User Manual for VALORE models including: DS101 Led Table Lamp, DS101, Led Table Lamp, Table Lamp, Lamp
6 juil. 2023 — Operation Cautions: 1.Please do not put the lamp on the high-temperature surfaces, and do not use it in flammable or humid.
LED TABLE LAMP User Manual
Thank you for purchasing this product. Please read this instruction carefully to understand its features and safety cautions.
PARTS INDICATOR
FEATURES
Use advanced LED technology, soft light without dazzle and ghosting, protecting your eyes. Long lifespan and low light attenuation. Touch control with three steps brightness and three modes for CCT. Memory function for the brightness and temperature Built-in rechargeable Lithium battery for emergency lighting Folding design, easy to packaging
3 Steps Dimming Built-in Battery
3 Modes CCT
Anti-Radiation
Light Guide Panel Heat emission hole
Blue light: The light is on Red: The battery is charged Green: The battery is fully charged Compound Button/ Adjusting brightness and temperature Adapter socket
OPERATION GUIDE
Table Lamp mode with touch button. When touching this switch button, the lamp is on, and you can touch this button repeatedly to change the brightness and turn off the light with circulation by"minium light-medium light-maximal light-turn off" When you touch this button stays at any brightness step more than 2s, the light changes the temperature with circulation by "warm light-cold light-natural light" When you stays at any brightness and temperature step more than 20s,if you touch this button again, the lamp is off directly. When turning on the lamp next time, the brightness and temperature will be same as last time.
SPECIFICATIONS
Item
LED TABLE LAMP
LED Power
4W
USB Cable Input
5V
3000±250K
CCT
4500±250K
5700±250K
Lifespan
35000h
CRI
80Ra
Center luminance(25cm)
600Lux
Charging Time
5~6h
Working Time
4hours(min) 8hours(max)
Capacity of Battery
2200mAH
Material
ABS+PS
Product size
200x52x260mm
N.W. Colors
410g
White+Silver/White+ Champagne Gold/Black
PACKING LIST
Table Lamp - 1pc USB cable User Manual - 1pc
Maintenance
1. Please clear the lamp every two months to keep it smooth and bright. 2. Just use cleaning cloth and water to clean the dust. 3. For the filthy mark, please use cleaning cloth and soap suds. 4. Please do not clean the lamp by high-volatility and high-corrosive liquid which can make it discoloring or broken.
Operation Cautions:
1.Please do not put the lamp on the high-temperature surfaces, and do not use it in flammable or humid environment, to avoid the breakdown, short circuit etc. 2.The adapter must be under the specialized range. 3.Please steady the base while adjusting the arm. 4.The lamp head can be adjusted freely under the adjustment range. But be cautious and never over adjustment to result in breakdown.
Power off before cleaning. Please ask for the professional person for checking and repairing when it is broken. If any abnormal cases, power off rapidly and contact dealer or manufacturer.
GUARANTEE
User Name: Tel: Address: Purchasing Date: Invoice No.: Item No.: Purchasing Store: Serial No.: Manufacture Date:
LED
//
LED "------" 2"-- --" 20
USB
(25cm)
LED 4W 5V
3000±250K 4500±250K 5700±250K 35000
80Ra 600Lux 5- 6 4 ,8 2200 ABS+PS 200×52×260mm
410g +/+/
USB
,
1,() 2 3 4()
Corel PDF Engine Version 14.0.0.701 CorelDRAW