FOLDING DRONE WITH OBSTACLE AVOIDANCE FUNCTION OPERATING MANUAL

Accessories (配件表)

Standard Accessories:

• Drone ?
• Remote Control ?
• Battery ?
• USB Charging Cable ?
• Spare Propellers ⚙️⚙️⚙️⚙️
• Screwdriver ?
• Protective Guards (4 pcs)
• Operating Manual ?

Optional Accessories List (可选配件表):

• Additional Battery ?
• Spare Propellers ⚙️⚙️⚙️⚙️

Pre-Flight Preparation (飞行前准备)

1. Charge the Battery: Connect the battery ? to the USB charging cable ? and a power source. [Charging Icon]
2. Install Battery: Insert the charged battery ? into the drone's ? battery compartment until it clicks.
3. Install Propellers: Attach the propellers ⚙️ to the drone's motors. Ensure correct A/B propeller placement and secure with screws using the screwdriver ?.
4. Install Protective Guards: Attach the protective guards to the drone's arms for safety.
5. Prepare Remote Control: Install batteries into the remote control ? and extend the antenna.

Know Your Drone (了解您的无人机)

The drone features the following components:

• Front Obstacle Avoidance Sensor [Sensor Icon]
• Front LED Light
• Propeller ⚙️
• Motor
• Battery Compartment
• Rear Obstacle Avoidance Sensor [Sensor Icon]
• Camera ?
• Landing Gear

Know Your Remote Control (了解您的遥控器)

The remote control includes:

• Left Joystick: Controls Throttle and Yaw.
• Right Joystick: Controls Pitch and Roll.
• Power Button: Turns the remote control on/off.
• Mode/Speed Button: Switches between Headless Mode and flight speed settings.
• Return-to-Home Button: Initiates automatic return to the takeoff point.
• Camera Control Button: Takes photos.
• Video Record Button: Starts/stops video recording.
• Antenna
• Battery Compartment
• Phone Holder (for FPV display)

Installation of Propeller (安装螺旋桨)

Correct propeller installation is crucial for flight stability.

• Propellers marked 'A' should be installed on motors marked 'A', and propellers marked 'B' on motors marked 'B'.
• Ensure propellers are securely fastened to the motors.
• Use the provided screwdriver ? to tighten the screws, ensuring they are snug but not overtightened.
• Diagram shows propellers with arrows indicating correct rotation for installation (CW/CCW).

Installation of Protective Guard (安装保护架)

Protective guards enhance safety by preventing propeller contact.

• Align each protective guard with the corresponding mounting points on the drone's arms.
• Press firmly until the guard is securely attached.

Installation of Battery (安装电池)

Proper battery installation ensures reliable power supply.

• Slide the drone's battery ? into the designated battery compartment.
• Push the battery in until it clicks securely into place.
• Ensure the battery is fully seated for optimal connection.

Important Battery Precautions (重要电池生产)

Handle the battery with care to ensure safety and longevity.

• ⚠️ Do not disassemble or puncture the battery.
• ⚠️ Do not expose the battery to high temperatures (above 60°C/140°F).
• ⚠️ Do not short-circuit the battery terminals.
• ⚠️ Only use the original charger provided with the drone.
• ⚠️ Keep batteries away from children.
• ⚠️ Dispose of used batteries properly according to local environmental regulations.

Service Introduction of Transmitter (遥控器服务介绍)

Fine-Tuning Function (微调功能)

The fine-tuning function allows for precise adjustments to drone flight characteristics.

• If the drone drifts left or right during flight, use the fine-tuning buttons associated with the left joystick to correct the drift.
• If the drone drifts forward or backward, use the fine-tuning buttons associated with the right joystick to correct the drift.
• A dedicated button allows resetting fine-tuning to default values.

Camera Angle Adjustment (云台角度调节)

Adjust the camera's viewing angle remotely.

• Use the designated dial or button on the remote control to tilt the camera up or down, capturing desired aerial views.

FAQ (常见问题解答)

Q1: The drone cannot take off.

• Ensure the battery ? is fully charged.
• Verify that propellers ⚙️ are installed correctly and securely.
• Confirm the remote control ? is properly paired with the drone ?.

Q2: The drone is unstable in flight.

• Check for adverse weather conditions, such as strong winds.
• Ensure all propellers ⚙️ are balanced and correctly installed.
• Perform the fine-tuning procedure as described above.

Q3: The remote control signal is weak.

• Extend the remote control antenna fully.
• Move closer to the drone ?.
• Minimize interference from other electronic devices or large metal objects.

Q4: The drone loses connection.

• Check battery levels for both the drone ? and the remote control ?.
• Ensure you are within the operational range.
• Attempt to re-pair the remote control ? with the drone ?.