sufficiently large cross section. When using a residual current circuit breaker, only use a type with the mark. Never equip the appliance with an external switching device, e.g. a timer or remote control. When the appliance is installed, the mains plug of the power cord must be freely accessible. If free access is not possible, an all-pole isolating switch must be installed in the permanent electrical installation according to the installation regulations. When installing the appliance, check that the power cable is not trapped or damaged. If the insulation of the power cord is damaged, this is dangerous. Never let the power cord come into contact with hot appliance parts or heat sources. Never let the power cord come into contact with sharp points or edges. Never kink, crush or modify the power cord.
WARNING Risk of fire! It is dangerous to use an extended power cord and non-approved adapters. Do not use extension cables or multiple socket strips. If the power cord is too short, contact Customer Service. Only use adapters approved by the manufacturer.
5
enSafety
WARNING Risk of injury! The high weight of the appliance may result in injury when lifted. Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. Only stack the dryer on a washing machine using the connec-
tion kit from the dryer manufacturer . No other installation method is permitted. Do not install the appliance in a washer-dryer stack if the dryer manufacturer does not offer a suitable connection kit. Do not install appliances from different manufacturers and with varying depths and widths in a washer-dryer stack. Do not install a washer-dryer stack on a platform; the appliances may tip over.
WARNING Risk of suffocation! Children may put packaging material over their heads or wrap themselves up in it and suffocate. Keep packaging material away from children. Do not let children play with packaging material.
CAUTION Risk of injury! The appliance may vibrate or move when in use. Place the appliance on a clean, even, solid surface. Align the appliance using the appliance feet and a spirit level. If hoses and power cords have been laid incorrectly, this causes a tripping hazard. Lay hoses and power cords in such a way that there is no risk
of tripping. If the appliance is moved by holding onto protruding components, such as the appliance door, the parts may break off. Do not move the appliance by holding onto protruding parts.
CAUTION Risk of cutting! Touching sharp edges on the appliance may lead to cuts. Do not touch the sharp edges on the appliance.
6
Safetyen
Wear protective gloves when installing and transporting the appliance.
1.5Safe use WARNING Risk of electric shock!
If the appliance or the power cord is damaged, this is dangerous. Never operate a damaged appliance. Never pull on the power cord to unplug the appliance. Always
unplug the appliance at the mains. If the appliance or the power cord is damaged, immediately un-
plug the power cord or switch off the fuse in the fuse box and turn off the water tap. Call customer services. Page 45 An ingress of moisture can cause an electric shock. Only use the appliance in enclosed spaces. Never expose the appliance to intense heat or humidity. Do not use steam- or high-pressure cleaners, hoses or sprays to clean the appliance.
WARNING Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. Do not install the appliance behind a door as this may obstruct
the appliance door or prevent it from opening. With redundant appliances, unplug the power cord. Then cut
through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close.
WARNING Risk of suffocation! Children may breathe in or swallow small parts, causing them to suffocate. Keep small parts away from children. Do not let children play with small parts.
7
enSafety
WARNING Risk of poisoning! Detergents and care products may result in poisoning if consumed. If accidentally swallowed, seek medical advice. Keep detergents and care products out of the reach of children.
WARNING Risk of explosion! Laundry that has been pretreated with cleaning agents that contain solvents may cause an explosion in the appliance. Rinse pretreated laundry thoroughly with water before washing.
CAUTION Risk of injury! The covering plate may break if you stand on or climb onto the appliance. Do not stand on or climb onto the appliance. The appliance may tip over if you sit on or lean against the open door. Do not sit on or lean against the appliance door. Do not place any objects on the appliance door. Reaching into the drum while it is still turning may cause hand injuries. Wait for the drum to come to a complete stop before reaching
inside. CAUTION Risk of scalding!
When you wash at high temperatures, the detergent solution gets hot. Do not touch the hot detergent solution.
CAUTION Risk of chemical burns! If the detergent drawer is opened, detergent and care products may spray out from the appliance. Contact with eyes or skin may cause irritation. Rinse eyes and/or skin thoroughly with clean water if they come
into contact with detergents or care products. If accidentally swallowed, seek medical advice. Keep detergents and care products out of the reach of children.
8
Safetyen
1.6Safe cleaning and maintenance Take note of the safety instructions when cleaning and performing maintenance work on the appliance.
WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained
specialist staff. Only use genuine spare parts when repairing the appliance. If the power cord of this appliance is damaged, it must be re-
placed by the manufacturer, the manufacturer's Customer Service or a similarly qualified person in order to prevent any risk. An ingress of moisture can cause an electric shock. Do not use steam- or high-pressure cleaners, hoses or sprays to clean the appliance.
WARNING Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. Only use the manufacturer's original spare parts and original ac-
cessories. WARNING Risk of poisoning!
Poisonous fumes may be given off if you use cleaning agents that contain solvents. Do not use cleaning agents that contain solvents.
9
enPreventing material damage
2Preventing material damage
Follow these instructions to avoid material damage and damage to the appliance. ATTENTION! The functionality of the appliance may be impaired if you use the wrong quantity of fabric softener, detergent, care product or cleaning agent. Follow the dosage recommenda-
tions from the manufacturer. Exceeding the maximum load capacity impairs the function of the appliance. Observe the maximum load capa-
city for each programme and do not exceed it. "Programmes", Page 23 The appliance is secured for transportation using transit bolts. Transit bolts which have not been removed may result in material damage and damage to the appliance. Before starting up the appliance, remove the transit bolts completely and keep them in a safe place. Before transport, fit the transit bolts fully in order to prevent damage in transit. Material damage may be caused if the water inlet hose is connected incorrectly. Tighten the screw connections on the water inlet until they are handtight. Ideally, connect the water inlet hose directly to the water tap, without any additional connecting elements such as adapters, extensions, valves or similar. Ensure that the inner diameter of the water tap is at least 17 mm.
Make sure that the length of the thread on the connection to the water tap is at least 10 mm.
