User Manual
TTQ DX06 Wireless Lavalier Microphones
Package List
The package includes:
- Charging Case
- Transmitter ×2
- Receiver ×1
- Instruction Manual
- Storage Bag
- Charging Cable ×1
- Headphone Cable ×2
- Type-C Adapter Cable
- iPhone Adapter Cable
- Windproof Cover ×2
Product Features
Transmitter (TX)
Diagrams show the front, back, and side views of the transmitter. The front view displays a screen and indicator lights. The back view has a clip. The side view shows buttons and ports.
- [1] In-built Mic
- [2] Power Button: Press for 3s to Switch On/Off. One Click to Mute/Unmute. Double Click to Bluetooth On/Off. Press 5 times for Reset.
- [3] Channel Selection Button: One Click for Cyclic Switching between Noise Reduction / Original Sound / Reverb Mode. Default is Noise Reduction Mode.
- [4] Power Indicator: Red light ? flashes when power is below 30%. Blue light ? is always on when power is above 30%.
- [5] Mute Indicator
- [6] Connectivity Indicator: Pairing---Blue Light ? On, Unpairing---Blue Light ? Flash.
- [7] Channel Selection Indicator: Blue---Noise Reduction, Red---Reverb, Green---Original Sound.
- [8] Bluetooth Indicator
- [9] 3.5mm TRS Input
- [10] USB-C Connector
Note: The right device is TX 1, the left device is TX 2.
Receiver (RX)
Diagrams show the top, front, and side views of the receiver. The top view has a display screen. The front view shows a clip and indicator lights. The side view shows buttons and ports.
- [1] Power Button: Press for 3s to Switch On/Off. One Click to Screen On/Off. Double Click to Dodge Mode On/Off. Press 5 times for Reset.
- [2] Volume Button: 5 levels available, default 4.
- [3] Transmitter Switch Button: Press to select TX 1 or 2. Double-click volume button to mute/unmute corresponding device, or one-click volume button to volume up corresponding device.
- [4] Power Indicator: Red light ? flashes when power is below 30%. Blue light ? is always on when power is above 30%.
- [5] 3.5mm TRS Output
- [6] USB-C Connector
- [7] Display Screen
Mode Status
The display screen shows the current mode. Blue light ? indicates the device is on; gray light indicates it is off.
- [BT-Bluetooth Accompaniment Mode]: Connect another phone via Bluetooth to play audio as accompaniment.
- [DODGE-Dodge Mode]: The microphone automatically adjusts the volume of background music when you are talking or not.
- [NC-Noise Reduction mode]
- [OST-Original Mode]
- [REB-Reverb Mode]
Charging Case
Diagrams show the top and front views of the charging case, featuring a power indicator light and a Type-C port.
Power Indicator of Charging Case
Open the case to check the light indicator.
| Status | Indicator |
|---|---|
| 30% or less | Alternating red ? and green ? lights flash for 3s |
| 30% < to ≤70% | Green ? light flashes for 3s |
| 70% < to <99% | Green ? light flashes for 3s |
| =100% | Green ? light lights on for 3s |
Power Indicator of Device Charging Status
Close the case and check the light indicator. RT and XT are charging: red light ? lights on. RT and XT are fully charged: lights off.
Power Indicator of Case Charging Status
Insert Type-C cable and check the light indicator. Case is charging: red light ? flashes. Case is fully charged: red light ? lights on.
Connectivity
Diagrams illustrate connection steps:
- [1]: Shows the receiver (RX) and transmitter (TX) being taken out of the charging case, and then connected to a camera.
- [2]: Shows the receiver (RX) connected to a smartphone via a cable.
- [3]: Shows the transmitter (TX) clipped to clothing.
- Open case, take out RX and TX.
- Connect RX with phones or camera.
- RX and TX will be pairing automatically. If not, press the Power Button of RX and TX 5 times for reset.
Product Parameters
Charging Case
| Standby Time: | 100 days |
| Battery Capacity: | 3000MAH/3.7V |
| Charging Time: | 4 hours |
| Working Times: | Fully charged 3 times for 2TX and 1RX |
| Size: | 4.1*2.3*2.1 inches |
RX/TX
| Standby Time: | 180 days |
| Working Time: | 8 hours |
| Charging Time: | 1.5 hours |
| Charging Interface: | Type-c |
| Pointing Type: | Omni-directional condenser mic (-42dB±3dB) |
| Frequency range: | 100Hz-20KHz |
| 2.4G Transmission Distance: | 100Hz-20KHz |
| Bluetooth Transmission Distance: | 50m backward, 100m forward |
| Signal-to-noise Ratio: | 10 meters |
| Battery Capacity: | TX: 250MAH/3.7V RX: 350MAH/3.7V |
| Rated Input: | 4.5V-5.5V |
| Working Temperature: | -10 °C - 45 °C |
| Storage Temperature: | -20 °C - 60 °C |
| Dimension: | 1.8*1.8*0.8 inches |
Notes
- Please disconnect the charger and turn off the product before cleaning.
- Don't disassemble or put any object or liquid into the equipment to avoid causing machine failure.
- Don't place the equipment in the sunlight to avoid early aging of electronic parts.
- Avoid the use of dusty or dirty environment (dust can easily cause equipment failure).
- Don't exceed the ambient temperature of -10 °C - 40 °C and relative humidity of 10%-95%.
- Avoid friction impact with hard objects to cause surface scratches, peeling or other hardware damage.
Customer Support
If you encounter any problems in using the product or need any help, please contact us to get more technical support:
ttq-vip@outlook.com
