Hawkeye 5G Digital Goggles Video Transmission System
User Manual
Hawkeye Digital Camera Video Transmitter Combo
Specifications
| Item | Spec | Remarks |
|---|---|---|
| Input voltage | DC-3.7V | Voltage range: 2.5V-5.5V |
| Standby current | 200mA | Adjustable power test: 3.7V, open WIFI |
| Working current | 230mA~300mA (dynamic) | Adjustable power test: 3.7V, open WIFI |
| Charging current | 250mA | Adjustable power test: 5.0V |
| Power off voltage | 3.35V | Adjustable power test |
| Power off current | <35uA | Adjustable power test |
| SENSOR | 1/4 2 mega pixels | |
| FOV | Horizontal: 80° | |
| FPC type | KC20-V1.0 | |
| Focal length | 30cm | |
| Working temperature | -10°C/+80°C | |
| Indicator | Blue light | Working indicator |
| WIFI Spec Protocol | 802.11 a/n | |
| Modulation mode | OFDM | |
| Working frequency | 1 channel: 5.180GHz; 2 channel: 5.200GHz; 3 channel: 5.220GHz; 4 channel: 5.240GHz; 5 channel: 5.745GHz; 6 channel: 5.765GHz; 7 channel: 5.785GHz; 8 channel: 5.805GHz; 9 channel: 5.825GHz; | |
| Transmission frequency | 18dBm@11b/14dBm@11g/13dBm@11n (Tolerance:+/-2dB) | |
| Receiver sensitivity | 1. 6M: -89dBm@10% PER; 2. 11M:-88dBm@8% PER; 3. 54M:-73dBm@10% PER; 4. 72.2M:-70dBm@10% PER | |
| Working mode | P2P |
Operating Instructions
- Power on: Long press the "power on" button; the blue LED flashes slowly.
- Power off: Long press the "power on" button.
- Charging: Charge using a Type-C cable; the red LED stays on.
- Pairing: Blue LED stays on when paired successfully.
Diagrams and Dimensions
The transmitter unit has dimensions of approximately 43mm x 18mm x 19mm.
The back side of the transmitter is bundled with 2 magnets.
Front side indicators: A blue light indicates working status, and a red light indicates charging status.
5G Digital Goggles Video Transmission System
User Manual
This section details the explorer digital receiver goggles.
Features
- 5G digital wireless receiver screen, light and compact.
- 4.3-inch screen size, displaying clear images transmitted by the digital wireless video transmitter.
- Easy to use.
- High brightness: 500 cd/m².
- Weight: Approximately 350g (excluding a chargeable 18650 battery).
- Compact ergonomic design for an immersive flying experience.
Specifications
| Item | Spec | Remarks |
|---|---|---|
| Input voltage | USB 5V | Voltage range: 5.5V-4.5V. |
| Input voltage | Lithium battery 3.7V | Voltage range: 4.5V-3.4V. |
| Standby current | 400mA | Test by 3.7V |
| Working current | 420-450mA (dynamic) | Test by 3.7V |
| Recording current | 470mA | Test by 3.7V |
| USB charging | 670mA | USB 5V input |
| Power off voltage | 3.45V | Adjustable power test |
| Power off current | 34μA | Tested by 3.7V |
| FFC type | 0.5*16P*L100 reverse | |
| Screen type | RGB, 800*480 | |
| Recording resolution | 800*480 20 frame | |
| Picture resolution | 800*480 | |
| Working temperature | -10°C/+80°C | |
| Indicator | Blue light | Working indicator |
| Indicator | Red light | Charging indicator/low battery indicator |
| Indicator | Green light | Full charge indicator |
| WIFI Spec Protocol | 802.11 a/n | |
| Modulation mode | OFDM | |
| Working frequency | 1 channel: 5.180GHz; 2 channel: 5.200GHz; 3 channel: 5.220GHz; 4 channel: 5.240GHz; 5 channel: 5.745GHz; 6 channel: 5.765GHz; 7 channel: 5.785GHz; 8 channel: 5.805GHz; 9 channel: 5.825GHz; | |
| Transmission frequency | 18dBm@11b/14dBm@11g/13dBm@11n (Tolerance:+/-2dB) | |
| Receiver sensitivity | 6M: -89dBm@10% PER, 11M:-88dBm@8% PER |
FPV Goggles Charging
- The goggles are charged using one 18650 rechargeable battery. When the voltage is too low, the battery indicator shows red on the monitor, indicating a need to recharge.
- Charging Methods:
- Power off the goggles.
- Connect the goggles to a 5V output adapter (like a mobile phone charger) using a Type-C cable.
- A red indicator signifies charging; when charging is finished, the red LED turns off and a green LED turns on.
Operating Instructions
The goggles have several buttons:
- Power on button: Long press for 2 seconds to power on (blue LED turns on). In FPV mode, double-click to open the pairing menu. In menu mode, short press to exit the menu.
- Power off: Long press the power button for 2 seconds (blue LED turns off).
- Recording/Picture Shot button: Short press for a picture shot. Long press to start recording; short press or long press to pause recording.
- Down button: In FPV mode, adjust backlight. In menu mode, move the cursor.
- Menu/Confirm button (M): To access menu settings, press the "M" button. Use the "up/down" buttons to move the cursor and select "camera pairing". Press "M" to confirm. The goggles will search for the camera. Press "M" again to confirm pairing. The goggles will auto power on, and the image should display. If no image appears, power off and on again.
- Up button: In FPV mode, adjust backlight. In menu mode, move the cursor.
- Antenna Interface: SMA inner hole, requires an inner pin antenna.
- Status Indicator:
- Blue LED: Working mode.
- Red LED: Charging mode.
- Green LED: Charging finished.
Schematic Diagram Description
Front Side View:
- 1. Status Indicator (Blue/Red/Green LEDs)
- 2. Recording/Picture Shot button
- 3. Down button
- 4. Menu/Confirm button (M)
- 5. Up button
- 6. Antenna Interface (SMA)
- 7. Power on button
- Type-C interface
- TF memory card slot
Back Side View:
- TF memory card slot
- Type-C interface
- Battery box: Accommodates 1pcs 18650 battery.
Warm Tips
- Please insert the TF card before powering on the goggles. It is recommended to format the TF card before first use.
- If the goggles power on but show no image, it might be due to insufficient power. Ensure the goggles are fully charged before operation.
- If there is no image, verify that the transmitter is working properly and that pairing was successful.
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- (1) This device may not cause harmful interference, and
- (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- - Reorient or relocate the receiving antenna.
- - Increase the separation between the equipment and receiver.
- - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- - Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