If the water pressure is too high or too low, the appliance may not be able to operate properly. Ensure that the water pressure in
the water supply system is at least 100 kPa (1 bar) and max. 1000 kPa (10 bar). If the water pressure exceeds the maximum value specified, a pressure-reducing valve must be installed between the drinking water connection and the hose set of the appliance. Do not connect the appliance to the mixer tap of an unpressurised hot-water boiler. Modified or damaged water hoses may result in material damage and damage to the appliance. Never kink, crush, modify or cut through water hoses. Only use the water hoses supplied with the appliance or genuine spare hoses. Never re-use water hoses that have been used before. Operating the appliance using water that is dirty or too hot may lead to material damage and damage to the appliance. Only operate the appliance with cold mains water. Unsuitable cleaning products may damage the surfaces of the appliance. Do not use harsh or abrasive detergents. Do not use cleaning products with a high alcohol content. Do not use hard scouring pads or cleaning sponges. Clean the appliance with nothing but water and a soft, damp cloth.
10
Environmental protection and saving energyen
Remove all detergent residue, spray residue or other residues immediately if they come into contact with the appliance.
3Environmental protection and saving energy
3.1Disposing of packaging
The packaging materials are environmentally compatible and can be recycled. Sort the individual components by
type and dispose of them separately.
3.2Save energy and conserve resources
If you follow these instructions, your appliance will use less electricity and less water.
Set the maximum spin speed if you want to dry the laundry in the tumble dryer afterwards. a The drier the laundry, the shorter
the programme duration when drying which, in turn, reduces energy consumption. A higher spin speed reduces the residual moisture in the laundry and increases the volume of the spin noise.
Wash the laundry without prewash. a Washing with prewash increases
the programme duration and increases energy and water consumption.
The appliance has a continuous automatic load adjustment function. a Depending on the type of fabric
and load capacity, the continuous automatic load adjustment function optimally adjusts the water consumption and programme duration.
Choose programmes with low temperatures and longer wash times and use maximum load capacity. a Energy consumption and water
consumption is most efficient.
Add detergent based on the laundry's degree of soiling. a For light to normal soiling, a smal-
ler amount of detergent is sufficient. Observe the dosage recommendation from the detergent manufacturer.
3.3Energy saving mode
If you do not use the appliance for an extended period, it automatically switches to energy-saving mode. Energy-saving mode ends when you use the appliance again.
Reduce the washing temperature for lightly and normally soiled laundry. a At lower temperatures, the appli-
ance consumes less energy. For light to normal soiling, lower temperatures than indicated on the care label are also sufficient.
11
enInstallation and connection
4Installation and connection
4.1Unpacking the appliance
ATTENTION! Objects remaining in the drum that are not designed for operation with the appliance may cause material damage and damage to the appliance. Remove these objects, along with
all supplied accessories, from the drum before starting the appliance. 1. Remove any packaging and protective covers completely from the appliance. "Disposing of packaging", Page 11. 2. Check the appliance for visible damage. 3. Open the appliance door. "Basic operation", Page 28 4. Remove any accessories from the drum. 5. Close the appliance door.
4.2Contents of package
After unpacking all parts, check for any damage in transit and completeness of the delivery. ATTENTION! If the appliance is operated with incomplete or defective accessories, the appliance may not be able to operate properly, or this may result in material damage or damage to the appliance. Do not operate the appliance with
incomplete or defective accessories.
Replace the accessories in question before operating the appliance. "Accessories", Page 27
Note: The appliance has been tested at the factory to check it is in working order. As a result, water stains may remain in the appliance. These marks will disappear after the first wash cycle. The delivery consists of the following: ¡ Washing machine ¡ Accompanying documents ¡ Transit bolts
"Removing the transit bolts", Page 13 ¡ Cover caps ¡ Water inlet hose "Connecting the water inlet hose", Page 14
4.3Requirements for the installation location
WARNING Risk of electric shock! The appliance contains live parts. Touching live parts is dangerous. Do not operate the appliance
without a cover cap.
WARNING Risk of injury! When using the appliance on a base, the appliance may tip over. Always secure the feet of the appli-
ance to a base using the manufacturer's fixing brackets Page 27 before using the appliance for the first time.
12
ATTENTION! If residual water in the appliance freezes, this may cause damage to the appliance. Do not install or operate this appli-
ance anywhere that is liable to experience frost or outdoors. If the appliance is tilted at an angle greater than 40°, residual water may leak out of the appliance and cause material damage. Tilt the appliance carefully. Transport the appliance in an upright position.
Installation loca- Requirements tion
Base
Secure the appliance with fixing brackets Page 27.
Installation and connectionen
Installation loca- Requirements tion
Against a wall
Do not trap the hoses between the wall and the appliance.
4.4Removing the transit bolts
The appliance is secured for transportation using transit bolts on the rear of the appliance. Note: Keep the transit bolt screws and the sleeves in a safe place for future transport Page 44. 1. Pull the hoses out of the holders.
Wooden joist floor Kitchen unit
Place the appliance on a waterresistant wooden board (minimum thickness of 30 mm) which is screwed tightly to the floor. Only install the appliance underneath a continuous worktop that is securely connected to adjacent cabinets. Required niche width: 60 cm.
2. Unscrew and remove all screws for the 4 transit bolts with a WAF 13 wrench.
13
enInstallation and connection 3. Remove the power cable from the
holder.
6. Press down on the 4 cover caps.
4. Remove the 4 sleeves.
4.5Connecting the appliance
Connecting the water inlet hose 1. Connect the water inlet hose.
5. Put on the 4 cover caps.
2. Connect the water inlet hose to a tap (26.4 mm = 3/4").
3. Open the water tap carefully and check that the connection points are tight.
14
Water outlet connection types This information is intended to help you to connect this appliance to the water outlet.
ATTENTION! When draining, the water outlet hose is subject to water pressure and may come loose from the installed connection point. Secure the water outlet hose
against unintentional loosening.
Note: Observe the draining heights. The draining heights are: minimum: 60 cm, maximum: 100 cm
Siphon
Secure the connection point with a (2440 mm) hose clamp.
Sink
Fix and secure
the water outlet
hose with an el-
bow.
