This document serves as the Function Manual for the SINUMERIK 840D sl and 828D CNC systems, detailing their Basic Functions. It is designed to provide essential information for professionals involved in the operation and implementation of these advanced control systems.
The manual covers a wide range of critical topics, including fundamental safety instructions, detailed explanations of NC/PLC interface signals and functions, axis monitoring capabilities, and the configuration of protection zones. Users will find comprehensive guidance on continuous-path mode, acceleration parameters, and procedures for traveling to a fixed stop.
Furthermore, the document delves into velocity control, setpoint and actual value systems, and closed-loop control mechanisms. It also addresses auxiliary function outputs to the PLC, mode group and channel operations, program execution, reset responses, and the definition of axis types, coordinate systems, and frames.
Key operational aspects such as emergency stop procedures, transverse axes, basic PLC programming for both SINUMERIK 840D sl and 828D, referencing, spindles, feedrates, and tool offset management are thoroughly explained.
For additional resources and support, users are directed to the Siemens industry support portal at www.siemens.com/motioncontrol/docu. Questions or suggestions regarding the technical documentation can be sent to docu.motioncontrol@siemens.com.