Installation and connectionen
4.6Aligning the appliance
In order to reduce noise and vibration and to prevent the appliance from moving, align the appliance correctly. 1. Loosen the lock nuts using a WAF
17 wrench by turning it in a clockwise direction.
2. To align the appliance, turn the appliance feet. Check that the appliance is level using a spirit level.
Plastic pipe with rubber sleeve
Fix and secure the water outlet hose with an elbow.
All appliance feet must stand firmly on the ground.
15
enInstallation and connection 3. Screw the lock nuts tightly against
the housing using a WAF 17 wrench.
In doing so, hold the foot tight and do not adjust its height.
4.7Connecting the appliance to the electricity supply
Note: Your electrical domestic installation for this appliance must comply with the local legal provisions and safety regulations, and should include a residual current circuitbreaker. 1. Insert the mains plug of the appli-
ance's power cable in a socket nearby. The connection details of the appliance can be found under Technical data Page 48. 2. Check the mains plug is inserted properly.
16
Familiarising yourself with your applianceen
5Familiarising yourself with your appliance
5.1Appliance
You can find an overview of the parts of your appliance here.
3
4
56
2
7
7
1
On certain models, specific details such as the colour and shape may differ from those pictured.
1
Maintenance flap for the drain pump Page 33
2 Door
3 Detergent drawer Page 18
4 Control panel Page 18
5 Water outlet hose Page 15
6 Power cord Page 16
7 Transit bolts Page 13
17
enFamiliarising yourself with your appliance
5.2Detergent drawer
1
Measuring aid for liquid detergent
"Inserting the measuring
aid for liquid detergent",
Page 29
4 3
2
Compartment II: ¡ Detergent for main wash
¡ Water softener
¡ Bleach
¡ Stain remover
12
3
Compartment : ¡ Fabric softener
¡ Liquid starch
¡ Waterproofing agent
4
Compartment I: ¡ Detergent for prewash
¡ Hygiene detergent
5.3Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.
2
3
1
1
4
1 Programmes
2
Programme selector Page 28
3 Display Page 20
18
4 Buttons
6Before firsttime using for the first time
Prepare firsttime the appliance for use.
6.1Starting an empty washing cycle
Your appliance was inspected thoroughly before leaving the factory. To remove any residual water, run the first wash cycle without any laundry. 1. Turn the programme selector to
Cottons 90°. 2. Close the door. 3. Pull out the detergent drawer. 4. Pour approx. 1 litre of tap water
into compartment II.
first timeen 5. Pour standard washing powder
into compartment II.
To prevent foaming, use only half of the amount of detergent recommended by the detergent manufacturer for light soiling. Do not use detergent suitable for woollens or delicates. 6. Push in the detergent drawer. 7. Press Start / Reload to start the programme. a The display shows the remaining programme duration. a After the programme has ended, the display shows: "End". 8. Start the first wash cycle or set the programme selector to Off to switch off the appliance. "Basic operation", Page 28
19
enDisplay
7Display
The display shows the current settings, options or relevant information.
Example: Display
display 0:40 1
10h 1 8,0 kg 1 - 1200
90
1 Example
Designation Programme duration/programme time remaining "Ready in" time Recommended load Spin speed
Temperature
Start/Pause
Rinse Hold
More information Approximate expected programme duration or programme time remaining.
"Buttons", Page 22 The maximum load capacity for the selected programme in kg. Set spin speed in rpm. "Buttons", Page 22 0= No final spin, only draining : Rinse Hold, no draining Set temperature in °C. "Buttons", Page 22
(cold) Start, cancel or pause ¡ Lights up: The programme is running
and can be cancelled or paused. ¡ Flashes: The programme can be star-
ted or continued. Programme status
20
display End
Designation End of programme Childproof lock
Prewash
Water Plus
SpeedPerfect
Door
E:35 / -10 1 1 Example
Tap Error
More information Programme status
Displayen
¡ lights up: The childproof lock is activated.
¡ flashes: The childproof lock is activated and the appliance has been operated. "Deactivating the childproof lock", Page 31
Prewash is activated. "Buttons", Page 22 Wash with more water is activated. "Buttons", Page 22 Short wash activated. "Buttons", Page 22 ¡ Lights up: The door is locked and can-
not be opened. ¡ Flashes: The door is not closed prop-
erly. ¡ Off: The door is unlocked and can be
opened. ¡ No water pressure. ¡ The water pressure is too low. Error code, error display, signal.
21
enButtons
8Buttons
The selection of programme settings depends on the programme that is set. You can see the selection options for each programme in the overview for "Programmes", Page 23.
Button Start / Reload Speed Perfect
Finish in
Temperature Spin
3 sec. Prewash Aqua Plus
Selection ¡ Start ¡ Cancel ¡ Pause ¡ Activate ¡ Deactivate
Up to 24 hours
90 °C - 1200
¡ Activate ¡ Deactivate ¡ Activate ¡ Deactivate ¡ Activate ¡ Deactivate
More information Start, cancel or pause the programme.
Activate or deactivate a shorter programme duration. Note: Energy consumption increases. The washing result is not affected by this. Set the programme end. The programme duration is already included in the set number of hours. Once the programme has started, the programme duration is displayed. Adjust the temperature in °C. Adjust the spin speed or activate (Rinse Hold). If is selected, the water is not drained at the end of the washing cycle and the spin cycle is deactivated. The laundry remains in the rinsing water. "Childproof lock", Page 31
Activate or deactivate prewash, e.g. for washing heavily soiled laundry. Wash with more water. Recommended for particularly sensitive skin and for treating laundry more gently.
22
Programmesen
9Programmes
Note: The laundry's care labels provide you with additional information about programme selection. Care symbols on the care labels
Programme Cottons Eco 40-60
Cottons Intensive
Description
Max. load (kg)
Wash hard-wearing items made from cotton, linen 8,0
or blended fabrics.
5,0
Also suitable as a short programme for normally
soiled laundry when you activate Speed Perfect.
Programme setting:
¡ Max. 90 °C
¡ Max. 1200 rpm
Wash items made from cotton, linen or blended
8,0
fabrics.
Note: Fabrics which can be washed from 40 °C up to 60 °C as per the care symbol can be washed together. The washing performance corresponds to the best possible washing performance class according to the legal requirements. For this programme, the washing temperature is automatically adjusted depending on the load size, in order to achieve the best possible energy efficiency with the best possible washing result. You cannot change the washing temperature.
Programme setting:
Note: The temperature cannot be adjusted in this programme and is set automatically.
¡ Max. - °C
¡ Max. 1200 rpm
Wash hard-wearing items made from cotton, linen 8,0 or blended fabrics. Energy-saving programme. Note: To save energy, the actual washing temperature may deviate from the set washing temperature. The washing performance meets legal requirements. Programme setting: ¡ Max. 90 °C ¡ Max. 1200 rpm
23
enProgrammes
Programme Easy Care Mixed Load Delicates / Silk
Wool
Rinse Spin / Drain Shirts
Description
Max. load (kg)
Wash items made from synthetic or blended fab- 4,0 rics. Programme setting: ¡ Max. 60 °C ¡ Max. 1200 rpm
Wash items made from cotton, linen, or synthetic or 4,0 blended fabrics. Suitable for lightly soiled laundry. Programme setting: ¡ Max. 60 °C ¡ Max. 1200 rpm
Wash delicate, washable items made from silk, vis- 2,0 cose and synthetic fabrics. Use a detergent that is suitable for delicates or silk. Note: Wash especially delicate items or items with hooks, eyelets or clips in a mesh laundry bag. Programme setting: ¡ Max. 40 °C ¡ Max. 800 rpm
Hand- or machine-washable items that are made 2,0 from wool or contain wool. To prevent the laundry from shrinking, the drum moves the items very gently with long pauses. Use a detergent that is suitable for wool. Programme setting: ¡ Max. 40 °C ¡ Max. 800 rpm
Rinse and then spin the laundry, and drain the wa- ter. Programme setting: Max. 1200 rpm
Spin and drain the water.
If you only want to drain the water, activate 0. The
laundry is not spun.
Programme setting: Max. 1200 rpm
Wash non-iron shirts and blouses made from cot- 2,0 ton, linen, or synthetic or blended fabrics. Note: Use the Delicates / Silk programme to wash shirts and blouses made from silk or delicate fabrics. Programme setting: ¡ Max. 60 °C ¡ Max. 800 rpm
24
Programme Sportswear Down Wear
Curtains
Dark Wash
Programmesen
Description
Max. load (kg)
Wash sports and leisure items made from synthetic 2,0 fibres, microfibre or fleece. Use a detergent that is suitable for sports items. Do not use fabric softener. Tip: Use the Easy Care programme to wash heavily soiled laundry. Programme setting: ¡ Max. 40 °C ¡ Max. 800 rpm
Wash pillows, duvets or clothing stuffed with down 1,5 and fillings with synthetic fibres. Wash large items separately. Use a detergent that is suitable for down or delicates. Use sparingly. Do not use fabric softener. Note: To prevent excessive foaming, remove air from laundry items by rolling them up before you wash them. Programme setting: ¡ Max. 60 °C ¡ Max. 1200 rpm
Wash curtains and blinds.
4,0
Programme for washing heavy curtains up to the
maximum load for the programme or lightweight
curtains measuring 25-30 m².
In order to prevent intensive foaming, use a deter-
gent suitable for curtains when washing lightweight
curtains.
Note: Remove the curtain hooks or wash the curtains in a mesh laundry bag.
Tip: Prewash is activated and can be deactivated.
Programme setting:
¡ Max. 40 °C
¡ Max. 800 rpm
Wash dark-coloured and colour-intense items made 4,0 from cotton or easy-care fabric, e.g. jeans. Turn laundry inside-out before washing. Use liquid detergent. Programme setting: ¡ Max. 40 °C ¡ Max. 1200 rpm
25
enProgrammes
Programme Super Quick 15'/30'
Description
Max. load (kg)
Wash items made from cotton, or synthetic or blen- 4,0 ded fabrics. Short programme for small items of lightly soiled laundry. The programme duration is approx. 30 minutes. If you wish to reduce the programme duration to 15 minutes, activate Speed Perfect. The maximum load is reduced to 2,0 kg. Programme setting: ¡ Max. 40 °C ¡ Max. 1200 rpm
26
Accessoriesen
10Accessories
Use original accessories. These have been made especially for your appliance. Note: Some accessories are available in other colours. Contact "Customer Service", Page 45.
Water inlet hose extension
Fixing brackets Longer water inlet hose
Liquid detergent insert Platform
Use
Order number
Extend the water inlet hose for cold water or AquaStop (approx. 2.50 m).
WMZ2381
Improves the stability of WMZ2200 the appliance.
Replace the standard water inlet hose with a longer hose (2.20 m).
00353925
Measure liquid detergent.
00637516
Install the appliance at a WMZPW20W raised height so that it can be easily loaded and unloaded.
11Laundry
Note: You can find further information in the digital instruction manual by scanning the QR code in the table of contents or on www.boschhome.com.
11.1Preparing the laundry
ATTENTION! Objects remaining in the laundry may damage the laundry and the drum. Remove all items from any pock-
ets in your laundry before using the appliance.
To protect your appliance and the laundry, prepare the laundry beforehand. Empty any pockets Brush sand out of all collars and pockets Close bed covers and cushion covers Close all zips, Velcro fasteners, hooks and eyes Tie cloth belts, apron strings, etc. together or use a laundry bag. Tie together longer drawstrings, and tie cords with solid endpieces in hoods or trousers Remove curtain hooks and lead strips or use a mesh laundry bag
27
enDetergents and care products Use a mesh laundry bag for small items of laundry, such as children's socks Some stubborn or dried-in stains can be removed by washing several times Wash large and small items of laundry together Do not rub fresh stains but dab them with soapy water Separate items of laundry and shake them out, or observe the programme description
12Detergents and care products
Notes ¡ More detailed instructions for use
can be found on www.boschhome.com or by scanning the QR code on the title page of this user manual. ¡ Observe the information on safety Page 4 and preventing material damage Page 10. The manufacturer's instructions for use and dosage can be found on the packaging. Notes ¡ Only use liquid detergents that are self-flowing ¡ Do not mix different liquid detergents ¡ Do not mix detergent and fabric softener ¡ Do not use products that have expired or are highly congealed ¡ Do not use products containing solvents, caustic agents or volatile substances (e.g. bleach) ¡ Use dyes sparingly as salt may damage stainless steel ¡ Do not use bleaching agents in the appliance
28
13Basic operation operation
operation
Note: You can find further information in the digital instruction manual by scanning the QR code in the table of contents or on www.boschhome.com.
13.1Switching on the appliance
Requirement: The appliance has been correctly installed and connected. "Installation and connection", Page 12 Turn the programme selector to a
programme.
13.2Setting a programme
1. Turn the programme selector and set the required programme. "Programmes", Page 23
2. If necessary, adjust the programme settings Page 28.
13.3Adjusting the programme settings
Requirement: A programme has been set. "Setting a programme", Page 28 Adjust the programme settings.
"Buttons", Page 22 Note: The programme settings are not saved permanently for the programme.
13.4Loading laundry
Note: To prevent creasing, take note of the maximum load for the "Programmes", Page 23.
Requirement: The laundry is prepared. "Laundry", Page 27 1. Open the door.
Make sure that the drum is empty. 2. Place the laundry in the drum. 3. Close the door.
Ensure that there is no laundry trapped in the door.
13.5Inserting the measuring aid for liquid detergent
If you order the measuring aid as an accessory, you must use the measuring aid. 1. Pull out the detergent drawer. 2. Press down on the insert and re-
move the detergent drawer.
3. Insert the measuring aid.
operationen
13.6Adding detergent and care product
Notes ¡ Do not use the measuring aid for
liquid detergent for gel detergents, washing powder, or if Prewash or "Ready in" time are activated. ¡ Observe the information about detergents and care products Page 28. 1. Pull out the detergent drawer. 2. Pour in detergent. "Detergent drawer", Page 18 3. If required, add the care product. 4. Push in the detergent drawer.
13.7Starting the programme
Note: If you want to change the time until the programme ends, set the "Ready in" time first. Press Start / Reload. a The drum rotates and load detec-
tion takes place. This can take up to 2 minutes, after which water enters the drum. a The display shows either the programme duration or the "Ready in" time. a After the programme has ended, the display shows: "End".
4. Insert the detergent drawer. 29
enoperation
13.8Changing the activated "Ready in" time
If you have set and activated a "Ready in" time for a delayed programme start, you can change the "Ready in" time again before the programme starts. Requirements ¡ The programme is set.
"Setting a programme", Page 28 ¡ The "Ready in" time is set and ac-
tivated. "Buttons", Page 22 1. Press Start / Reload. The activated "Ready in" time is paused. 2. Press Finish in repeatedly until the display indicates the desired "Ready in" time. 3. Press Start / Reload. The changed "Ready in" time is activated.
13.9Soaking laundry
Note: No additional detergent is required. The washing solution is then used for washing. 1. Start the programme. 2. To pause the programme, after ap-
prox. 10 minutes, press Start / Reload. 3. To resume the programme, after the desired soaking time, press Start / Reload.
13.10Adding laundry
1. Press Start / Reload. The appliance pauses. Note: If appears, it is not possible to add laundry. When goes out, it is possible to add laundry.
30
2. Open the appliance door. 3. Add or remove laundry. 4. Close the appliance door. 5. Press Start / Reload.
13.11Cancelling the programme
1. Press Start / Reload. 2. Open the appliance door.
The appliance door remains locked for safety reasons if the temperature and water levels are high. If the temperature is high, start
the Rinse programme. If the water level is high, start
the Spin programme or select a suitable programme for draining. "Programmes", Page 23 3. Remove the laundry Page 30.
13.12Resuming the programme when the programme status is Rinse Hold
1. Start the Spin programme or select a suitable programme for draining. "Programmes", Page 23
2. Press Start / Reload.
13.13Unloading the laundry
1. Open the appliance door. 2. Remove the laundry.
13.14Switching off the appliance
1. Turn the programme selector to Off.
2. Turn off the tap.
3. Wipe the rubber gasket dry and remove any foreign objects.
Childproof locken So that the programme currently running is not cancelled, the programme selector must be set to the initial programme. a goes out in the display.
4. Leave the appliance door and detergent drawer open so that residual water can evaporate.
14Childproof lock
Secure your appliance against being operated unintentionally using the controls.
14.1Activating the childproof lock
Press and hold the two 3 sec. buttons for approx. 3 seconds.
a The display shows . a The controls are locked. a The childproof lock remains active
even after the appliance has been switched off.
14.2Deactivating the childproof lock
Requirement: To deactivate the childproof lock, the appliance must be switched on. Press and hold the two 3 sec.
buttons for approx. 3 seconds.
15Basic settings
You can configure the basic settings for your appliance to meet your needs. Note: You can find further information in the digital instruction manual by scanning the QR code in the table of contents or on www.boschhome.com.
16Cleaning and servicing
To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully. Note: You can find further information in the digital instruction manual by scanning the QR code in the table of contents or on www.boschhome.com.
16.1Cleaning the drum
CAUTION Risk of injury! Permanently washing at low temperatures and a lack of ventilation for the appliance may damage the drum and cause injury. Regularly run a programme for
cleaning the drum or wash at temperatures of at least 60 °C. Leave the appliance to dry after every operation with the door open, and leave the detergent drawer to dry.
31
enCleaning and servicing Run the Cottons 90° programme
without laundry and using all-purpose washing powder.
16.2Cleaning the detergent drawer
1. Pull out the detergent drawer. 2. Press down on the insert and re-
move the detergent drawer.
4. Clean the detergent drawer and insert with water and a brush, and then dry them.
5. Fit the insert and click it into place.
3. Pull out the insert upwards.
6. Clean the opening for the detergent drawer.
7. Push in the detergent drawer. 32
16.3Cleaning the drain pump
Clean the drain pump in the event of faults, e.g. blockages or rattling noises. Emptying the drain pump 1. Turn off the water tap. 2. Switch off the appliance. 3. Disconnect the appliance's mains
plug from the power supply. 4. Open and remove the service flap.
1 2
5. Slide a sufficiently large container under the opening.
Cleaning and servicingen 6. Take the drain hose out of the
holder.
7.
CAUTION - Risk of scalding!
When you wash at high temperat-
ures, the detergent solution gets
hot.
Do not touch the hot detergent
solution.
To allow the detergent solution to flow out into the container, remove the sealing cap.
8. Firmly press on the sealing cap.
33
enCleaning and servicing 9. Insert the drain hose into the
holder.
3. Ensure that the impeller in the drain pump can rotate.
4. Insert the pump cap.
Cleaning the drain pump Requirement: The drain pump is empty. Page 33 1. Since water may remain in the
drain pump, unscrew the pump cap carefully.
5. Screw the pump cap as far as it will go.
90°
2. Clean the interior, the thread on the pump cap and the pump housing.
The handle on the pump cap must be in a vertical position. 6. Insert and close the service flap.
2 1
34
Before the next wash To prevent unused detergent from flowing straight into the outlet in the next wash, run the Drain programme after you have emptied the drain pump. 1. Turn on the water tap. 2. Insert the mains plug. 3. Switch on the appliance. 4. Pour 1 litre of water into compart-
ment II. 5. Select a suitable programme for
draining. "Programmes", Page 23
Cleaning and servicingen
35
enTroubleshooting
17Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs.
WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist
staff. Only use genuine spare parts when repairing the appliance. If the power cord of this appliance is damaged, it must be replaced by the
manufacturer, the manufacturer's Customer Service or a similarly qualified person in order to prevent any risk.
Fault The display goes out and Start / Reload flashes.
"E:30 / -80"
Cause and troubleshooting Energy-saving mode is active Press any button. a The symbol lights up again. Drain pipe or water outlet hose is blocked. Clean the drain pipe and the water outlet hose. Drain pipe or water drain hose is caught or jammed. Ensure that the drain pipe and water drain hose are
not kinked or trapped. Drain pump is blocked. "Cleaning the drain pump", Page 33 The water outlet hose is connected too high. Install the water outlet hose at a maximum height of
1 metre. Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric
softener with 0.5 litres of water and pour the mixture into the left-hand compartment (not for outdoor clothing, sportswear or items stuffed with down). Reduce the amount of detergent for the next washing cycle with the same load. Unapproved extension installed on the water drain hose. Remove any unapproved extensions from the water hose. Connecting the appliance The pump cap is not fully screwed in.
36
Troubleshootingen
Fault "E:30 / -80" "E:36 / -25 / -26"
lights up.
flashes. All other error codes. "E:30/-20"
Cause and troubleshooting Ensure that the pump cap is screwed in all the way
into the appliance. The handle on the pump cap must be in a vertical position. "Cleaning the drain pump", Page 34 Drain pump is blocked. "Cleaning the drain pump", Page 33 The water pressure is low. No remedial action possible. The filters in the water inflow are blocked. Clean the filters in the water inflow. The tap is turned off. Turn on the tap. The water inlet hose is kinked or jammed. Ensure that the water inlet hose is not kinked or jammed. The temperature is too high. Wait until the temperature has dropped. "Cancelling the programme", Page 30 Water level is too high. Select a suitable programme for draining. "Programmes", Page 23 Laundry is caught in the door. 1. Open the door again. 2. Remove any trapped laundry. 3. Close the door. 4. Press Start / Reload to start the programme. Door is not closed. 1. Close the door. 2. Press Start / Reload to start the programme. Malfunction Call the after-sales service. "Customer Service", Page 45 Solenoid valve defective. Call the after-sales service. "Customer Service", Page 45 Detergent dosage is too high. Reduce the amount of detergent for the next washing cycle with the same load. Additional water is added.
37
enTroubleshooting
Fault "E:30/-20" The appliance is not working. The programme does not start.
The door cannot be opened.
Cause and troubleshooting Do not add any extra water to the appliance while it
is operating. The mains plug of the power cord is not plugged in. Connect the appliance to the power supply. The circuit breaker in the fuse box has tripped. Check the circuit breaker in the fuse box. There has been a power cut. Check whether the lighting in your kitchen or other
appliances are working. You have not pressed Start / Reload. Press Start / Reload. Door is not closed. 1. Close the door. 2. Press Start / Reload to start the programme. Childproof lock is activated. "Deactivating the childproof lock", Page 31 Finish in is activated. Check whether Finish in is activated.
"Buttons", Page 22 Laundry is caught in the door. 1. Open the door again. 2. Remove any trapped laundry. 3. Close the door. 4. Press Start / Reload to start the programme. is activated. Continue the programme by selecting Spin or
Drain and pressing Start / Reload. "Resuming the programme when the programme status is Rinse Hold", Page 30 The temperature is too high. Wait until the temperature has dropped. "Cancelling the programme", Page 30 Water level is too high. Select a suitable programme for draining. "Programmes", Page 23 Power failure. Open the door using the emergency release. "Emergency release", Page 44
38
Troubleshootingen
Fault
Cause and troubleshooting
The water is not drain- Drain pipe or water outlet hose is blocked.
ing.
Clean the drain pipe and the water outlet hose.
Drain pipe or water drain hose is caught or jammed. Ensure that the drain pipe and water drain hose are
not kinked or trapped.
Drain pump is blocked. "Cleaning the drain pump", Page 33
is activated. Continue the programme by selecting Spin or
Drain and pressing Start / Reload. "Resuming the programme when the programme status is Rinse Hold", Page 30
The water outlet hose is connected too high. Install the water outlet hose at a maximum height of
1 metre.
Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric
softener with 0.5 litres of water and pour the mixture into the left-hand compartment (not for outdoor clothing, sportswear or items stuffed with down). Reduce the amount of detergent for the next washing cycle with the same load.
Unapproved extension installed on the water drain hose. Remove any unapproved extensions from the water
hose. Connecting the appliance
The pump cap is not fully screwed in. Ensure that the pump cap is screwed in all the way
into the appliance. The handle on the pump cap must be in a vertical position. "Cleaning the drain pump", Page 34
Water is not flowing in. Detergent is not being dispensed.
You have not pressed Start / Reload. Press Start / Reload. The filters in the water inflow are blocked. Clean the filters in the water inflow.
The tap is turned off. Turn on the tap.
The water inlet hose is kinked or jammed. Ensure that the water inlet hose is not kinked or
jammed.
39
enTroubleshooting
Fault The spin cycle runs several times.
The programme duration changes during the wash cycle.
No water is visible in the drum. Drum jerks after the programme starts. Residual water is present in the compartment . Vibrations and movement of the appliance whilst spinning. Drum rotates, water does not flow in.
Cause and troubleshooting The unbalanced load detection system eliminates an imbalance by repeatedly redistributing the laundry. Not a fault no action required. Note: When loading, where possible, place large and small items of laundry together in the drum. Different sized items of laundry distribute themselves better during the spin cycle. The programme operation is optimised electronically. This may change the programme duration. Not a fault no action required. The unbalanced load detection system eliminates an imbalance by repeatedly redistributing the laundry. Not a fault no action required. Note: When loading, where possible, place large and small items of laundry together in the drum. Different sized items of laundry distribute themselves better during the spin cycle. Foam detection system switches on a rinse cycle if foam build-up is too high. Not a fault no action required. Water is below the visible area. Not a fault no action required. Do not add any extra water to the appliance while it
is operating. This is caused by an internal motor test. Not a fault no action required. Insert in compartment is blocked. "Cleaning the detergent drawer", Page 32
Appliance is not correctly aligned. Aligning the appliance The appliance feet are not fixed. Secure the appliance feet. Aligning the appliance Transit bolts have not been removed. Removing the transit bolts. Load detection is active. Not a fault no action required. Note: The load detection can take up to two minutes.
40
Troubleshootingen
Fault Heavy foam build-up High spin speed not reached.
The spin programme does not start.
Rushing, hissing noise. Loud noises during the spin cycle.
Cause and troubleshooting Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric
softener with 0.5 litres of water and pour the mixture into the left-hand compartment (not for outdoor clothing, sportswear or items stuffed with down). Reduce the amount of detergent for the next washing cycle with the same load. A low spin speed is selected. The next time you run a wash cycle, set a higher spin speed. Unbalance load detection system is using a reduced spin speed to eliminate an unbalance. Redistribute the laundry in the drum.
Note: Where possible, mix large and small items in the drum. Different sized items of laundry distribute themselves better during the spin cycle. Start the Spin programme. Drain pipe or water outlet hose is blocked. Clean the drain pipe and the water outlet hose. Drain pipe or water drain hose is caught or jammed. Ensure that the drain pipe and water drain hose are
not kinked or trapped. The unbalanced load detection system has interrupted the spin cycle because the laundry is unevenly distributed. Redistribute the laundry in the drum.
Note: Where possible, mix large and small items in the drum. Different sized items of laundry distribute themselves better during the spin cycle. Start the Spin programme. Water is flushed under pressure into the detergent drawer. Not a fault normal operating noise. Appliance is not correctly aligned. Aligning the appliance The appliance feet are not fixed. Secure the appliance feet. Aligning the appliance Transit bolts have not been removed. Removing the transit bolts.
41
enTroubleshooting
Fault
Cause and troubleshooting
Banging noises, rattling in the drain pump.
Foreign bodies have got into the drain pump. "Cleaning the drain pump", Page 33
Slurping, rhythmical suction noise.
The drain pump is active, the detergent solution is pumped out. Not a fault normal operating noise.
Creasing.
The spin speed is too high. The next time you run a wash cycle, set a lower
spin speed.
The load is too large. The next time you run a wash cycle, reduce the
amount of laundry being loaded.
Unsuitable programme for the type of fabric. Select the programmes that are suitable for the
type of fabric.
Detergent or fabric Too much detergent/fabric softener in the detergent
softener drips off the drawer.
seal and collects on When dosing liquid detergent and fabric softener,
the door or in the seal observe the marking in the detergent drawer and
fold.
do not dose above this.
The spin result is not satisfactory. The laundry is too wet/too damp.
A low spin speed is selected. The next time you run a wash cycle, set a higher
spin speed. Start the Spin programme.
Drain pipe or water outlet hose is blocked. Clean the drain pipe and the water outlet hose.
Drain pipe or water drain hose is caught or jammed. Ensure that the drain pipe and water drain hose are
not kinked or trapped.
The unbalanced load detection system has interrupted the spin cycle because the laundry is unevenly distributed. Redistribute the laundry in the drum.
Note: Where possible, mix large and small items in the drum. Different sized items of laundry distribute themselves better during the spin cycle.
Start the Spin programme.
Unbalance load detection system is using a reduced spin speed to eliminate an unbalance. Redistribute the laundry in the drum.
42
Troubleshootingen
Fault The spin result is not satisfactory. The laundry is too wet/too damp.
Cause and troubleshooting Note: Where possible, mix large and small items in the drum. Different sized items of laundry distribute themselves better during the spin cycle.
Start the Spin programme.
Detergent residue on Detergents may contain water-insoluble substances the damp washing. that deposit on the laundry.
Start the Rinse programme.
Detergent residue on Detergents may contain water-insoluble substances
the dry laundry.
that deposit on the laundry.
Brush out the laundry after washing and drying.
Water is leaking out at Water inlet hose is not correctly/securely connected. the water inlet hose. 1. Connect the water supply hose correctly. Connect-
ing the water inlet hose 2. Tighten the screw connection.
Water is leaking out at The water outlet hose is damaged. the water outlet hose. Replace the damaged water outlet hose.
Water outlet hose is not connected correctly. Connect the water outlet hose correctly. Water out-
let connection types
Odours have formed in the appliance.
Humidity and detergent residue may promote the formation of bacteria. "Cleaning the drum", Page 31 If you are not using the appliance, leave the door
and detergent drawer open so that residual water can evaporate.
43
enTransportation, storage and disposal
17.1Emergency release
Releasing the door Requirement: The drain pump is empty. Page 33 1. ATTENTION! Escaping water may
cause material damage. Do not open the door if you can
see water through the glass. Pull the emergency release downwards with a tool and release.
3. Switch off the appliance. 4. Unplug the appliance's mains plug. 5. Drain the water.
"Cleaning the drain pump", Page 33 6. Detach the hoses.
18.2Inserting the transit bolts
Secure the appliance for transportation using transit bolts in order to prevent damage. 1. Use a screwdriver to remove the 4
cover caps.
a The door lock is released. 2. Insert the maintenance flap and
lock it into place. 3. Close the maintenance flap.
18Transportation, storage and disposal
You can find out here how to prepare your appliance for transportation and storage. You will also find out how to dispose of old appliances.
18.1Removing the appliance
Note: You can find further information in the digital instruction manual by scanning the QR code in the table of contents or on www.boschhome.com. 1. Turn off the water tap. 2. Empty the water inlet hose.
44
Keep the cover caps. 2. Install the 4 transit bolts. Refer to
the description Removing the transit bolts for this and proceed in reverse order.
18.3Using the appliance again
For further information, see "Installation and connection", Page 12 and "Before using for the first time", Page 19.
18.4Disposing of old appliance
Valuable raw materials can be reused by recycling.
WARNING Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. Do not install the appliance behind
a door as this may obstruct the appliance door or prevent it from opening. With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close. 1. Unplug the appliance from the mains. 2. Cut through the power cord. 3. Dispose of the appliance in an environmentally friendly manner. Information about current disposal methods are available from your specialist dealer or local authority.
This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.
Customer Serviceen
19Customer Service
If you have any queries on use, are unable to rectify faults on the appliance yourself or if your appliance needs to be repaired, contact Customer Service. Function-relevant genuine spare parts according to the corresponding Ecodesign Order can be obtained from Customer Service for a period of at least 10 years from the date on which your appliance was placed on the market within the European Economic Area. Note: Under the terms of the manufacturer's warranty the use of Customer Service is free of charge. Detailed information on the warranty period and terms of warranty in your country is available from our aftersales service, your retailer or on our website. If you contact Customer Service, you will require the product number (ENr.) and the production number (FD) of your appliance. The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website.
19.1Product number (E-Nr.) and production number (FD)
You can find the product number (ENr.) and the production number (FD) on the appliance's rating plate. Depending on the model, the rating plate is located: ¡ On the inside of the door. ¡ On the inside of the maintenance
flap. ¡ On the rear of the appliance.
45
enCustomer Service Make a note of your appliance's details and the Customer Service telephone number to find them again quickly.
46
Consumption valuesen
20Consumption values
The following information is provided in accordance with the EU Ecodesign Regulation. The values given for programs other than the Eco 40-60 are indicative only and were determined in accordance with the applicable standard EN60456.
Programme
Load (kg)
Pro- Energy
gramm con-
e dura- sump-
tion
tion
(h:min)1 (kWh/
cycle)1
Water consumption (l/ cycle)1
Max- Spin imum speed temper- (rpm)1 ature (°C) 5 mins1
Residual moisture (%)1
Eco 40-602 8,0
3:29 1,048 65,0 46
1200 50,00
Eco 40-602 4,0
2:43 0,561 45,0 37
1200 52,00
Eco 40-602 2,0
2:33 0,223 33,0 24
1200 58,00
Cot-
8,0
tons 20 °C
3:14 0,350 85,0 23
1200 58,00
Cot-
8,0
tons 40 °C
3:14 1,170 85,0 44
1200 58,00
Cot-
8,0
tons 60 °C
3:14 1,440 85,0 56
1200 58,00
Cot-
8,0
tons 40 °C +
Prewash
3:44 1,200 85,0 44
1200 58,00
Easy
4,0
Care 40 °C
2:29 0,770 63,0 43
1200 30,00
Mixed
4,0
Load 40 °C
1:00 0,620 44,0 41
1200 60,00
2,0
Wool 30 °C
0:41 0,220 40,0 22
800
25,00
1 Due to the influence of water pressure, hardness and inlet temperature, ambient temperature, type, amount and soiling of laundry, detergent used, fluctuations in the power supply and the selected additional functions, the actual values may deviate from the stated values.
2 Test programme in accordance with the EU Ecodesign Directive and the EU Energy Labelling Regulation with cold water (15 °C).
47
en Technical data
21 Technical data
Appliance height 84,8 cm
Appliance width 59,8 cm
Appliance depth 60,0 cm
Weight
70,2 kg1
Maximum load 8,0 kg
Mains voltage
220-240 V, 50 Hz
Minimum in- 10 A stallation protection
Nominal power 2300 W
Power consumption
¡ Off mode: 0,12 W
¡ Left-on mode: 0,50 W
Water pressure
¡ Minimum: 100 kPa (1 bar)
¡ Maximum: 1000 kPa (10 bar)
Length of the wa- 150 cm ter inlet hose
Length of the wa- 150 cm ter outlet hose
Length of the power cable
210 cm
1 Depending on the appliance specifications
You can find more information about your model online at https://eprel.ec.europa.eu/1. This web address is linked to the official EU EPREL product database. Please then follow the instructions on searching for the model. The model identifier is made up of the characters before the slash in the product
number (E-Nr.) on the rating plate. Alternatively, you can also find the model identifier in the first line of the EU energy label.
1 Only applies to countries in the European Economic Area 48
Thank you for buying a Bosch Home Appliance!
Register your new device on MyBosch now and profit directly from:
· Expert tips & tricks for your appliance · Warranty extension options · Discounts for accessories & spare-parts · Digital manual and all appliance data at hand · Easy access to Bosch Home Appliances Service
Free and easy registration also on mobile phones: www.bosch-home.com/welcome
Looking for help? You'll find it here.
Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.
Robert Bosch Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY www.bosch-home.com
*9001694447*
9001694447 (011104) en
Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom
ST4 PDF Engine (Build 9.0.3.0) SCHEMA ST4